| Message ID | 1439311351-5268-2-git-send-email-shawnguo@kernel.org |
|---|---|
| State | New |
| Headers | show |
On Wed, Aug 12, 2015 at 12:42:30AM +0800, Shawn Guo wrote: > Hi arm-soc maintainers, > > This is the i.MX device tree updates for 4.3. To resolve the dependency > between imx6ul clock driver and DTS files on those clock ID definitions, > the i.MX clock changes are pulled into the branch. But since i.MX clock > drivers are now in drivers/clk/imx/ folder, I sent the clock changes to > Mike and Stephen. I've already asked them to keep my clock branch > stable/non-reabasable. So it should be safe pull this DT change set > into arm-soc. > > Shawn > > The following changes since commit 787b4271a6a0c09775241770782b22762f40bd6e: > > clk: imx: add imx6ul clk tree support (2015-07-14 15:02:13 +0800) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.3 > > for you to fetch changes up to 360325755336893869c419013ec0e33757432cbb: > > ARM: dts: imx6ul: add snvs power key support (2015-08-11 23:15:27 +0800) > > ---------------------------------------------------------------- > The i.MX device tree updates for 4.3: > - Add audio and eTSEC device support and update dspi node for LS1021A. > - Add initial i.MX6UL and imx6ul-14x14-evk board support, and enable > a bunch of device support for i.MX6UL, including RTC, power key, USB, > QSPI, and dual FEC. > - Enable HDMI and LVDS dual display support for a few imx6qdl boards. > - Support of imx6sl-warp board rev1.12, the version which will be > publicly available for the customers. > - A few i.MX7D device additions, watchdog, cortex-a7 coresight > components, RTC, power key, power off. > - Some Vybrid updates: add device support for I2C, QSPI, eSDHC etc., > update ADC node, and define stdout-path property. > - A few random updates for i.MX27 and i.MX53 devices. > Merged, thanks. -Olof
Hi arm-soc maintainers, This is the i.MX device tree updates for 4.3. To resolve the dependency between imx6ul clock driver and DTS files on those clock ID definitions, the i.MX clock changes are pulled into the branch. But since i.MX clock drivers are now in drivers/clk/imx/ folder, I sent the clock changes to Mike and Stephen. I've already asked them to keep my clock branch stable/non-reabasable. So it should be safe pull this DT change set into arm-soc. Shawn The following changes since commit 787b4271a6a0c09775241770782b22762f40bd6e: clk: imx: add imx6ul clk tree support (2015-07-14 15:02:13 +0800) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.3 for you to fetch changes up to 360325755336893869c419013ec0e33757432cbb: ARM: dts: imx6ul: add snvs power key support (2015-08-11 23:15:27 +0800) ---------------------------------------------------------------- The i.MX device tree updates for 4.3: - Add audio and eTSEC device support and update dspi node for LS1021A. - Add initial i.MX6UL and imx6ul-14x14-evk board support, and enable a bunch of device support for i.MX6UL, including RTC, power key, USB, QSPI, and dual FEC. - Enable HDMI and LVDS dual display support for a few imx6qdl boards. - Support of imx6sl-warp board rev1.12, the version which will be publicly available for the customers. - A few i.MX7D device additions, watchdog, cortex-a7 coresight components, RTC, power key, power off. - Some Vybrid updates: add device support for I2C, QSPI, eSDHC etc., update ADC node, and define stdout-path property. - A few random updates for i.MX27 and i.MX53 devices. ---------------------------------------------------------------- Alison Wang (1): ARM: dts: ls1021a: Add dts nodes for audio on LS1021A Anson Huang (4): ARM: dts: imx6sx: correct property name for wakeup source ARM: dts: imx6ul: enable GPC as extended interrupt controller ARM: dts: imx6ul: add RTC support ARM: dts: imx6ul: add snvs power key support Claudiu Manoil (2): ARM: dts: ls1021a: Add the eTSEC controller nodes ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR Cory Tusar (4): ARM: dts: vf610: Extend I2C support to all available buses. ARM: dts: vf610: Add missing QuadSPI register mapping and names. ARM: dts: vfxxx: Include support for qspi1 functionality. ARM: dts: vfxxx: Include support for esdhc0 functionality. Fabio Estevam (7): ARM: dts: imx6sl-warp: Add the SD2_RESET pin ARM: dts: imx6qdl-sabreauto: Add HDMI support ARM: dts: imx6qdl-sabresd: Allow HDMI and LVDS to work simultaneously ARM: dts: imx6sl-warp: Add changes for rev1.12 ARM: dts: imx6qdl-sabrelite: Allow HDMI and LVDS to work simultaneously ARM: dts: imx6qdl-nitrogen6x: Allow HDMI and LVDS to work simultaneously ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously Frank Li (11): ARM: dts: imx7d: add watch dog support ARM: dts: imx6sx: enable snvs power key ARM: dts: imx7d: add cortex-a7 coresight component Document: dt: binding: imx: update document for imx6ul support ARM: dts: add i.mx6ul pin function include file ARM: dts: imx: add imx6ul and imx6ul evk board support ARM: dts: imx: update snvs to use syscon access register ARM: dts: imx6ul: add usb host and function support ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h ARM: dts: imx6ul: add qspi support ARM: dts: imx7d: enable snvs rtc, onoffkey and power off Fugang Duan (2): ARM: dts: imx: add fec1 and fec2 nodes for SOC i.MX6UL ARM: dts: imx6ul-14x14-evk: add fec1 and fec2 support Haikun Wang (1): ARM: dts: ls1021a: Update 'dspi' device node compatible string Lucas Stach (1): ARM: dts: imx53-qsb: select open-drain mode for i2c1 pads Peter Chen (1): ARM: imx6qdl-sabreauto.dtsi: enable USB support Peter Seiderer (2): ARM: dts: nitrogen6x: add CAN support ARM: dts: sabrelite: add CAN support Philippe Reynes (1): ARM: dts: imx27: add support of internal rtc Sanchayan Maity (1): ARM: dts: vfxxx: Add io-channel-cells property for ADC node Shengjiu Wang (1): ARM: dts: imx6qdl-sabreauto: Add audio support Stefan Agner (2): ARM: dts: vf-colibri: define stdout-path property ARM: dts: add property for maximum ADC clock frequencies Tim Harvey (1): ARM: dts: ventana: add UHS-I support for Ventana boards .../devicetree/bindings/clock/imx6ul-clock.txt | 13 + .../bindings/pinctrl/fsl,imx6ul-pinctrl.txt | 36 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx27.dtsi | 9 + arch/arm/boot/dts/imx53-qsb-common.dtsi | 5 +- arch/arm/boot/dts/imx53-qsrb.dts | 14 +- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 1 - arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 35 +- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 35 +- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 34 +- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 1 - arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 1 - arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 39 + arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 137 +++ arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 39 + arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 7 + arch/arm/boot/dts/imx6qdl.dtsi | 52 +- arch/arm/boot/dts/imx6sl-warp.dts | 32 +- arch/arm/boot/dts/imx6sl.dtsi | 21 +- arch/arm/boot/dts/imx6sx.dtsi | 28 +- arch/arm/boot/dts/imx6ul-14x14-evk.dts | 343 ++++++++ arch/arm/boot/dts/imx6ul-pinfunc.h | 938 +++++++++++++++++++++ arch/arm/boot/dts/imx6ul.dtsi | 707 ++++++++++++++++ arch/arm/boot/dts/imx7d.dtsi | 260 +++++- arch/arm/boot/dts/ls1021a-qds.dts | 89 ++ arch/arm/boot/dts/ls1021a-twr.dts | 81 ++ arch/arm/boot/dts/ls1021a.dtsi | 106 ++- arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +- arch/arm/boot/dts/vfxxx.dtsi | 85 +- 29 files changed, 3062 insertions(+), 90 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx6ul-clock.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt create mode 100644 arch/arm/boot/dts/imx6ul-14x14-evk.dts create mode 100644 arch/arm/boot/dts/imx6ul-pinfunc.h create mode 100644 arch/arm/boot/dts/imx6ul.dtsi