Message ID | 1425385962-3109-1-git-send-email-fabio.estevam@freescale.com |
---|---|
State | New |
Headers | show |
On Tue, Mar 03, 2015 at 09:32:42AM -0300, Fabio Estevam wrote: > imx25-pdk.dts provides a more complete support than the board file version, so > let's get rid of the board file. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- > Changes since v1: > - Rebased against imx/cleanup branch I do not know what went wrong. The v2 still doesn't apply on my branch. $ git am -3 ~/fabio Applying: ARM: mx25: Remove mach-mx25_3ds board file Using index info to reconstruct a base tree... error: removal patch leaves file contents error: arch/arm/mach-imx/mach-mx25_3ds.c: patch does not apply Did you hand edit your patch? It does not apply to blobs recorded in its index. Cannot fall back to three-way merge. Patch failed at 0001 ARM: mx25: Remove mach-mx25_3ds board file Shawn > > arch/arm/mach-imx/Kconfig | 15 --- > arch/arm/mach-imx/Makefile | 1 - > arch/arm/mach-imx/mach-mx25_3ds.c | 270 -------------------------------------- > 3 files changed, 286 deletions(-) > delete mode 100644 arch/arm/mach-imx/mach-mx25_3ds.c > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index f9d17f3..247a465 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -151,21 +151,6 @@ config MACH_MX21ADS > > comment "MX25 platforms:" > > -config MACH_MX25_3DS > - bool "Support MX25PDK (3DS) Platform" > - select IMX_HAVE_PLATFORM_FLEXCAN > - select IMX_HAVE_PLATFORM_FSL_USB2_UDC > - select IMX_HAVE_PLATFORM_IMX2_WDT > - select IMX_HAVE_PLATFORM_IMXDI_RTC > - select IMX_HAVE_PLATFORM_IMX_FB > - select IMX_HAVE_PLATFORM_IMX_I2C > - select IMX_HAVE_PLATFORM_IMX_KEYPAD > - select IMX_HAVE_PLATFORM_IMX_UART > - select IMX_HAVE_PLATFORM_MXC_EHCI > - select IMX_HAVE_PLATFORM_MXC_NAND > - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX > - select SOC_IMX25 > - > config MACH_EUKREA_CPUIMX25SD > bool "Support Eukrea CPUIMX25 Platform" > select IMX_HAVE_PLATFORM_FLEXCAN > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 8d1b101..e92ede9 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -49,7 +49,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o > obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o > > # i.MX25 based machines > -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o > obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o > obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o > obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o > diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c > deleted file mode 100644 > index 584248a..0000000 > -- > 1.9.1 >
On Fri, Mar 6, 2015 at 1:49 AM, Shawn Guo <shawn.guo@linaro.org> wrote: > On Tue, Mar 03, 2015 at 09:32:42AM -0300, Fabio Estevam wrote: >> imx25-pdk.dts provides a more complete support than the board file version, so >> let's get rid of the board file. >> >> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> >> --- >> Changes since v1: >> - Rebased against imx/cleanup branch > > I do not know what went wrong. The v2 still doesn't apply on my branch. Maybe because I generated with -D option. I have sent a v3 without the -D option and it should apply cleanly.
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index f9d17f3..247a465 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -151,21 +151,6 @@ config MACH_MX21ADS comment "MX25 platforms:" -config MACH_MX25_3DS - bool "Support MX25PDK (3DS) Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select SOC_IMX25 - config MACH_EUKREA_CPUIMX25SD bool "Support Eukrea CPUIMX25 Platform" select IMX_HAVE_PLATFORM_FLEXCAN diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 8d1b101..e92ede9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -49,7 +49,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o # i.MX25 based machines -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
imx25-pdk.dts provides a more complete support than the board file version, so let's get rid of the board file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- Changes since v1: - Rebased against imx/cleanup branch arch/arm/mach-imx/Kconfig | 15 --- arch/arm/mach-imx/Makefile | 1 - arch/arm/mach-imx/mach-mx25_3ds.c | 270 -------------------------------------- 3 files changed, 286 deletions(-) delete mode 100644 arch/arm/mach-imx/mach-mx25_3ds.c diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c deleted file mode 100644 index 584248a..0000000