@@ -23,7 +23,7 @@
soc {
adc: adc@40002000 {
- compatible = "efm32,adc";
+ compatible = "energymicro,efm32-adc";
reg = <0x40002000 0x400>;
interrupts = <7>;
clocks = <&cmu clk_HFPERCLKADC0>;
@@ -31,7 +31,7 @@
};
gpio: gpio@40006000 {
- compatible = "efm32,gpio";
+ compatible = "energymicro,efm32-gpio";
reg = <0x40006000 0x1000>;
interrupts = <1 11>;
gpio-controller;
@@ -45,7 +45,7 @@
i2c0: i2c@4000a000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,i2c";
+ compatible = "energymicro,efm32-i2c";
reg = <0x4000a000 0x400>;
interrupts = <9>;
clocks = <&cmu clk_HFPERCLKI2C0>;
@@ -56,7 +56,7 @@
i2c1: i2c@4000a400 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,i2c";
+ compatible = "energymicro,efm32-i2c";
reg = <0x4000a400 0x400>;
interrupts = <10>;
clocks = <&cmu clk_HFPERCLKI2C1>;
@@ -67,7 +67,7 @@
spi0: spi@4000c000 { /* USART0 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,spi";
+ compatible = "energymicro,efm32-spi";
reg = <0x4000c000 0x400>;
interrupts = <3 4>;
clocks = <&cmu clk_HFPERCLKUSART0>;
@@ -77,7 +77,7 @@
spi1: spi@4000c400 { /* USART1 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,spi";
+ compatible = "energymicro,efm32-spi";
reg = <0x4000c400 0x400>;
interrupts = <15 16>;
clocks = <&cmu clk_HFPERCLKUSART1>;
@@ -87,7 +87,7 @@
spi2: spi@4000c800 { /* USART2 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,spi";
+ compatible = "energymicro,efm32-spi";
reg = <0x4000c800 0x400>;
interrupts = <18 19>;
clocks = <&cmu clk_HFPERCLKUSART2>;
@@ -95,7 +95,7 @@
};
uart0: uart@4000c000 { /* USART0 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c000 0x400>;
interrupts = <3 4>;
clocks = <&cmu clk_HFPERCLKUSART0>;
@@ -103,7 +103,7 @@
};
uart1: uart@4000c400 { /* USART1 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c400 0x400>;
interrupts = <15 16>;
clocks = <&cmu clk_HFPERCLKUSART1>;
@@ -111,7 +111,7 @@
};
uart2: uart@4000c800 { /* USART2 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c800 0x400>;
interrupts = <18 19>;
clocks = <&cmu clk_HFPERCLKUSART2>;
@@ -119,7 +119,7 @@
};
uart3: uart@4000e000 { /* UART0 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000e000 0x400>;
interrupts = <20 21>;
clocks = <&cmu clk_HFPERCLKUART0>;
@@ -127,7 +127,7 @@
};
uart4: uart@4000e400 { /* UART1 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000e400 0x400>;
interrupts = <22 23>;
clocks = <&cmu clk_HFPERCLKUART1>;
@@ -135,28 +135,28 @@
};
timer0: timer@40010000 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010000 0x400>;
interrupts = <2>;
clocks = <&cmu clk_HFPERCLKTIMER0>;
};
timer1: timer@40010400 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010400 0x400>;
interrupts = <12>;
clocks = <&cmu clk_HFPERCLKTIMER1>;
};
timer2: timer@40010800 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010800 0x400>;
interrupts = <13>;
clocks = <&cmu clk_HFPERCLKTIMER2>;
};
timer3: timer@40010c00 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010c00 0x400>;
interrupts = <14>;
clocks = <&cmu clk_HFPERCLKTIMER3>;
The mainline drivers were fixed in commits - 4ea8dafd2475 (serial: efm32: use $vendor,$device scheme for compatible string) - 12f6dd860cf8 (spi: efm32: use $vendor,$device scheme for compatible string) - 63cc122381bd (clocksource: efm32: use $vendor,$device scheme for compatible string) which are all in 3.16-rc1 to also support these compatible strings. For the other affected peripherals (adc and gpio) there are no drivers in mainline yet. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- arch/arm/boot/dts/efm32gg.dtsi | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)