new file mode 100644
@@ -0,0 +1,11 @@
+* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
+
+Required properties:
+- compatible: Should be "efm32gg,cmu"
+- reg: Base address and length of the register set
+- interrupts: Interrupt used by the CMU
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock ID in
+its "clocks" phandle cell. The header efm32-clk.h contains a list of available
+IDs.
@@ -11,6 +11,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-composite.o
# SoCs specific
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
+obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
new file mode 100644
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2013 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/efm32-cmu.h>
+
+#define CMU_HFPERCLKEN0 0x44
+
+static struct clk *clk[37];
+static struct clk_onecell_data clk_data = {
+ .clks = clk,
+ .clk_num = ARRAY_SIZE(clk),
+};
+
+static int __init efm32gg_cmu_init(struct device_node *np)
+{
+ int i;
+ void __iomem *base;
+
+ for (i = 0; i < ARRAY_SIZE(clk); ++i)
+ clk[i] = ERR_PTR(-ENOENT);
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_warn("Failed to map address range for efm32gg,cmu node\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ clk[clk_HFXO] = clk_register_fixed_rate(NULL, "HFXO", NULL,
+ CLK_IS_ROOT, 48000000);
+
+ clk[clk_HFPERCLKUSART0] = clk_register_gate(NULL, "HFPERCLK.USART0",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 0, 0, NULL);
+ clk[clk_HFPERCLKUSART1] = clk_register_gate(NULL, "HFPERCLK.USART1",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 1, 0, NULL);
+ clk[clk_HFPERCLKUSART2] = clk_register_gate(NULL, "HFPERCLK.USART2",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 2, 0, NULL);
+ clk[clk_HFPERCLKUART0] = clk_register_gate(NULL, "HFPERCLK.UART0",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 3, 0, NULL);
+ clk[clk_HFPERCLKUART1] = clk_register_gate(NULL, "HFPERCLK.UART1",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 4, 0, NULL);
+ clk[clk_HFPERCLKTIMER0] = clk_register_gate(NULL, "HFPERCLK.TIMER0",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 5, 0, NULL);
+ clk[clk_HFPERCLKTIMER1] = clk_register_gate(NULL, "HFPERCLK.TIMER1",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 6, 0, NULL);
+ clk[clk_HFPERCLKTIMER2] = clk_register_gate(NULL, "HFPERCLK.TIMER2",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 7, 0, NULL);
+ clk[clk_HFPERCLKTIMER3] = clk_register_gate(NULL, "HFPERCLK.TIMER3",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 8, 0, NULL);
+ clk[clk_HFPERCLKACMP0] = clk_register_gate(NULL, "HFPERCLK.ACMP0",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 9, 0, NULL);
+ clk[clk_HFPERCLKACMP1] = clk_register_gate(NULL, "HFPERCLK.ACMP1",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 10, 0, NULL);
+ clk[clk_HFPERCLKI2C0] = clk_register_gate(NULL, "HFPERCLK.I2C0",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 11, 0, NULL);
+ clk[clk_HFPERCLKI2C1] = clk_register_gate(NULL, "HFPERCLK.I2C1",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 12, 0, NULL);
+ clk[clk_HFPERCLKGPIO] = clk_register_gate(NULL, "HFPERCLK.GPIO",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 13, 0, NULL);
+ clk[clk_HFPERCLKVCMP] = clk_register_gate(NULL, "HFPERCLK.VCMP",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 14, 0, NULL);
+ clk[clk_HFPERCLKPRS] = clk_register_gate(NULL, "HFPERCLK.PRS",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 15, 0, NULL);
+ clk[clk_HFPERCLKADC0] = clk_register_gate(NULL, "HFPERCLK.ADC0",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 16, 0, NULL);
+ clk[clk_HFPERCLKDAC0] = clk_register_gate(NULL, "HFPERCLK.DAC0",
+ "HFXO", 0, base + CMU_HFPERCLKEN0, 17, 0, NULL);
+
+ return of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(efm32ggcmu, "efm32gg,cmu", efm32gg_cmu_init);
new file mode 100644
@@ -0,0 +1,42 @@
+#ifndef __DT_BINDINGS_CLOCK_EFM32_CMU_H
+#define __DT_BINDINGS_CLOCK_EFM32_CMU_H
+
+#define clk_HFXO 0
+#define clk_HFRCO 1
+#define clk_LFXO 2
+#define clk_LFRCO 3
+#define clk_ULFRCO 4
+#define clk_AUXHFRCO 5
+#define clk_HFCLKNODIV 6
+#define clk_HFCLK 7
+#define clk_HFPERCLK 8
+#define clk_HFCORECLK 9
+#define clk_LFACLK 10
+#define clk_LFBCLK 11
+#define clk_WDOGCLK 12
+#define clk_HFCORECLKDMA 13
+#define clk_HFCORECLKAES 14
+#define clk_HFCORECLKUSBC 15
+#define clk_HFCORECLKUSB 16
+#define clk_HFCORECLKLE 17
+#define clk_HFCORECLKEBI 18
+#define clk_HFPERCLKUSART0 19
+#define clk_HFPERCLKUSART1 20
+#define clk_HFPERCLKUSART2 21
+#define clk_HFPERCLKUART0 22
+#define clk_HFPERCLKUART1 23
+#define clk_HFPERCLKTIMER0 24
+#define clk_HFPERCLKTIMER1 25
+#define clk_HFPERCLKTIMER2 26
+#define clk_HFPERCLKTIMER3 27
+#define clk_HFPERCLKACMP0 28
+#define clk_HFPERCLKACMP1 29
+#define clk_HFPERCLKI2C0 30
+#define clk_HFPERCLKI2C1 31
+#define clk_HFPERCLKGPIO 32
+#define clk_HFPERCLKVCMP 33
+#define clk_HFPERCLKPRS 34
+#define clk_HFPERCLKADC0 35
+#define clk_HFPERCLKDAC0 36
+
+#endif /* __DT_BINDINGS_CLOCK_EFM32_CMU_H */
This patch adds support for the clocks provided by the Clock Management Unit of Energy Micro's efm32 Giant Gecko SoCs including device tree bindings. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- .../devicetree/bindings/clock/efm32-clock.txt | 11 +++ drivers/clk/Makefile | 1 + drivers/clk/clk-efm32gg.c | 81 ++++++++++++++++++++++ include/dt-bindings/clock/efm32-cmu.h | 42 +++++++++++ 4 files changed, 135 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/efm32-clock.txt create mode 100644 drivers/clk/clk-efm32gg.c create mode 100644 include/dt-bindings/clock/efm32-cmu.h