@@ -339,6 +339,9 @@ ENDPROC(ftrace_stub)
.align 5
ENTRY(vector_swi)
+#ifdef CONFIG_CPU_V7M
+ v7m_exception_entry
+#else
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0 - r12
ARM( add r8, sp, #S_PC )
@@ -349,6 +352,7 @@ ENTRY(vector_swi)
str lr, [sp, #S_PC] @ Save calling PC
str r8, [sp, #S_PSR] @ Save CPSR
str r0, [sp, #S_OLD_R0] @ Save OLD_R0
+#endif
zero_fp
/*
@@ -5,6 +5,7 @@
#include <asm/asm-offsets.h>
#include <asm/errno.h>
#include <asm/thread_info.h>
+#include <asm/v7m.h>
@ Bad Abort numbers
@ -----------------
@@ -44,6 +45,116 @@
#endif
.endm
+#ifdef CONFIG_CPU_V7M
+/*
+ * ARMv7-M exception entry/exit macros.
+ *
+ * xPSR, ReturnAddress(), LR (R14), R12, R3, R2, R1, and R0 are
+ * automatically saved on the current stack (32 words) before
+ * switching to the exception stack (SP_main).
+ *
+ * If exception is taken while in user mode, SP_main is
+ * empty. Otherwise, SP_main is aligned to 64 bit automatically
+ * (CCR.STKALIGN set).
+ *
+ * Linux assumes that the interrupts are disabled when entering an
+ * exception handler and it may BUG if this is not the case. Interrupts
+ * are disabled during entry and reenabled in the exit macro.
+ *
+ * v7m_exception_slow_exit is used when returning from SVC or PendSV.
+ * When returning to kernel mode, we don't return from exception.
+ */
+ .macro v7m_exception_entry
+ @ determine the location of the registers saved by the core during
+ @ exception entry. Depending on the mode the cpu was in when the
+ @ exception happend that is either on the main or the process stack.
+ @ Bit 2 of EXC_RETURN stored in the lr register specifies which stack
+ @ was used.
+ tst lr, #EXC_RET_STACK_MASK
+ mrsne r12, psp
+ moveq r12, sp
+
+ @ we cannot rely on r0-r3 and r12 matching the value saved in the
+ @ exception frame because of tail-chaining. So these have to be
+ @ reloaded.
+ ldmia r12!, {r0-r3}
+
+ @ Linux expects to have irqs off. Do it here before taking stack space
+ cpsid i
+
+ sub sp, #S_FRAME_SIZE-S_IP
+ stmdb sp!, {r0-r11}
+
+ @ load saved r12, lr, return address and xPSR.
+ @ r0-r7 are used for signals and never touched from now on. Clobbering
+ @ r8-r12 is OK.
+ mov r9, r12
+ ldmia r9!, {r8, r10-r12}
+
+ @ calculate the original stack pointer value.
+ @ r9 currently points to the memory location just above the auto saved
+ @ xPSR.
+ @ The cpu might automatically 8-byte align the stack. Bit 9
+ @ of the saved xPSR specifies if stack aligning took place. In this case
+ @ another 32-bit value is included in the stack.
+
+ tst r12, V7M_xPSR_FRAMEPTRALIGN
+ addne r9, r9, #4
+
+ @ store saved r12 using str to have a register to hold the base for stm
+ str r8, [sp, #S_IP]
+ add r8, sp, #S_SP
+ @ store r13-r15, xPSR
+ stmia r8!, {r9-r12}
+ @ store old_r0
+ str r0, [r8]
+ .endm
+
+ /*
+ * PENDSV and SVCALL are configured to have the same exception
+ * priorities. As a kernel thread runs at SVCALL execution priority it
+ * can never be preempted and so we will never have to return to a
+ * kernel thread here.
+ */
+ .macro v7m_exception_slow_exit ret_r0
+ cpsid i
+ ldr lr, =EXC_RET_THREADMODE_PROCESSSTACK
+
+ @ read original r12, sp, lr, pc and xPSR
+ add r12, sp, #S_IP
+ ldmia r12, {r1-r5}
+
+ @ an exception frame is always 8-byte aligned. To tell the hardware if
+ @ the sp to be restored is aligned or not set bit 9 of the saved xPSR
+ @ accordingly.
+ tst r2, #4
+ subne r2, r2, #4
+ orrne r5, V7M_xPSR_FRAMEPTRALIGN
+ biceq r5, V7M_xPSR_FRAMEPTRALIGN
+
+ @ write basic exception frame
+ stmdb r2!, {r1, r3-r5}
+ ldmia sp, {r1, r3-r5}
+ .if \ret_r0
+ stmdb r2!, {r0, r3-r5}
+ .else
+ stmdb r2!, {r1, r3-r5}
+ .endif
+
+ @ restore process sp
+ msr psp, r2
+
+ @ restore original r4-r11
+ ldmia sp!, {r0-r11}
+
+ @ restore main sp
+ add sp, sp, #S_FRAME_SIZE-S_IP
+
+ cpsie i
+ bx lr
+ .endm
+#endif /* CONFIG_CPU_V7M */
+
@
@ Store/load the USER SP and LR registers by switching to the SYS
@ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
@@ -131,6 +242,18 @@
rfeia sp!
.endm
+#ifdef CONFIG_CPU_V7M
+ /*
+ * Note we don't need to do clrex here as clearing the local monitor is
+ * part of each exception entry and exit sequence.
+ */
+ .macro restore_user_regs, fast = 0, offset = 0
+ .if \offset
+ add sp, #\offset
+ .endif
+ v7m_exception_slow_exit ret_r0 = \fast
+ .endm
+#else /* ifdef CONFIG_CPU_V7M */
.macro restore_user_regs, fast = 0, offset = 0
clrex @ clear the exclusive monitor
mov r2, sp
@@ -147,6 +270,7 @@
add sp, sp, #S_FRAME_SIZE - S_SP
movs pc, lr @ return & move spsr_svc into cpsr
.endm
+#endif /* ifdef CONFIG_CPU_V7M / else */
.macro get_thread_info, rd
mov \rd, sp
new file mode 100644
@@ -0,0 +1,142 @@
+/*
+ * linux/arch/arm/kernel/entry-v7m.S
+ *
+ * Copyright (C) 2008 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Low-level vector interface routines for the ARMv7-M architecture
+ */
+#include <asm/memory.h>
+#include <asm/glue.h>
+#include <asm/thread_notify.h>
+#include <asm/v7m.h>
+
+#include <mach/entry-macro.S>
+
+#include "entry-header.S"
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+#error "CONFIG_TRACE_IRQFLAGS not supported on the current ARMv7M implementation"
+#endif
+
+__invalid_entry:
+ v7m_exception_entry
+ adr r0, strerr
+ mrs r1, ipsr
+ mov r2, lr
+ bl printk
+ mov r0, sp
+ bl show_regs
+1: b 1b
+ENDPROC(__invalid_entry)
+
+strerr: .asciz "\nUnhandled exception: IPSR = %08lx LR = %08lx\n"
+
+ .align 2
+__irq_entry:
+ v7m_exception_entry
+
+ @
+ @ Invoke the IRQ handler
+ @
+ mrs r0, ipsr
+ ldr r1, =V7M_xPSR_EXCEPTIONNO
+ and r0, r1
+ mov r1, sp
+ stmdb sp!, {lr}
+ @ routine called with r0 = irq number, r1 = struct pt_regs *
+ bl asm_do_IRQ
+
+ pop {lr}
+ @
+ @ Check for any pending work if returning to user
+ @
+ ldr r1, =BASEADDR_V7M_SCB
+ ldr r0, [r1, V7M_SCB_ICSR]
+ tst r0, V7M_SCB_ICSR_RETTOBASE
+ beq 2f
+
+ get_thread_info tsk
+ ldr r2, [tsk, #TI_FLAGS]
+ tst r2, #_TIF_WORK_MASK
+ beq 2f @ no work pending
+ mov r0, #V7M_SCB_ICSR_PENDSVSET
+ str r0, [r1, V7M_SCB_ICSR] @ raise PendSV
+
+2:
+ @ registers r0-r3 and r12 are automatically restored on exception
+ @ return. r4-r7 were not clobbered in v7m_exception_entry so for
+ @ correctness they don't need to be restored. So only r8-r11 must be
+ @ restored here. The easiest way to do so is to restore r0-r7, too.
+ ldmia sp!, {r0-r11}
+ add sp, #S_FRAME_SIZE-S_IP
+ cpsie i
+ bx lr
+ENDPROC(__irq_entry)
+
+__pendsv_entry:
+ v7m_exception_entry
+
+ ldr r1, =BASEADDR_V7M_SCB
+ mov r0, #V7M_SCB_ICSR_PENDSVCLR
+ str r0, [r1, V7M_SCB_ICSR] @ clear PendSV
+
+ @ execute the pending work, including reschedule
+ get_thread_info tsk
+ mov why, #0
+ b ret_to_user
+ENDPROC(__pendsv_entry)
+
+/*
+ * Register switch for ARMv7-M processors.
+ * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
+ * previous and next are guaranteed not to be the same.
+ */
+ENTRY(__switch_to)
+ .fnstart
+ .cantunwind
+ add ip, r1, #TI_CPU_SAVE
+ stmia ip!, {r4 - r11} @ Store most regs on stack
+ str sp, [ip], #4
+ str lr, [ip], #4
+ mov r5, r0
+ add r4, r2, #TI_CPU_SAVE
+ ldr r0, =thread_notify_head
+ mov r1, #THREAD_NOTIFY_SWITCH
+ bl atomic_notifier_call_chain
+ mov ip, r4
+ mov r0, r5
+ ldmia ip!, {r4 - r11} @ Load all regs saved previously
+ ldr sp, [ip]
+ ldr pc, [ip, #4]!
+ .fnend
+ENDPROC(__switch_to)
+
+ .data
+ .align 8
+/*
+ * Vector table (64 words => 256 bytes natural alignment)
+ */
+ENTRY(vector_table)
+ .long 0 @ 0 - Reset stack pointer
+ .long __invalid_entry @ 1 - Reset
+ .long __invalid_entry @ 2 - NMI
+ .long __invalid_entry @ 3 - HardFault
+ .long __invalid_entry @ 4 - MemManage
+ .long __invalid_entry @ 5 - BusFault
+ .long __invalid_entry @ 6 - UsageFault
+ .long __invalid_entry @ 7 - Reserved
+ .long __invalid_entry @ 8 - Reserved
+ .long __invalid_entry @ 9 - Reserved
+ .long __invalid_entry @ 10 - Reserved
+ .long vector_swi @ 11 - SVCall
+ .long __invalid_entry @ 12 - Debug Monitor
+ .long __invalid_entry @ 13 - Reserved
+ .long __pendsv_entry @ 14 - PendSV
+ .long __invalid_entry @ 15 - SysTick
+ .rept 64 - 16
+ .long __irq_entry @ 16..64 - External Interrupts
+ .endr