@@ -20,7 +20,6 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
@@ -76,13 +75,6 @@ static DEFINE_SPINLOCK(boot_lock);
static void __cpuinit exynos_secondary_init(unsigned int cpu)
{
/*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
- /*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
@@ -17,7 +17,6 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/smp_scu.h>
@@ -25,11 +24,6 @@
extern void secondary_startup(void);
-static void __cpuinit highbank_secondary_init(unsigned int cpu)
-{
- gic_secondary_init(0);
-}
-
static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
highbank_set_cpu_jump(cpu, secondary_startup);
@@ -67,7 +61,6 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
struct smp_operations highbank_smp_ops __initdata = {
.smp_init_cpus = highbank_smp_init_cpus,
.smp_prepare_cpus = highbank_smp_prepare_cpus,
- .smp_secondary_init = highbank_secondary_init,
.smp_boot_secondary = highbank_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = highbank_cpu_die,
@@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/smp.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/page.h>
#include <asm/smp_scu.h>
#include <asm/mach/map.h>
@@ -52,16 +51,6 @@ void imx_scu_standby_enable(void)
writel_relaxed(val, scu_base);
}
-static void __cpuinit imx_secondary_init(unsigned int cpu)
-{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-}
-
static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
imx_set_cpu_jump(cpu, v7_secondary_startup);
@@ -96,7 +85,6 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
struct smp_operations imx_smp_ops __initdata = {
.smp_init_cpus = imx_smp_init_cpus,
.smp_prepare_cpus = imx_smp_prepare_cpus,
- .smp_secondary_init = imx_secondary_init,
.smp_boot_secondary = imx_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = imx_cpu_die,
@@ -15,7 +15,6 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
@@ -42,13 +41,6 @@ static inline int get_core_count(void)
static void __cpuinit msm_secondary_init(unsigned int cpu)
{
/*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
- /*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
@@ -67,13 +67,6 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu)
4, 0, 0, 0, 0, 0);
/*
- * If any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
- /*
* Synchronise with the boot thread.
*/
spin_lock(&boot_lock);
@@ -11,7 +11,6 @@
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/smp_plat.h>
@@ -49,13 +48,6 @@ void __init sirfsoc_map_scu(void)
static void __cpuinit sirfsoc_secondary_init(unsigned int cpu)
{
/*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
- /*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
@@ -23,7 +23,6 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/emev2.h>
#include <asm/smp_plat.h>
@@ -85,11 +84,6 @@ static int __maybe_unused emev2_cpu_kill(unsigned int cpu)
}
-static void __cpuinit emev2_secondary_init(unsigned int cpu)
-{
- gic_secondary_init(0);
-}
-
static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
cpu = cpu_logical_map(cpu);
@@ -124,7 +118,6 @@ static void __init emev2_smp_init_cpus(void)
struct smp_operations emev2_smp_ops __initdata = {
.smp_init_cpus = emev2_smp_init_cpus,
.smp_prepare_cpus = emev2_smp_prepare_cpus,
- .smp_secondary_init = emev2_secondary_init,
.smp_boot_secondary = emev2_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = emev2_cpu_kill,
@@ -23,7 +23,6 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/r8a7779.h>
#include <asm/smp_plat.h>
@@ -132,11 +131,6 @@ static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu)
}
-static void __cpuinit r8a7779_secondary_init(unsigned int cpu)
-{
- gic_secondary_init(0);
-}
-
static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
struct r8a7779_pm_ch *ch = NULL;
@@ -186,7 +180,6 @@ static void __init r8a7779_smp_init_cpus(void)
struct smp_operations r8a7779_smp_ops __initdata = {
.smp_init_cpus = r8a7779_smp_init_cpus,
.smp_prepare_cpus = r8a7779_smp_prepare_cpus,
- .smp_secondary_init = r8a7779_secondary_init,
.smp_boot_secondary = r8a7779_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = r8a7779_cpu_kill,
@@ -23,7 +23,6 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
@@ -59,11 +58,6 @@ static unsigned int __init sh73a0_get_core_count(void)
return scu_get_core_count(scu_base);
}
-static void __cpuinit sh73a0_secondary_init(unsigned int cpu)
-{
- gic_secondary_init(0);
-}
-
static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
cpu = cpu_logical_map(cpu);
@@ -138,7 +132,6 @@ static void sh73a0_cpu_die(unsigned int cpu)
struct smp_operations sh73a0_smp_ops __initdata = {
.smp_init_cpus = sh73a0_smp_init_cpus,
.smp_prepare_cpus = sh73a0_smp_prepare_cpus,
- .smp_secondary_init = sh73a0_secondary_init,
.smp_boot_secondary = sh73a0_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = sh73a0_cpu_kill,
@@ -22,7 +22,6 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
@@ -33,16 +32,6 @@
extern void __iomem *sys_manager_base_addr;
extern void __iomem *rst_manager_base_addr;
-static void __cpuinit socfpga_secondary_init(unsigned int cpu)
-{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-}
-
static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
@@ -109,7 +98,6 @@ static void socfpga_cpu_die(unsigned int cpu)
struct smp_operations socfpga_smp_ops __initdata = {
.smp_init_cpus = socfpga_smp_init_cpus,
.smp_prepare_cpus = socfpga_smp_prepare_cpus,
- .smp_secondary_init = socfpga_secondary_init,
.smp_boot_secondary = socfpga_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = socfpga_cpu_die,
@@ -15,7 +15,6 @@
#include <linux/jiffies.h>
#include <linux/io.h>
#include <linux/smp.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
#include <mach/spear.h>
@@ -28,13 +27,6 @@ static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
static void __cpuinit spear13xx_secondary_init(unsigned int cpu)
{
/*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
- /*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
@@ -18,7 +18,6 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <linux/clk/tegra.h>
#include <asm/cacheflush.h>
@@ -44,13 +43,6 @@ static cpumask_t tegra_cpu_init_mask;
static void __cpuinit tegra_secondary_init(unsigned int cpu)
{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
cpumask_set_cpu(cpu, &tegra_cpu_init_mask);
}
@@ -16,7 +16,6 @@
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
@@ -58,13 +57,6 @@ static DEFINE_SPINLOCK(boot_lock);
static void __cpuinit ux500_secondary_init(unsigned int cpu)
{
/*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
- /*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
@@ -21,8 +21,6 @@
#include <linux/smp.h>
#include <linux/of.h>
-#include <linux/irqchip/arm-gic.h>
-
#include <asm/psci.h>
#include <asm/smp_plat.h>
@@ -45,14 +43,8 @@ static int __cpuinit virt_boot_secondary(unsigned int cpu,
return -ENODEV;
}
-static void __cpuinit virt_secondary_init(unsigned int cpu)
-{
- gic_secondary_init(0);
-}
-
struct smp_operations __initdata virt_smp_ops = {
.smp_init_cpus = virt_smp_init_cpus,
.smp_prepare_cpus = virt_smp_prepare_cpus,
- .smp_secondary_init = virt_secondary_init,
.smp_boot_secondary = virt_boot_secondary,
};
@@ -14,7 +14,6 @@
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/smp.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
@@ -37,13 +36,6 @@ static DEFINE_SPINLOCK(boot_lock);
void __cpuinit versatile_secondary_init(unsigned int cpu)
{
/*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
- /*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
@@ -28,6 +28,7 @@
#include <linux/module.h>
#include <linux/list.h>
#include <linux/smp.h>
+#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/cpumask.h>
#include <linux/io.h>
@@ -699,6 +700,25 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
return 0;
}
+#ifdef CONFIG_SMP
+static int __cpuinit gic_secondary_init(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_STARTING)
+ gic_cpu_init(&gic_data[0]);
+ return NOTIFY_OK;
+}
+
+/*
+ * Notifier for enabling the GIC CPU interface. Set an arbitrarily high
+ * priority because the GIC needs to be up before the ARM generic timers.
+ */
+static struct notifier_block __cpuinitdata gic_cpu_notifier = {
+ .notifier_call = gic_secondary_init,
+ .priority = 100,
+};
+#endif
+
const struct irq_domain_ops gic_irq_domain_ops = {
.map = gic_irq_domain_map,
.xlate = gic_irq_domain_xlate,
@@ -789,6 +809,7 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
#ifdef CONFIG_SMP
set_smp_cross_call(gic_raise_softirq);
+ register_cpu_notifier(&gic_cpu_notifier);
#endif
set_handle_irq(gic_handle_irq);
@@ -799,13 +820,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic_pm_init(gic);
}
-void __cpuinit gic_secondary_init(unsigned int gic_nr)
-{
- BUG_ON(gic_nr >= MAX_GIC_NR);
-
- gic_cpu_init(&gic_data[gic_nr]);
-}
-
#ifdef CONFIG_OF
static int gic_cnt __initdata = 0;
@@ -65,7 +65,6 @@ extern struct irq_chip gic_arch_extn;
void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
u32 offset, struct device_node *);
-void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
static inline void gic_init(unsigned int nr, int start,