diff mbox

ARM: mach-imx6q: Do not run error code path in success case

Message ID 1355756147-24856-1-git-send-email-fabio.estevam@freescale.com
State New
Headers show

Commit Message

Fabio Estevam Dec. 17, 2012, 2:55 p.m. UTC
The 'put_clk' path should only run in the case of failure, so provide a 'return'
to avoid it running in the success case.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/mach-imx/mach-imx6q.c |    2 ++
 1 file changed, 2 insertions(+)

Comments

Sascha Hauer Dec. 17, 2012, 8:01 p.m. UTC | #1
On Mon, Dec 17, 2012 at 12:55:47PM -0200, Fabio Estevam wrote:
> The 'put_clk' path should only run in the case of failure, so provide a 'return'
> to avoid it running in the success case.

Are you sure? It looks to me like it was intentional. The purpose of
this function is to set the parent/rate correctly. The references to
the clock are not needed later.

Sascha

> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  arch/arm/mach-imx/mach-imx6q.c |    2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> index 4eb1b3a..61f50aa 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -134,6 +134,8 @@ static void __init imx6q_sabrelite_cko1_setup(void)
>  	clk_set_parent(cko1_sel, ahb);
>  	rate = clk_round_rate(cko1, 16000000);
>  	clk_set_rate(cko1, rate);
> +
> +	return;
>  put_clk:
>  	if (!IS_ERR(cko1_sel))
>  		clk_put(cko1_sel);
> -- 
> 1.7.9.5
> 
> 
>
Fabio Estevam Dec. 17, 2012, 8:08 p.m. UTC | #2
On Mon, Dec 17, 2012 at 6:01 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:

> Are you sure? It looks to me like it was intentional. The purpose of
> this function is to set the parent/rate correctly. The references to
> the clock are not needed later.

You are right, please disregard this patch.
diff mbox

Patch

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 4eb1b3a..61f50aa 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -134,6 +134,8 @@  static void __init imx6q_sabrelite_cko1_setup(void)
 	clk_set_parent(cko1_sel, ahb);
 	rate = clk_round_rate(cko1, 16000000);
 	clk_set_rate(cko1, rate);
+
+	return;
 put_clk:
 	if (!IS_ERR(cko1_sel))
 		clk_put(cko1_sel);