new file mode 100644
@@ -0,0 +1,117 @@
+* Clock bindings for Freescale i.MX27
+
+Required properties:
+- compatible: Should be "fsl,imx27-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX27
+clocks and IDs.
+
+ Clock ID
+ -----------------------
+ dummy 0
+ ckih 1
+ ckil 2
+ mpll 3
+ spll 4
+ mpll_main2 5
+ ahb 6
+ ipg 7
+ nfc_div 8
+ per1_div 9
+ per2_div 10
+ per3_div 11
+ per4_div 12
+ vpu_sel 13
+ vpu_div 14
+ usb_div 15
+ cpu_sel 16
+ clko_sel 17
+ cpu_div 18
+ clko_div 19
+ ssi1_sel 20
+ ssi2_sel 21
+ ssi1_div 22
+ ssi2_div 23
+ clko_en 24
+ ssi2_ipg_gate 25
+ ssi1_ipg_gate 26
+ slcdc_ipg_gate 27
+ sdhc3_ipg_gate 28
+ sdhc2_ipg_gate 29
+ sdhc1_ipg_gate 30
+ scc_ipg_gate 31
+ sahara_ipg_gate 32
+ rtc_ipg_gate 33
+ pwm_ipg_gate 34
+ owire_ipg_gate 35
+ lcdc_ipg_gate 36
+ kpp_ipg_gate 37
+ iim_ipg_gate 38
+ i2c2_ipg_gate 39
+ i2c1_ipg_gate 40
+ gpt6_ipg_gate 41
+ gpt5_ipg_gate 42
+ gpt4_ipg_gate 43
+ gpt3_ipg_gate 44
+ gpt2_ipg_gate 45
+ gpt1_ipg_gate 46
+ gpio_ipg_gate 47
+ fec_ipg_gate 48
+ emma_ipg_gate 49
+ dma_ipg_gate 50
+ cspi3_ipg_gate 51
+ cspi2_ipg_gate 52
+ cspi1_ipg_gate 53
+ nfc_baud_gate 54
+ ssi2_baud_gate 55
+ ssi1_baud_gate 56
+ vpu_baud_gate 57
+ per4_gate 58
+ per3_gate 59
+ per2_gate 60
+ per1_gate 61
+ usb_ahb_gate 62
+ slcdc_ahb_gate 63
+ sahara_ahb_gate 64
+ lcdc_ahb_gate 65
+ vpu_ahb_gate 66
+ fec_ahb_gate 67
+ emma_ahb_gate 68
+ emi_ahb_gate 69
+ dma_ahb_gate 70
+ csi_ahb_gate 71
+ brom_ahb_gate 72
+ ata_ahb_gate 73
+ wdog_ipg_gate 74
+ usb_ipg_gate 75
+ uart6_ipg_gate 76
+ uart5_ipg_gate 77
+ uart4_ipg_gate 78
+ uart3_ipg_gate 79
+ uart2_ipg_gate 80
+ uart1_ipg_gate 81
+ ckih_div1p5 82
+ fpm 83
+ mpll_osc_sel 84
+ mpll_sel 85
+
+Examples:
+
+clks: ccm@10027000{
+ compatible = "fsl,imx27-ccm";
+ reg = <0x10027000 0x1000>;
+ #clock-cells = <1>;
+};
+
+uart1: serial@1000a000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks 81>, <&clks 61>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
@@ -62,12 +62,15 @@
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
reg = <0x10002000 0x4000>;
interrupts = <27>;
+ clocks = <&clks 0>;
};
uart1: serial@1000a000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
interrupts = <20>;
+ clocks = <&clks 81>, <&clks 61>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -75,6 +78,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000b000 0x1000>;
interrupts = <19>;
+ clocks = <&clks 80>, <&clks 61>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -82,6 +87,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000c000 0x1000>;
interrupts = <18>;
+ clocks = <&clks 79>, <&clks 61>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -89,6 +96,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000d000 0x1000>;
interrupts = <17>;
+ clocks = <&clks 78>, <&clks 61>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -98,6 +107,8 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000e000 0x1000>;
interrupts = <16>;
+ clocks = <&clks 53>, <&clks 0>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -107,6 +118,8 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000f000 0x1000>;
interrupts = <15>;
+ clocks = <&clks 52>, <&clks 0>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -116,6 +129,7 @@
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x10012000 0x1000>;
interrupts = <12>;
+ clocks = <&clks 40>;
status = "disabled";
};
@@ -185,6 +199,8 @@
compatible = "fsl,imx27-cspi";
reg = <0x10017000 0x1000>;
interrupts = <6>;
+ clocks = <&clks 51>, <&clks 0>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -192,6 +208,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001b000 0x1000>;
interrupts = <49>;
+ clocks = <&clks 77>, <&clks 61>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -199,6 +217,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001c000 0x1000>;
interrupts = <48>;
+ clocks = <&clks 78>, <&clks 61>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -208,6 +228,7 @@
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x1001d000 0x1000>;
interrupts = <1>;
+ clocks = <&clks 39>;
status = "disabled";
};
@@ -215,10 +236,19 @@
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>;
interrupts = <50>;
+ clocks = <&clks 48>, <&clks 67>, <&clks 0>;
+ clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
+
+ clks: ccm@10027000{
+ compatible = "fsl,imx27-ccm";
+ reg = <0x10027000 0x1000>;
+ #clock-cells = <1>;
+ };
};
+
nfc: nand@d8000000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -226,6 +256,7 @@
compatible = "fsl,imx27-nand";
reg = <0xd8000000 0x1000>;
interrupts = <29>;
+ clocks = <&clks 54>;
status = "disabled";
};
};
@@ -86,10 +86,12 @@ enum mx27_clks {
};
static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
int __init mx27_clocks_init(unsigned long fref)
{
int i;
+ struct device_node *np;
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[ckih] = imx_clk_fixed("ckih", fref);
@@ -197,6 +199,13 @@ int __init mx27_clocks_init(unsigned long fref)
pr_err("i.MX27 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
+ if (np) {
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ }
+
clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0");
clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
@@ -18,25 +18,9 @@
#include "common.h"
#include "mx27.h"
-static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL),
- OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL),
- OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
- OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL),
- OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL),
- OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "imx27-nand.0", NULL),
- { /* sentinel */ }
-};
-
static void __init imx27_dt_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- imx27_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static void __init imx27_timer_init(void)