new file mode 100644
@@ -0,0 +1,91 @@
+* Clock bindings for Freescale i.MX31
+
+Required properties:
+- compatible: Should be "fsl,imx31-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX31
+clocks and IDs.
+
+ Clock ID
+ -----------------------
+ dummy 0
+ ckih 1
+ ckil 2
+ mpll 3
+ spll 4
+ upll 5
+ mcu_main 6
+ hsp 7
+ ahb 8
+ nfc 9
+ ipg 10
+ per_div 11
+ per 12
+ csi_sel 13
+ fir_sel 14
+ csi_div 15
+ usb_div_pre 16
+ usb_div_post 17
+ fir_div_pre 18
+ fir_div_post 19
+ sdhc1_gate 20
+ sdhc2_gate 21
+ gpt_gate 22
+ epit1_gate 23
+ epit2_gate 24
+ iim_gate 25
+ ata_gate 26
+ sdma_gate 27
+ cspi3_gate 28
+ rng_gate 29
+ uart1_gate 30
+ uart2_gate 31
+ ssi1_gate 32
+ i2c1_gate 33
+ i2c2_gate 34
+ i2c3_gate 35
+ hantro_gate 36
+ mstick1_gate 37
+ mstick2_gate 38
+ csi_gate 39
+ rtc_gate 40
+ wdog_gate 41
+ pwm_gate 42
+ sim_gate 43
+ ect_gate 44
+ usb_gate 45
+ kpp_gate 46
+ ipu_gate 47
+ uart3_gate 48
+ uart4_gate 49
+ uart5_gate 50
+ owire_gate 51
+ ssi2_gate 52
+ cspi1_gate 53
+ cspi2_gate 54
+ gacc_gate 55
+ emi_gate 56
+ rtic_gate 57
+ firi_gate 58
+
+Examples:
+
+clks: ccm@53f80000{
+ compatible = "fsl,imx31-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <0 31 0x04 0 53 0x04>;
+ #clock-cells = <1>;
+};
+
+uart1: serial@43f90000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 10>, <&clks 30>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
@@ -45,6 +45,8 @@
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43f90000 0x4000>;
interrupts = <45>;
+ clocks = <&clks 10>, <&clks 30>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -52,12 +54,16 @@
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43f94000 0x4000>;
interrupts = <32>;
+ clocks = <&clks 10>, <&clks 31>;
+ clock-names = "ipg", "per";
status = "disabled";
};
uart4: serial@43fb0000 {
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43fb0000 0x4000>;
+ clocks = <&clks 10>, <&clks 49>;
+ clock-names = "ipg", "per";
interrupts = <46>;
status = "disabled";
};
@@ -66,6 +72,8 @@
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43fb4000 0x4000>;
interrupts = <47>;
+ clocks = <&clks 10>, <&clks 50>;
+ clock-names = "ipg", "per";
status = "disabled";
};
};
@@ -81,8 +89,17 @@
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <18>;
+ clocks = <&clks 10>, <&clks 48>;
+ clock-names = "ipg", "per";
status = "disabled";
};
+
+ clks: ccm@53f80000{
+ compatible = "fsl,imx31-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <0 31 0x04 0 53 0x04>;
+ #clock-cells = <1>;
+ };
};
};
};
@@ -46,11 +46,13 @@ enum mx31_clks {
};
static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
int __init mx31_clocks_init(unsigned long fref)
{
void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
int i;
+ struct device_node *np;
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[ckih] = imx_clk_fixed("ckih", fref);
@@ -117,6 +119,14 @@ int __init mx31_clocks_init(unsigned long fref)
pr_err("imx31 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
+
+ if (np) {
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ }
+
clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");
@@ -18,24 +18,9 @@
#include "common.h"
#include "mx31.h"
-static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
- "imx21-uart.0", NULL),
- OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR,
- "imx21-uart.1", NULL),
- OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR,
- "imx21-uart.2", NULL),
- OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR,
- "imx21-uart.3", NULL),
- OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR,
- "imx21-uart.4", NULL),
- { /* sentinel */ }
-};
-
static void __init imx31_dt_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- imx31_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static void __init imx31_timer_init(void)
Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- .../devicetree/bindings/clock/imx31-clock.txt | 91 ++++++++++++++++++++ arch/arm/boot/dts/imx31.dtsi | 17 ++++ arch/arm/mach-imx/clk-imx31.c | 10 +++ arch/arm/mach-imx/imx31-dt.c | 17 +--- 4 files changed, 119 insertions(+), 16 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.txt