@@ -21,7 +21,7 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
-#include <mach/hardware.h>
+#include "hardware.h"
/* LAN9217 ethernet base address */
#define LAN9217_BASE_ADDR(n) (n + 0x0)
@@ -24,10 +24,10 @@
#include <linux/of.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
#include "common.h"
+#include "hardware.h"
#include "irq-common.h"
#define AVIC_INTCNTL 0x00 /* int control reg */
@@ -22,10 +22,9 @@
#include <linux/clkdev.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-
#include "clk.h"
#include "common.h"
+#include "hardware.h"
/* CCM register addresses */
#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
@@ -25,10 +25,9 @@
#include <linux/module.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-
#include "clk.h"
#include "common.h"
+#include "hardware.h"
#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
@@ -24,11 +24,10 @@
#include <linux/clkdev.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-#include <mach/mx25.h>
-
#include "clk.h"
#include "common.h"
+#include "hardware.h"
+#include "mx25.h"
#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
@@ -6,10 +6,9 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
-#include <mach/hardware.h>
-
#include "clk.h"
#include "common.h"
+#include "hardware.h"
#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
@@ -22,12 +22,11 @@
#include <linux/err.h>
#include <linux/of.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-
#include "clk.h"
#include "common.h"
#include "crmregs-imx3.h"
+#include "hardware.h"
+#include "mx31.h"
static const char *mcu_main_sel[] = { "spll", "mpll", };
static const char *per_sel[] = { "per_div", "ipg", };
@@ -14,11 +14,10 @@
#include <linux/of.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-
#include "crmregs-imx3.h"
#include "clk.h"
#include "common.h"
+#include "hardware.h"
struct arm_ahb_div {
unsigned char arm, ahb, sel;
@@ -14,11 +14,10 @@
#include <linux/of.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-
#include "crm-regs-imx5.h"
#include "clk.h"
#include "common.h"
+#include "hardware.h"
/* Low-power Audio Playback Mode clock */
static const char *lp_apm_sel[] = { "osc", };
@@ -4,10 +4,10 @@
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/err.h>
-#include <mach/hardware.h>
#include "clk.h"
#include "common.h"
+#include "hardware.h"
/**
* pll v1
@@ -11,9 +11,9 @@
*/
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include "iim.h"
+#include "hardware.h"
static int mx25_cpu_rev = -1;
@@ -24,7 +24,7 @@
#include <linux/io.h>
#include <linux/module.h>
-#include <mach/hardware.h>
+#include "hardware.h"
static int mx27_cpu_rev = -1;
static int mx27_cpu_partnumber;
@@ -11,9 +11,9 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include "common.h"
+#include "hardware.h"
#include "iim.h"
static int mx31_cpu_rev = -1;
@@ -10,8 +10,8 @@
*/
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+#include "hardware.h"
#include "iim.h"
static int mx35_cpu_rev = -1;
@@ -15,9 +15,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <mach/hardware.h>
#include <linux/io.h>
+#include "hardware.h"
+
static int mx5_cpu_rev = -1;
#define IIM_SREV 0x24
@@ -1,7 +1,8 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
unsigned int __mxc_cpu_type;
EXPORT_SYMBOL(__mxc_cpu_type);
@@ -13,9 +13,10 @@
#include <linux/bug.h>
#include <linux/types.h>
-#include <mach/hardware.h>
#include <linux/kernel.h>
+#include "hardware.h"
+
static struct cpu_op mx51_cpu_op[] = {
{
.cpu_rate = 160000000,},
@@ -22,7 +22,8 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
#define CLK32_FREQ 32768
#define NANOSECOND (1000 * 1000 * 1000)
@@ -24,7 +24,8 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_ahci_imx_data_entry_single(soc, _devid) \
@@ -8,7 +8,8 @@
*/
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_fec_data_entry_single(soc, _devid) \
@@ -5,7 +5,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \
@@ -7,7 +7,8 @@
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_fsl_usb2_udc_data_entry_single(soc) \
@@ -16,7 +16,8 @@
* Boston, MA 02110-1301, USA.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
struct platform_device *__init imx_add_gpio_keys(
@@ -7,7 +7,8 @@
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_fb_data_entry_single(soc, _devid, _size) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_keypad_data_entry_single(soc, _size) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \
@@ -7,7 +7,8 @@
* Free Software Foundation.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_imx21_hcd_data_entry_single(soc) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_udc_data_entry_single(soc, _size) \
@@ -7,7 +7,8 @@
* Free Software Foundation.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_imxdi_rtc_data_entry_single(soc) \
@@ -7,7 +7,8 @@
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_ipu_core_entry_single(soc) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_mx2_camera_data_entry_single(soc, _devid) \
@@ -7,7 +7,8 @@
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \
@@ -7,7 +7,8 @@
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \
@@ -7,7 +7,8 @@
* Free Software Foundation.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
struct imx_mxc_rnga_data {
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_rtc_data_entry_single(soc, _devid) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_w1_data_entry_single(soc) \
@@ -3,7 +3,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_pata_imx_data_entry_single(soc, _size) \
@@ -6,8 +6,9 @@
* Free Software Foundation.
*/
-#include <mach/hardware.h>
#include <linux/platform_data/mmc-esdhc-imx.h>
+
+#include "../hardware.h"
#include "devices-common.h"
#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
+#include "../hardware.h"
#include "devices-common.h"
#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX25_OTG_SIC_SHIFT 29
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX27_OTG_SIC_SHIFT 29
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX31_OTG_SIC_SHIFT 29
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX35_OTG_SIC_SHIFT 29
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define MXC_OTG_OFFSET 0
#define MXC_H1_OFFSET 0x200
#define MXC_H2_OFFSET 0x400
@@ -51,11 +51,10 @@
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/err.h>
-
-#include <mach/hardware.h>
#include <asm/mach/time.h>
#include "common.h"
+#include "hardware.h"
static struct clock_event_device clockevent_epit;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
@@ -29,10 +29,9 @@
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
#include "iomux-mx27.h"
static const int eukrea_mbimx27_pins[] __initconst = {
@@ -26,14 +26,14 @@
#include <linux/spi/spi.h>
#include <video/platform_lcd.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mx25.h>
#include "common.h"
#include "devices-imx25.h"
+#include "hardware.h"
#include "iomux-mx25.h"
+#include "mx25.h"
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LCD */
@@ -36,10 +36,9 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
#include "iomux-mx35.h"
static const struct fb_videomode fb_modedb[] = {
@@ -36,10 +36,9 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx51.h"
+#include "hardware.h"
#include "iomux-mx51.h"
static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
similarity index 94%
rename from arch/arm/mach-imx/include/mach/hardware.h
rename to arch/arm/mach-imx/hardware.h
@@ -105,20 +105,20 @@
#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x))
-#include <mach/mxc.h>
+#include "mxc.h"
-#include <mach/mx6q.h>
-#include <mach/mx50.h>
-#include <mach/mx51.h>
-#include <mach/mx53.h>
-#include <mach/mx3x.h>
-#include <mach/mx31.h>
-#include <mach/mx35.h>
-#include <mach/mx2x.h>
-#include <mach/mx21.h>
-#include <mach/mx27.h>
-#include <mach/mx1.h>
-#include <mach/mx25.h>
+#include "mx6q.h"
+#include "mx50.h"
+#include "mx51.h"
+#include "mx53.h"
+#include "mx3x.h"
+#include "mx31.h"
+#include "mx35.h"
+#include "mx2x.h"
+#include "mx21.h"
+#include "mx27.h"
+#include "mx1.h"
+#include "mx25.h"
#define imx_map_entry(soc, name, _type) { \
.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
@@ -14,9 +14,9 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/mx27.h>
#include "common.h"
+#include "mx27.h"
static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL),
@@ -14,9 +14,9 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/mx31.h>
#include "common.h"
+#include "mx31.h"
static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
@@ -15,9 +15,9 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/mx51.h>
#include "common.h"
+#include "mx51.h"
/*
* Lookup table for attaching a specific name and platform_data pointer to
@@ -22,8 +22,8 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <mach/hardware.h>
+#include "hardware.h"
#include "iomux-mx3.h"
/*
@@ -28,9 +28,9 @@
#include <linux/string.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
+#include "hardware.h"
#include "iomux-v1.h"
static void __iomem *imx_iomuxv1_baseaddr;
@@ -25,9 +25,9 @@
#include <linux/string.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
+#include "hardware.h"
#include "iomux-v3.h"
static void __iomem *base;
@@ -14,7 +14,8 @@
#include <asm/page.h>
#include <asm/sizes.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
static struct map_desc imx_lluart_desc = {
#ifdef CONFIG_DEBUG_IMX6Q_UART2
@@ -25,10 +25,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx1.h"
+#include "hardware.h"
#include "iomux-mx1.h"
static const int apf9328_pins[] __initconst = {
@@ -41,7 +41,6 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -51,6 +50,7 @@
#include "common.h"
#include "devices-imx31.h"
#include "crmregs-imx3.h"
+#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -19,14 +19,13 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-
#include <asm/mach/time.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -34,11 +34,10 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx27.h"
#include "eukrea-baseboards.h"
+#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
@@ -37,11 +37,10 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx35.h"
#include "eukrea-baseboards.h"
+#include "hardware.h"
#include "iomux-mx35.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -26,8 +26,6 @@
#include <linux/spi/spi.h>
#include <linux/can/platform/mcp251x.h>
-#include <mach/hardware.h>
-
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -37,6 +35,7 @@
#include "devices-imx51.h"
#include "cpu_op-mx51.h"
#include "eukrea-baseboards.h"
+#include "hardware.h"
#include "iomux-mx51.h"
#define USBH1_RST IMX_GPIO_NR(2, 28)
@@ -27,18 +27,18 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/mx25.h>
#include "common.h"
#include "devices-imx25.h"
#include "eukrea-baseboards.h"
+#include "hardware.h"
#include "iomux-mx25.h"
+#include "mx25.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
@@ -40,10 +40,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/system_info.h>
-#include <mach/hardware.h>
#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
#include "iomux-mx27.h"
#define TVP5150_RSTN (GPIO_PORTC + 18)
@@ -17,8 +17,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
+#include "hardware.h"
#include "common.h"
#include "devices-imx27.h"
#include "iomux-mx27.h"
@@ -20,10 +20,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
#include "iomux-mx27.h"
static const int mx27lite_pins[] __initconst = {
@@ -19,9 +19,9 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/mx53.h>
#include "common.h"
+#include "mx53.h"
/*
* Lookup table for attaching a specific name and platform_data pointer to
@@ -32,10 +32,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/system_misc.h>
-#include <mach/hardware.h>
#include "common.h"
#include "cpuidle.h"
+#include "hardware.h"
void imx6q_restart(char mode, const char *cmd)
{
@@ -36,10 +36,9 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \
@@ -23,10 +23,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx1.h"
+#include "hardware.h"
#include "iomux-mx1.h"
static const int mx1ads_pins[] __initconst = {
@@ -18,7 +18,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -26,6 +25,7 @@
#include "common.h"
#include "devices-imx21.h"
+#include "hardware.h"
#include "iomux-mx21.h"
/*
@@ -31,17 +31,17 @@
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/mx25.h>
#include "common.h"
#include "devices-imx25.h"
+#include "hardware.h"
#include "iomux-mx25.h"
+#include "mx25.h"
#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6)
@@ -36,11 +36,11 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
@@ -21,7 +21,6 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/irq.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -29,6 +28,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
#include "iomux-mx27.h"
/*
@@ -30,7 +30,6 @@
#include <media/soc_camera.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -41,6 +40,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -28,7 +28,6 @@
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
#include <linux/mfd/wm8350/audio.h>
@@ -38,6 +37,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
/* Base address of PBC controller */
@@ -42,11 +42,10 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "board-mx31lilly.h"
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -39,11 +39,10 @@
#include <asm/page.h>
#include <asm/setup.h>
-#include <mach/hardware.h>
-
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -42,12 +42,12 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/hardware.h>
#include <linux/platform_data/asoc-imx-ssi.h>
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -43,7 +43,6 @@
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/hardware.h>
#include <video/platform_lcd.h>
#include <media/soc_camera.h>
@@ -51,6 +50,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
#include "iomux-mx35.h"
#define GPIO_MC9S08DZ60_GPS_ENABLE 0
@@ -24,8 +24,6 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -34,6 +32,7 @@
#include "common.h"
#include "devices-imx50.h"
+#include "hardware.h"
#include "iomux-mx50.h"
#define FEC_EN IMX_GPIO_NR(6, 23)
@@ -19,11 +19,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx51.h"
+#include "hardware.h"
#include "iomux-mx51.h"
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
@@ -20,8 +20,6 @@
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
-#include <mach/hardware.h>
-
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -30,6 +28,7 @@
#include "common.h"
#include "devices-imx51.h"
#include "cpu_op-mx51.h"
+#include "hardware.h"
#include "iomux-mx51.h"
#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
@@ -21,7 +21,6 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/irq.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -31,6 +30,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
#include "iomux-mx27.h"
static const int mxt_td60_pins[] __initconst = {
@@ -32,11 +32,11 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/mach/time.h>
#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
@@ -42,10 +42,10 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/hardware.h>
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
#include "pcm037.h"
#include "ulpi.h"
@@ -33,11 +33,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-
#include "board-pcm038.h"
#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
@@ -33,10 +33,9 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
#include "iomux-mx35.h"
#include "ulpi.h"
@@ -21,7 +21,6 @@
#include <linux/mtd/nand.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -31,6 +30,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
/* FPGA defines */
@@ -20,10 +20,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx1.h"
+#include "hardware.h"
#include "iomux-mx1.h"
/*
@@ -28,14 +28,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/mfd/mc13xxx.h>
#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
#include "iomux-mx35.h"
#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
@@ -22,10 +22,9 @@
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices/devices-common.h"
+#include "hardware.h"
#include "iomux-v1.h"
static struct map_desc imx_io_desc[] __initdata = {
@@ -21,12 +21,12 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/pinctrl/machine.h>
-#include <mach/hardware.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices/devices-common.h"
+#include "hardware.h"
#include "iomux-v1.h"
/* MX21 memory map definition */
@@ -24,12 +24,11 @@
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/mx25.h>
-
#include "common.h"
#include "devices/devices-common.h"
+#include "hardware.h"
#include "iomux-v3.h"
+#include "mx25.h"
/*
* This table defines static virtual address mappings for I/O regions.
@@ -21,12 +21,12 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/pinctrl/machine.h>
-#include <mach/hardware.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices/devices-common.h"
+#include "hardware.h"
#include "iomux-v1.h"
/* MX27 memory map definition */
@@ -26,11 +26,10 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "crmregs-imx3.h"
#include "devices/devices-common.h"
+#include "hardware.h"
#include "iomux-v3.h"
void __iomem *mx3_ccm_base;
@@ -18,10 +18,9 @@
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices/devices-common.h"
+#include "hardware.h"
#include "iomux-v3.h"
/*
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx1.h
rename to arch/arm/mach-imx/mx1.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx21.h
rename to arch/arm/mach-imx/mx21.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx25.h
rename to arch/arm/mach-imx/mx25.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx27.h
rename to arch/arm/mach-imx/mx27.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx2x.h
rename to arch/arm/mach-imx/mx2x.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx31.h
rename to arch/arm/mach-imx/mx31.h
@@ -30,11 +30,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "board-mx31lilly.h"
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
/*
@@ -31,11 +31,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
/*
@@ -22,10 +22,9 @@
#include <linux/usb/otg.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -24,12 +24,11 @@
#include <linux/usb/otg.h>
-#include <mach/hardware.h>
-
#include <media/soc_camera.h>
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -23,13 +23,12 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <mach/hardware.h>
-
#include <media/soc_camera.h>
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx35.h
rename to arch/arm/mach-imx/mx35.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx3x.h
rename to arch/arm/mach-imx/mx3x.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx50.h
rename to arch/arm/mach-imx/mx50.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx51.h
rename to arch/arm/mach-imx/mx51.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx53.h
rename to arch/arm/mach-imx/mx53.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mx6q.h
rename to arch/arm/mach-imx/mx6q.h
similarity index 100%
rename from arch/arm/mach-imx/include/mach/mxc.h
rename to arch/arm/mach-imx/mxc.h
@@ -23,10 +23,9 @@
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-
#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
#include "iomux-mx27.h"
static const int pcm970_pins[] __initconst = {
@@ -16,9 +16,9 @@
#include <asm/smp_scu.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
#include "common.h"
+#include "hardware.h"
static void __iomem *scu_base;
@@ -10,7 +10,8 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
static int mx27_suspend_enter(suspend_state_t state)
{
@@ -9,11 +9,11 @@
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/io.h>
-#include <mach/hardware.h>
#include "common.h"
#include "crmregs-imx3.h"
#include "devices/devices-common.h"
+#include "hardware.h"
/*
* Set cpu low power mode before WFI instruction. This function is called
@@ -16,11 +16,11 @@
#include <asm/cacheflush.h>
#include <asm/system_misc.h>
#include <asm/tlbflush.h>
-#include <mach/hardware.h>
#include "common.h"
#include "cpuidle.h"
#include "crm-regs-imx5.h"
+#include "hardware.h"
/*
* The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
@@ -18,9 +18,9 @@
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/hardware.h>
#include "common.h"
+#include "hardware.h"
extern unsigned long phys_l2x0_saved_regs;
@@ -22,12 +22,12 @@
#include <linux/err.h>
#include <linux/delay.h>
-#include <mach/hardware.h>
#include <asm/system_misc.h>
#include <asm/proc-fns.h>
#include <asm/mach-types.h>
#include "common.h"
+#include "hardware.h"
static void __iomem *wdog_base;
@@ -27,11 +27,11 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <mach/hardware.h>
#include <asm/sched_clock.h>
#include <asm/mach/time.h>
#include "common.h"
+#include "hardware.h"
/*
* There are 2 versions of the timer hardware on Freescale MXC hardware.
@@ -21,10 +21,10 @@
#include <asm/mach/irq.h>
#include <asm/exception.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
#include "common.h"
+#include "hardware.h"
#include "irq-common.h"
/*