| Message ID | 1348104718-21751-1-git-send-email-swarren@wwwdotorg.org |
|---|---|
| State | New |
| Headers | show |
On Wed, Sep 19, 2012 at 07:31:58PM -0600, Stephen Warren wrote: > The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic > support for this SoC; enough to boot the system into an initrd with > UART console, interrupt controller, timers, and a stub clock driver. > > Also provided is a similarly basic device tree for the Raspberry Pi > Model B board. > > This series was written by Simon Arlott, Chris Boot, and Dom Cobley > downstream, with reference to a Broadcom tree, and modified for upstream > and submitted by Stephen Warren. > > ---------------------------------------------------------------- > > The following changes since commit 55d512e245bc7699a8800e23df1a24195dd08217: > > Linux 3.6-rc5 > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git rpi-for-3.7 Nice! I'm going to guess that you meant linux-rpi.git here since that's where I found a tag with the commit you're referencing in the pull request at the head. :) Pulled into bcm2835/soc and next/soc. Thanks! -Olof
On 09/20/2012 06:28 PM, Olof Johansson wrote: > On Wed, Sep 19, 2012 at 07:31:58PM -0600, Stephen Warren wrote: >> The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic >> support for this SoC; enough to boot the system into an initrd with >> UART console, interrupt controller, timers, and a stub clock driver. >> >> Also provided is a similarly basic device tree for the Raspberry Pi >> Model B board. >> >> This series was written by Simon Arlott, Chris Boot, and Dom Cobley >> downstream, with reference to a Broadcom tree, and modified for upstream >> and submitted by Stephen Warren. >> >> ---------------------------------------------------------------- >> >> The following changes since commit 55d512e245bc7699a8800e23df1a24195dd08217: >> >> Linux 3.6-rc5 >> >> are available in the git repository at: >> >> git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git rpi-for-3.7 > > Nice! > > I'm going to guess that you meant linux-rpi.git here since that's where I found > a tag with the commit you're referencing in the pull request at the head. :) Oops, and I even went to the trouble of editing my pull request script to make that a parameter..., which I evidently forgot to pass.
The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic support for this SoC; enough to boot the system into an initrd with UART console, interrupt controller, timers, and a stub clock driver. Also provided is a similarly basic device tree for the Raspberry Pi Model B board. This series was written by Simon Arlott, Chris Boot, and Dom Cobley downstream, with reference to a Broadcom tree, and modified for upstream and submitted by Stephen Warren. ---------------------------------------------------------------- The following changes since commit 55d512e245bc7699a8800e23df1a24195dd08217: Linux 3.6-rc5 are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git rpi-for-3.7 for you to fetch changes up to f680f25c635a1a4327bef34fcbe1e9e3777b546c: MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ---------------------------------------------------------------- Simon Arlott (5): ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: bcm2835: add interrupt controller driver ARM: bcm2835: add system timer ARM: bcm2835: add stub clock driver ARM: bcm2835: instantiate console UART Stephen Warren (1): MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture Documentation/devicetree/bindings/arm/bcm2835.txt | 8 + .../brcm,bcm2835-armctrl-ic.txt | 110 +++++++ .../bindings/timer/brcm,bcm2835-system-timer.txt | 22 ++ .../devicetree/bindings/vendor-prefixes.txt | 1 + MAINTAINERS | 10 + arch/arm/Kconfig | 17 ++ arch/arm/Makefile | 1 + arch/arm/boot/dts/bcm2835-rpi-b.dts | 12 + arch/arm/boot/dts/bcm2835.dtsi | 39 +++ arch/arm/configs/bcm2835_defconfig | 95 ++++++ arch/arm/mach-bcm2835/Makefile | 1 + arch/arm/mach-bcm2835/Makefile.boot | 5 + arch/arm/mach-bcm2835/bcm2835.c | 64 +++++ arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h | 29 ++ arch/arm/mach-bcm2835/include/mach/debug-macro.S | 21 ++ arch/arm/mach-bcm2835/include/mach/timex.h | 26 ++ arch/arm/mach-bcm2835/include/mach/uncompress.h | 45 +++ drivers/Kconfig | 2 + drivers/Makefile | 2 + drivers/clk/Makefile | 1 + drivers/clk/clk-bcm2835.c | 59 ++++ drivers/clocksource/Makefile | 1 + drivers/clocksource/bcm2835_timer.c | 161 +++++++++++ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-bcm2835.c | 223 +++++++++++++++ include/linux/bcm2835_timer.h | 22 ++ include/linux/clk/bcm2835.h | 24 ++ include/linux/irqchip/bcm2835.h | 29 ++ 28 files changed, 1031 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm2835.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt create mode 100644 Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt create mode 100644 arch/arm/boot/dts/bcm2835-rpi-b.dts create mode 100644 arch/arm/boot/dts/bcm2835.dtsi create mode 100644 arch/arm/configs/bcm2835_defconfig create mode 100644 arch/arm/mach-bcm2835/Makefile create mode 100644 arch/arm/mach-bcm2835/Makefile.boot create mode 100644 arch/arm/mach-bcm2835/bcm2835.c create mode 100644 arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h create mode 100644 arch/arm/mach-bcm2835/include/mach/debug-macro.S create mode 100644 arch/arm/mach-bcm2835/include/mach/timex.h create mode 100644 arch/arm/mach-bcm2835/include/mach/uncompress.h create mode 100644 drivers/clk/clk-bcm2835.c create mode 100644 drivers/clocksource/bcm2835_timer.c create mode 100644 drivers/irqchip/Kconfig create mode 100644 drivers/irqchip/Makefile create mode 100644 drivers/irqchip/irq-bcm2835.c create mode 100644 include/linux/bcm2835_timer.h create mode 100644 include/linux/clk/bcm2835.h create mode 100644 include/linux/irqchip/bcm2835.h