new file mode 100644
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ };
+
+ avic: avic-interrupt-controller@60000000 {
+ compatible = "fsl,imx31-avic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x60000000 0x100000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&avic>;
+ ranges;
+
+ aips@43f00000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x43f00000 0x100000>;
+ ranges;
+
+ uart1: serial@43f90000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ status = "disabled";
+ };
+
+ uart2: serial@43f94000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f94000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ uart4: serial@43fb0000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43fb0000 0x4000>;
+ interrupts = <46>;
+ status = "disabled";
+ };
+
+ uart5: serial@43fb4000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43fb4000 0x4000>;
+ interrupts = <47>;
+ status = "disabled";
+ };
+ };
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x100000>;
+ ranges;
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+ };
+ };
+};
@@ -558,6 +558,14 @@ config MACH_BUG
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
+config MACH_IMX31_DT
+ bool "Support i.MX31 platforms from device tree"
+ select SOC_IMX31
+ select USE_OF
+ help
+ Include support for Freescale i.MX31 based platforms
+ using the device tree for discovery.
+
comment "MX35 platforms:"
config MACH_PCM043
@@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_QONG) += mach-qong.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
obj-$(CONFIG_MACH_BUG) += mach-bug.o
+obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
@@ -20,6 +20,7 @@
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/mx31.h>
@@ -179,3 +180,21 @@ int __init mx31_clocks_init(unsigned long fref)
return 0;
}
+
+#ifdef CONFIG_OF
+int __init mx31_clocks_init_dt(void)
+{
+ struct device_node *np;
+ u32 fref = 26000000; /* default */
+
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ continue;
+
+ if (!of_property_read_u32(np, "clock-frequency", &fref))
+ break;
+ }
+
+ return mx31_clocks_init(fref);
+}
+#endif
new file mode 100644
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx31.h>
+
+static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
+ "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR,
+ "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR,
+ "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR,
+ "imx21-uart.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR,
+ "imx21-uart.4", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx31_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx31_auxdata_lookup, NULL);
+}
+
+static void __init imx31_timer_init(void)
+{
+ mx31_clocks_init_dt();
+}
+
+static struct sys_timer imx31_timer = {
+ .init = imx31_timer_init,
+};
+
+static const char *imx31_dt_board_compat[] __initdata = {
+ "fsl,imx31",
+ NULL
+};
+
+DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
+ .timer = &imx31_timer,
+ .init_machine = imx31_dt_init,
+ .dt_compat = imx31_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
@@ -68,6 +68,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
extern int mx27_clocks_init_dt(void);
+extern int mx31_clocks_init_dt(void);
extern int mx51_clocks_init_dt(void);
extern int mx53_clocks_init_dt(void);
extern int mx6q_clocks_init(void);
This patch adds basic devicetree support for i.MX31 based SoCs. Only the UART and interrupts bindings are added. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> --- arch/arm/boot/dts/imx31.dtsi | 88 +++++++++++++++++++++++++++++++ arch/arm/mach-imx/Kconfig | 8 +++ arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/clk-imx31.c | 19 +++++++ arch/arm/mach-imx/imx31-dt.c | 63 ++++++++++++++++++++++ arch/arm/plat-mxc/include/mach/common.h | 1 + 6 files changed, 180 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/imx31.dtsi create mode 100644 arch/arm/mach-imx/imx31-dt.c