Message ID | 1330517853-30870-1-git-send-email-javier.martin@vista-silicon.com |
---|---|
State | New |
Headers | show |
On Wed, Feb 29, 2012 at 01:17:33PM +0100, Javier Martin wrote: > Vista Silicon Visstrim_m10 board has 4 > leds to signal several working conditions. > > Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Applied, thanks Sascha > --- > This patch has to be applied on top of the following series: > [PATCH 0/4] i.MX27: visstrim_m10: Add several peripherals. > > --- > arch/arm/mach-imx/Kconfig | 1 + > arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 31 +++++++++++++++++++++++++++ > 2 files changed, 32 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 8102e7f..a3125ac 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -323,6 +323,7 @@ config MACH_IMX27_VISSTRIM_M10 > select IMX_HAVE_PLATFORM_MX2_CAMERA > select IMX_HAVE_PLATFORM_MXC_EHCI > select IMX_HAVE_PLATFORM_MXC_MMC > + select LEDS_GPIO_REGISTER > help > Include support for Visstrim_m10 platform and its different variants. > This includes specific configurations for the board and its > diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c > index 7208a9e..0a1643c 100644 > --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c > +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c > @@ -31,6 +31,7 @@ > #include <linux/gpio.h> > #include <linux/delay.h> > #include <linux/dma-mapping.h> > +#include <linux/leds.h> > #include <linux/memblock.h> > #include <media/soc_camera.h> > #include <sound/tlv320aic32x4.h> > @@ -232,6 +233,35 @@ static const struct gpio_keys_platform_data > .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), > }; > > +/* led */ > +static const struct gpio_led visstrim_m10_leds[] __initconst = { > + { > + .name = "visstrim:ld0", > + .default_trigger = "nand-disk", > + .gpio = (GPIO_PORTC + 29), > + }, > + { > + .name = "visstrim:ld1", > + .default_trigger = "nand-disk", > + .gpio = (GPIO_PORTC + 24), > + }, > + { > + .name = "visstrim:ld2", > + .default_trigger = "nand-disk", > + .gpio = (GPIO_PORTC + 28), > + }, > + { > + .name = "visstrim:ld3", > + .default_trigger = "nand-disk", > + .gpio = (GPIO_PORTC + 25), > + }, > +}; > + > +static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = { > + .leds = visstrim_m10_leds, > + .num_leds = ARRAY_SIZE(visstrim_m10_leds), > +}; > + > /* Visstrim_SM10 has a microSD slot connected to sdhc1 */ > static int visstrim_m10_sdhc1_init(struct device *dev, > irq_handler_t detect_irq, void *data) > @@ -365,6 +395,7 @@ static void __init visstrim_m10_board_init(void) > platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); > platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, > &iclink_tvp5150, sizeof(iclink_tvp5150)); > + gpio_led_register_device(0, &visstrim_m10_led_data); > visstrim_camera_init(); > } > > -- > 1.7.0.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 8102e7f..a3125ac 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -323,6 +323,7 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC + select LEDS_GPIO_REGISTER help Include support for Visstrim_m10 platform and its different variants. This includes specific configurations for the board and its diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 7208a9e..0a1643c 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -31,6 +31,7 @@ #include <linux/gpio.h> #include <linux/delay.h> #include <linux/dma-mapping.h> +#include <linux/leds.h> #include <linux/memblock.h> #include <media/soc_camera.h> #include <sound/tlv320aic32x4.h> @@ -232,6 +233,35 @@ static const struct gpio_keys_platform_data .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), }; +/* led */ +static const struct gpio_led visstrim_m10_leds[] __initconst = { + { + .name = "visstrim:ld0", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 29), + }, + { + .name = "visstrim:ld1", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 24), + }, + { + .name = "visstrim:ld2", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 28), + }, + { + .name = "visstrim:ld3", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 25), + }, +}; + +static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = { + .leds = visstrim_m10_leds, + .num_leds = ARRAY_SIZE(visstrim_m10_leds), +}; + /* Visstrim_SM10 has a microSD slot connected to sdhc1 */ static int visstrim_m10_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) @@ -365,6 +395,7 @@ static void __init visstrim_m10_board_init(void) platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); + gpio_led_register_device(0, &visstrim_m10_led_data); visstrim_camera_init(); }
Vista Silicon Visstrim_m10 board has 4 leds to signal several working conditions. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> --- This patch has to be applied on top of the following series: [PATCH 0/4] i.MX27: visstrim_m10: Add several peripherals. --- arch/arm/mach-imx/Kconfig | 1 + arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 31 +++++++++++++++++++++++++++ 2 files changed, 32 insertions(+), 0 deletions(-)