| Message ID | 1309860396-9219-1-git-send-email-u.kleine-koenig@pengutronix.de |
|---|---|
| State | New |
| Headers | show |
On Tue, Jul 05, 2011 at 12:06:36PM +0200, Uwe Kleine-König wrote: > The pins are actually used (not in mainline yet): > > D4 -> SSP2_D0 > D5 -> GPIO > D6 -> GPIO > D7 -> GPIO for owire > > so their pinmapping for SSP0 is wrong. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Applied for next. Sascha > --- > arch/arm/mach-mxs/mach-tx28.c | 8 -------- > 1 files changed, 0 insertions(+), 8 deletions(-) > > diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c > index b65e371..068e540 100644 > --- a/arch/arm/mach-mxs/mach-tx28.c > +++ b/arch/arm/mach-mxs/mach-tx28.c > @@ -101,14 +101,6 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = { > (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), > MX28_PAD_SSP0_DATA3__SSP0_D3 | > (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), > - MX28_PAD_SSP0_DATA4__SSP0_D4 | > - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), > - MX28_PAD_SSP0_DATA5__SSP0_D5 | > - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), > - MX28_PAD_SSP0_DATA6__SSP0_D6 | > - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), > - MX28_PAD_SSP0_DATA7__SSP0_D7 | > - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), > MX28_PAD_SSP0_CMD__SSP0_CMD | > (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), > MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | > -- > 1.7.5.4 > >
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c index b65e371..068e540 100644 --- a/arch/arm/mach-mxs/mach-tx28.c +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -101,14 +101,6 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = { (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_SSP0_DATA3__SSP0_D3 | (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA4__SSP0_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA5__SSP0_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA6__SSP0_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA7__SSP0_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_SSP0_CMD__SSP0_CMD | (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
The pins are actually used (not in mainline yet): D4 -> SSP2_D0 D5 -> GPIO D6 -> GPIO D7 -> GPIO for owire so their pinmapping for SSP0 is wrong. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- arch/arm/mach-mxs/mach-tx28.c | 8 -------- 1 files changed, 0 insertions(+), 8 deletions(-)