diff mbox

arm: mxs: add mmc-device for mach-tx28

Message ID 1309532041-24452-1-git-send-email-w.sang@pengutronix.de
State New
Headers show

Commit Message

Wolfram Sang July 1, 2011, 2:54 p.m. UTC
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
---
 arch/arm/mach-mxs/Kconfig     |    1 +
 arch/arm/mach-mxs/mach-tx28.c |    6 ++++++
 2 files changed, 7 insertions(+), 0 deletions(-)

Comments

Lothar Waßmann July 4, 2011, 1:32 p.m. UTC | #1
Wolfram Sang writes:
> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
> ---
>  arch/arm/mach-mxs/Kconfig     |    1 +
>  arch/arm/mach-mxs/mach-tx28.c |    6 ++++++
>  2 files changed, 7 insertions(+), 0 deletions(-)
> 
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>

> diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
> index f114960..73556f0 100644
> --- a/arch/arm/mach-mxs/Kconfig
> +++ b/arch/arm/mach-mxs/Kconfig
> @@ -59,6 +59,7 @@ config MODULE_TX28
>  	select MXS_HAVE_PLATFORM_AUART
>  	select MXS_HAVE_PLATFORM_FEC
>  	select MXS_HAVE_PLATFORM_MXS_I2C
> +	select MXS_HAVE_PLATFORM_MXS_MMC
>  	select MXS_HAVE_PLATFORM_MXS_PWM
>  
>  config MACH_TX28
> diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
> index b65e371..91a4b78 100644
> --- a/arch/arm/mach-mxs/mach-tx28.c
> +++ b/arch/arm/mach-mxs/mach-tx28.c
> @@ -147,6 +147,11 @@ static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
>  	},
>  };
>  
> +static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
> +       .wp_gpio = -EINVAL,
> +       .flags = SLOTF_4_BIT_CAPABLE,
> +};
> +
>  static void __init tx28_stk5v3_init(void)
>  {
>  	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
> @@ -164,6 +169,7 @@ static void __init tx28_stk5v3_init(void)
>  	mx28_add_mxs_i2c(0);
>  	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
>  			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
> +	mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
>  }
>  
>  static void __init tx28_timer_init(void)
> -- 
> 1.7.5.3
> 
Lothar Waßmann
diff mbox

Patch

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index f114960..73556f0 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -59,6 +59,7 @@  config MODULE_TX28
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_FEC
 	select MXS_HAVE_PLATFORM_MXS_I2C
+	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXS_PWM
 
 config MACH_TX28
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index b65e371..91a4b78 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -147,6 +147,11 @@  static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
 	},
 };
 
+static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
+       .wp_gpio = -EINVAL,
+       .flags = SLOTF_4_BIT_CAPABLE,
+};
+
 static void __init tx28_stk5v3_init(void)
 {
 	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
@@ -164,6 +169,7 @@  static void __init tx28_stk5v3_init(void)
 	mx28_add_mxs_i2c(0);
 	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
 			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
+	mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
 }
 
 static void __init tx28_timer_init(void)