| Message ID | 20240301013759.516817-2-ipylypiv@google.com |
|---|---|
| State | New |
| Headers | show |
| Series | NCQ Priority sysfs sttributes for libsas | expand |
On 2024/02/29 17:37, Igor Pylypiv wrote: > Export libata NCQ Priority configuration helpers to be reused > for libsas managed SATA devices. > > Signed-off-by: Igor Pylypiv <ipylypiv@google.com> > Reviewed-by: TJ Adams <tadamsjr@google.com> Please drop this tag as the email signaling the review was not sent to the list/in-reply to this email. The name of the reviewer should also be fully spelled out. Same comment for the other 2 patches as they also have this review tag. > --- > drivers/ata/libata-sata.c | 130 +++++++++++++++++++++++++------------- > include/linux/libata.h | 4 ++ > 2 files changed, 90 insertions(+), 44 deletions(-) > > diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c > index 0fb1934875f2..9c6c69d7feab 100644 > --- a/drivers/ata/libata-sata.c > +++ b/drivers/ata/libata-sata.c > @@ -848,80 +848,104 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, > ata_scsi_lpm_show, ata_scsi_lpm_store); > EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); > > +/** > + * ata_ncq_prio_supported - Check if device supports NCQ Priority > + * @ap: ATA port of the target device > + * @sdev: SCSI device > + * > + * Helper to check if device supports NCQ Priority feature, > + * usable with both libsas and libata. > + */ > +int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev) > +{ > + struct ata_device *dev; > + unsigned long flags; > + int rc; > + > + spin_lock_irqsave(ap->lock, flags); > + dev = ata_scsi_find_dev(ap, sdev); > + rc = dev ? !!(dev->flags & ATA_DFLAG_NCQ_PRIO) : -ENODEV; Please expand this to make it more readable: if (!dev) rc = -ENODEV; else rc = !!(dev->flags & ATA_DFLAG_NCQ_PRIO); > + spin_unlock_irqrestore(ap->lock, flags); > + return rc; > +} > +EXPORT_SYMBOL_GPL(ata_ncq_prio_supported); > + > static ssize_t ata_ncq_prio_supported_show(struct device *device, > struct device_attribute *attr, > char *buf) > { > struct scsi_device *sdev = to_scsi_device(device); > struct ata_port *ap = ata_shost_to_port(sdev->host); > - struct ata_device *dev; > - bool ncq_prio_supported; > - int rc = 0; > - > - spin_lock_irq(ap->lock); > - dev = ata_scsi_find_dev(ap, sdev); > - if (!dev) > - rc = -ENODEV; > - else > - ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO; > - spin_unlock_irq(ap->lock); > + int rc = ata_ncq_prio_supported(ap, sdev); > > - return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported); > + return (rc < 0) ? rc : sysfs_emit(buf, "%u\n", rc); Same here, please expand: if (rc < 0) return rc; return sysfs_emit(buf, "%d\n", rc); And please not the change %u -> %d > } > - whiteline change. Please keep the white line. > DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL); > EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported); > > +/** > + * ata_ncq_prio_enabled - Check if NCQ Priority is enabled > + * @ap: ATA port of the target device > + * @sdev: SCSI device > + * > + * Helper to check if NCQ Priority feature is enabled, > + * usable with both libsas and libata. > + */ > +int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev) > +{ > + struct ata_device *dev; > + unsigned long flags; > + int rc; > + > + spin_lock_irqsave(ap->lock, flags); > + dev = ata_scsi_find_dev(ap, sdev); > + rc = dev ? !!(dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED) : -ENODEV; same comment as above. Please expand. > + spin_unlock_irqrestore(ap->lock, flags); > + return rc; > +} > +EXPORT_SYMBOL_GPL(ata_ncq_prio_enabled); > + > static ssize_t ata_ncq_prio_enable_show(struct device *device, > struct device_attribute *attr, > char *buf) > { > struct scsi_device *sdev = to_scsi_device(device); > struct ata_port *ap = ata_shost_to_port(sdev->host); > - struct ata_device *dev; > - bool ncq_prio_enable; > - int rc = 0; > - > - spin_lock_irq(ap->lock); > - dev = ata_scsi_find_dev(ap, sdev); > - if (!dev) > - rc = -ENODEV; > - else > - ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED; > - spin_unlock_irq(ap->lock); > + int rc = ata_ncq_prio_enabled(ap, sdev); > > - return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_enable); > + return (rc < 0) ? rc : sysfs_emit(buf, "%u\n", rc); same comment as above. > } > > -static ssize_t ata_ncq_prio_enable_store(struct device *device, > - struct device_attribute *attr, > - const char *buf, size_t len) > +/** > + * ata_ncq_prio_enable - Enable/disable NCQ Priority > + * @ap: ATA port of the target device > + * @sdev: SCSI device > + * @enable: true - enable NCQ Priority, false - disable NCQ Priority > + * > + * Helper to enable/disable NCQ Priority feature, usable with both > + * libsas and libata. > + */ > +int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev, > + bool enable) > { > - struct scsi_device *sdev = to_scsi_device(device); > - struct ata_port *ap; > struct ata_device *dev; > - long int input; > + unsigned long flags; > int rc = 0; > > - rc = kstrtol(buf, 10, &input); > - if (rc) > - return rc; > - if ((input < 0) || (input > 1)) > - return -EINVAL; > + spin_lock_irqsave(ap->lock, flags); Any reason to not use spin_lock_irq() ? > > - ap = ata_shost_to_port(sdev->host); > dev = ata_scsi_find_dev(ap, sdev); > - if (unlikely(!dev)) > - return -ENODEV; > - > - spin_lock_irq(ap->lock); > + if (unlikely(!dev)) { > + rc = -ENODEV; > + goto unlock; > + } > > if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) { > rc = -EINVAL; > goto unlock; > } > > - if (input) { > + if (enable) { > if (dev->flags & ATA_DFLAG_CDL_ENABLED) { > ata_dev_err(dev, > "CDL must be disabled to enable NCQ priority\n"); > @@ -934,9 +958,27 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device, > } > > unlock: > - spin_unlock_irq(ap->lock); > + spin_unlock_irqrestore(ap->lock, flags); > + return rc; > +} > +EXPORT_SYMBOL_GPL(ata_ncq_prio_enable); > + > +static ssize_t ata_ncq_prio_enable_store(struct device *device, > + struct device_attribute *attr, > + const char *buf, size_t len) > +{ > + struct scsi_device *sdev = to_scsi_device(device); > + struct ata_port *ap = ata_shost_to_port(sdev->host); > + long input; > + int rc = 0; > + > + rc = kstrtol(buf, 10, &input); Please use kstrtobool(). > + if (rc) > + return rc; > + if ((input < 0) || (input > 1)) > + return -EINVAL; > > - return rc ? rc : len; > + return ata_ncq_prio_enable(ap, sdev, input) ? : len; > } > > DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR, > diff --git a/include/linux/libata.h b/include/linux/libata.h > index 26d68115afb8..f3ff2bf3ec6b 100644 > --- a/include/linux/libata.h > +++ b/include/linux/libata.h > @@ -1157,6 +1157,10 @@ extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, > int queue_depth); > extern int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev, > int queue_depth); > +extern int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev); > +extern int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev); > +extern int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev, > + bool enable); > extern struct ata_device *ata_dev_pair(struct ata_device *adev); > extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); > extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
On Fri, Mar 01, 2024 at 04:16:46AM -0800, Damien Le Moal wrote: Thank you for the review Damien! > On 2024/02/29 17:37, Igor Pylypiv wrote: > > Export libata NCQ Priority configuration helpers to be reused > > for libsas managed SATA devices. > > > > Signed-off-by: Igor Pylypiv <ipylypiv@google.com> > > Reviewed-by: TJ Adams <tadamsjr@google.com> > > Please drop this tag as the email signaling the review was not sent to the > list/in-reply to this email. The name of the reviewer should also be fully > spelled out. Same comment for the other 2 patches as they also have this review tag. > > > --- > > drivers/ata/libata-sata.c | 130 +++++++++++++++++++++++++------------- > > include/linux/libata.h | 4 ++ > > 2 files changed, 90 insertions(+), 44 deletions(-) > > > > diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c > > index 0fb1934875f2..9c6c69d7feab 100644 > > --- a/drivers/ata/libata-sata.c > > +++ b/drivers/ata/libata-sata.c > > @@ -848,80 +848,104 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, > > ata_scsi_lpm_show, ata_scsi_lpm_store); > > EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); > > > > +/** > > + * ata_ncq_prio_supported - Check if device supports NCQ Priority > > + * @ap: ATA port of the target device > > + * @sdev: SCSI device > > + * > > + * Helper to check if device supports NCQ Priority feature, > > + * usable with both libsas and libata. > > + */ > > +int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev) > > +{ > > + struct ata_device *dev; > > + unsigned long flags; > > + int rc; > > + > > + spin_lock_irqsave(ap->lock, flags); > > + dev = ata_scsi_find_dev(ap, sdev); > > + rc = dev ? !!(dev->flags & ATA_DFLAG_NCQ_PRIO) : -ENODEV; > > Please expand this to make it more readable: > > if (!dev) > rc = -ENODEV; > else > rc = !!(dev->flags & ATA_DFLAG_NCQ_PRIO); > > > + spin_unlock_irqrestore(ap->lock, flags); > > + return rc; > > +} > > +EXPORT_SYMBOL_GPL(ata_ncq_prio_supported); > > + > > static ssize_t ata_ncq_prio_supported_show(struct device *device, > > struct device_attribute *attr, > > char *buf) > > { > > struct scsi_device *sdev = to_scsi_device(device); > > struct ata_port *ap = ata_shost_to_port(sdev->host); > > - struct ata_device *dev; > > - bool ncq_prio_supported; > > - int rc = 0; > > - > > - spin_lock_irq(ap->lock); > > - dev = ata_scsi_find_dev(ap, sdev); > > - if (!dev) > > - rc = -ENODEV; > > - else > > - ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO; > > - spin_unlock_irq(ap->lock); > > + int rc = ata_ncq_prio_supported(ap, sdev); > > > > - return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported); > > + return (rc < 0) ? rc : sysfs_emit(buf, "%u\n", rc); > > Same here, please expand: > > if (rc < 0) > return rc; > return sysfs_emit(buf, "%d\n", rc); > > And please not the change %u -> %d > > > } > > - > > whiteline change. Please keep the white line. > > > DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL); > > EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported); > > > > +/** > > + * ata_ncq_prio_enabled - Check if NCQ Priority is enabled > > + * @ap: ATA port of the target device > > + * @sdev: SCSI device > > + * > > + * Helper to check if NCQ Priority feature is enabled, > > + * usable with both libsas and libata. > > + */ > > +int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev) > > +{ > > + struct ata_device *dev; > > + unsigned long flags; > > + int rc; > > + > > + spin_lock_irqsave(ap->lock, flags); > > + dev = ata_scsi_find_dev(ap, sdev); > > + rc = dev ? !!(dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED) : -ENODEV; > > same comment as above. Please expand. > > > + spin_unlock_irqrestore(ap->lock, flags); > > + return rc; > > +} > > +EXPORT_SYMBOL_GPL(ata_ncq_prio_enabled); > > + > > static ssize_t ata_ncq_prio_enable_show(struct device *device, > > struct device_attribute *attr, > > char *buf) > > { > > struct scsi_device *sdev = to_scsi_device(device); > > struct ata_port *ap = ata_shost_to_port(sdev->host); > > - struct ata_device *dev; > > - bool ncq_prio_enable; > > - int rc = 0; > > - > > - spin_lock_irq(ap->lock); > > - dev = ata_scsi_find_dev(ap, sdev); > > - if (!dev) > > - rc = -ENODEV; > > - else > > - ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED; > > - spin_unlock_irq(ap->lock); > > + int rc = ata_ncq_prio_enabled(ap, sdev); > > > > - return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_enable); > > + return (rc < 0) ? rc : sysfs_emit(buf, "%u\n", rc); > > same comment as above. > > > } > > > > -static ssize_t ata_ncq_prio_enable_store(struct device *device, > > - struct device_attribute *attr, > > - const char *buf, size_t len) > > +/** > > + * ata_ncq_prio_enable - Enable/disable NCQ Priority > > + * @ap: ATA port of the target device > > + * @sdev: SCSI device > > + * @enable: true - enable NCQ Priority, false - disable NCQ Priority > > + * > > + * Helper to enable/disable NCQ Priority feature, usable with both > > + * libsas and libata. > > + */ > > +int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev, > > + bool enable) > > { > > - struct scsi_device *sdev = to_scsi_device(device); > > - struct ata_port *ap; > > struct ata_device *dev; > > - long int input; > > + unsigned long flags; > > int rc = 0; > > > > - rc = kstrtol(buf, 10, &input); > > - if (rc) > > - return rc; > > - if ((input < 0) || (input > 1)) > > - return -EINVAL; > > + spin_lock_irqsave(ap->lock, flags); > > Any reason to not use spin_lock_irq() ? In the future someone might call these helper functions when interrupts are disabled. spin_unlock_irq() might re-enable interrupts prematurely. spin_unlock_irqrestore() will restore the same interrupts state that was before the call to spin_lock_irqsave(). > > > > > - ap = ata_shost_to_port(sdev->host); > > dev = ata_scsi_find_dev(ap, sdev); > > - if (unlikely(!dev)) > > - return -ENODEV; > > - > > - spin_lock_irq(ap->lock); > > + if (unlikely(!dev)) { > > + rc = -ENODEV; > > + goto unlock; > > + } > > > > if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) { > > rc = -EINVAL; > > goto unlock; > > } > > > > - if (input) { > > + if (enable) { > > if (dev->flags & ATA_DFLAG_CDL_ENABLED) { > > ata_dev_err(dev, > > "CDL must be disabled to enable NCQ priority\n"); > > @@ -934,9 +958,27 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device, > > } > > > > unlock: > > - spin_unlock_irq(ap->lock); > > + spin_unlock_irqrestore(ap->lock, flags); > > + return rc; > > +} > > +EXPORT_SYMBOL_GPL(ata_ncq_prio_enable); > > + > > +static ssize_t ata_ncq_prio_enable_store(struct device *device, > > + struct device_attribute *attr, > > + const char *buf, size_t len) > > +{ > > + struct scsi_device *sdev = to_scsi_device(device); > > + struct ata_port *ap = ata_shost_to_port(sdev->host); > > + long input; > > + int rc = 0; > > + > > + rc = kstrtol(buf, 10, &input); > > Please use kstrtobool(). > > > + if (rc) > > + return rc; > > + if ((input < 0) || (input > 1)) > > + return -EINVAL; > > > > - return rc ? rc : len; > > + return ata_ncq_prio_enable(ap, sdev, input) ? : len; > > } > > > > DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR, > > diff --git a/include/linux/libata.h b/include/linux/libata.h > > index 26d68115afb8..f3ff2bf3ec6b 100644 > > --- a/include/linux/libata.h > > +++ b/include/linux/libata.h > > @@ -1157,6 +1157,10 @@ extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, > > int queue_depth); > > extern int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev, > > int queue_depth); > > +extern int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev); > > +extern int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev); > > +extern int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev, > > + bool enable); > > extern struct ata_device *ata_dev_pair(struct ata_device *adev); > > extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); > > extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap); > > -- > Damien Le Moal > Western Digital Research >
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index 0fb1934875f2..9c6c69d7feab 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -848,80 +848,104 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, ata_scsi_lpm_show, ata_scsi_lpm_store); EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); +/** + * ata_ncq_prio_supported - Check if device supports NCQ Priority + * @ap: ATA port of the target device + * @sdev: SCSI device + * + * Helper to check if device supports NCQ Priority feature, + * usable with both libsas and libata. + */ +int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev) +{ + struct ata_device *dev; + unsigned long flags; + int rc; + + spin_lock_irqsave(ap->lock, flags); + dev = ata_scsi_find_dev(ap, sdev); + rc = dev ? !!(dev->flags & ATA_DFLAG_NCQ_PRIO) : -ENODEV; + spin_unlock_irqrestore(ap->lock, flags); + return rc; +} +EXPORT_SYMBOL_GPL(ata_ncq_prio_supported); + static ssize_t ata_ncq_prio_supported_show(struct device *device, struct device_attribute *attr, char *buf) { struct scsi_device *sdev = to_scsi_device(device); struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev; - bool ncq_prio_supported; - int rc = 0; - - spin_lock_irq(ap->lock); - dev = ata_scsi_find_dev(ap, sdev); - if (!dev) - rc = -ENODEV; - else - ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO; - spin_unlock_irq(ap->lock); + int rc = ata_ncq_prio_supported(ap, sdev); - return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported); + return (rc < 0) ? rc : sysfs_emit(buf, "%u\n", rc); } - DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL); EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported); +/** + * ata_ncq_prio_enabled - Check if NCQ Priority is enabled + * @ap: ATA port of the target device + * @sdev: SCSI device + * + * Helper to check if NCQ Priority feature is enabled, + * usable with both libsas and libata. + */ +int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev) +{ + struct ata_device *dev; + unsigned long flags; + int rc; + + spin_lock_irqsave(ap->lock, flags); + dev = ata_scsi_find_dev(ap, sdev); + rc = dev ? !!(dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED) : -ENODEV; + spin_unlock_irqrestore(ap->lock, flags); + return rc; +} +EXPORT_SYMBOL_GPL(ata_ncq_prio_enabled); + static ssize_t ata_ncq_prio_enable_show(struct device *device, struct device_attribute *attr, char *buf) { struct scsi_device *sdev = to_scsi_device(device); struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev; - bool ncq_prio_enable; - int rc = 0; - - spin_lock_irq(ap->lock); - dev = ata_scsi_find_dev(ap, sdev); - if (!dev) - rc = -ENODEV; - else - ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED; - spin_unlock_irq(ap->lock); + int rc = ata_ncq_prio_enabled(ap, sdev); - return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_enable); + return (rc < 0) ? rc : sysfs_emit(buf, "%u\n", rc); } -static ssize_t ata_ncq_prio_enable_store(struct device *device, - struct device_attribute *attr, - const char *buf, size_t len) +/** + * ata_ncq_prio_enable - Enable/disable NCQ Priority + * @ap: ATA port of the target device + * @sdev: SCSI device + * @enable: true - enable NCQ Priority, false - disable NCQ Priority + * + * Helper to enable/disable NCQ Priority feature, usable with both + * libsas and libata. + */ +int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev, + bool enable) { - struct scsi_device *sdev = to_scsi_device(device); - struct ata_port *ap; struct ata_device *dev; - long int input; + unsigned long flags; int rc = 0; - rc = kstrtol(buf, 10, &input); - if (rc) - return rc; - if ((input < 0) || (input > 1)) - return -EINVAL; + spin_lock_irqsave(ap->lock, flags); - ap = ata_shost_to_port(sdev->host); dev = ata_scsi_find_dev(ap, sdev); - if (unlikely(!dev)) - return -ENODEV; - - spin_lock_irq(ap->lock); + if (unlikely(!dev)) { + rc = -ENODEV; + goto unlock; + } if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) { rc = -EINVAL; goto unlock; } - if (input) { + if (enable) { if (dev->flags & ATA_DFLAG_CDL_ENABLED) { ata_dev_err(dev, "CDL must be disabled to enable NCQ priority\n"); @@ -934,9 +958,27 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device, } unlock: - spin_unlock_irq(ap->lock); + spin_unlock_irqrestore(ap->lock, flags); + return rc; +} +EXPORT_SYMBOL_GPL(ata_ncq_prio_enable); + +static ssize_t ata_ncq_prio_enable_store(struct device *device, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct scsi_device *sdev = to_scsi_device(device); + struct ata_port *ap = ata_shost_to_port(sdev->host); + long input; + int rc = 0; + + rc = kstrtol(buf, 10, &input); + if (rc) + return rc; + if ((input < 0) || (input > 1)) + return -EINVAL; - return rc ? rc : len; + return ata_ncq_prio_enable(ap, sdev, input) ? : len; } DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR, diff --git a/include/linux/libata.h b/include/linux/libata.h index 26d68115afb8..f3ff2bf3ec6b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1157,6 +1157,10 @@ extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth); extern int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev, int queue_depth); +extern int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev); +extern int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev); +extern int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev, + bool enable); extern struct ata_device *ata_dev_pair(struct ata_device *adev); extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);