@@ -1,11 +1,10 @@
-/*
- on26.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
- Under the terms of the GNU General Public License.
-
- on26.c is a low-level protocol driver for the
- OnSpec 90c26 parallel to IDE adapter chip.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998 Grant R. Guenther <grant@torque.net>
+ *
+ * on26.c is a low-level protocol driver for the
+ * OnSpec 90c26 parallel to IDE adapter chip.
+ */
#include <linux/module.h>
#include <linux/init.h>
@@ -16,260 +15,281 @@
#include <asm/io.h>
#include "pata_parport.h"
-/* mode codes: 0 nybble reads, 8-bit writes
- 1 8-bit reads and writes
- 2 8-bit EPP mode
- 3 EPP-16
- 4 EPP-32
-*/
+/*
+ * mode codes: 0 nybble reads, 8-bit writes
+ * 1 8-bit reads and writes
+ * 2 8-bit EPP mode
+ * 3 EPP-16
+ * 4 EPP-32
+ */
-#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
+#define j44(a, b) (((a >> 4) & 0x0f) | (b & 0xf0))
-#define P1 w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
-#define P2 w2(5);w2(7);w2(5);w2(4);
+#define P1 \
+ do { \
+ w2(5); w2(0xd); w2(5); w2(0xd); w2(5); w2(4); \
+ } while (0)
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
-static int on26_read_regr(struct pi_adapter *pi, int cont, int regr)
+#define P2 \
+ do { \
+ w2(5); w2(7); w2(5); w2(4); \
+ } while (0)
-{ int a, b, r;
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
- r = (regr<<2) + 1 + cont;
+static int on26_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+ int a, b, r;
- switch (pi->mode) {
+ r = (regr << 2) + 1 + cont;
- case 0: w0(1); P1; w0(r); P2; w0(0); P1;
+ switch (pi->mode) {
+ case 0:
+ w0(1); P1; w0(r); P2; w0(0); P1;
w2(6); a = r1(); w2(4);
w2(6); b = r1(); w2(4);
w2(6); w2(4); w2(6); w2(4);
- return j44(a,b);
-
- case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+ return j44(a, b);
+ case 1:
+ w0(1); P1; w0(r); P2; w0(0); P1;
w2(0x26); a = r0(); w2(4); w2(0x26); w2(4);
- return a;
-
+ return a;
case 2:
case 3:
- case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
+ case 4:
+ w3(1); w3(1); w2(5); w4(r); w2(4);
w3(0); w3(0); w2(0x24); a = r4(); w2(4);
w2(0x24); (void)r4(); w2(4);
- return a;
+ return a;
+ }
- }
- return -1;
-}
+ return -1;
+}
static void on26_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+ int r = (regr << 2) + 1 + cont;
-{ int r;
-
- r = (regr<<2) + 1 + cont;
-
- switch (pi->mode) {
-
- case 0:
- case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+ switch (pi->mode) {
+ case 0:
+ case 1:
+ w0(1); P1; w0(r); P2; w0(0); P1;
w0(val); P2; w0(val); P2;
break;
-
case 2:
case 3:
- case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
- w3(0); w3(0);
+ case 4:
+ w3(1); w3(1); w2(5); w4(r); w2(4);
+ w3(0); w3(0);
w2(5); w4(val); w2(4);
w2(5); w4(val); w2(4);
- break;
- }
+ break;
+ }
}
-#define CCP(x) w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
- w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+#define CCP(x) \
+ do { \
+ w0(0xfe); w0(0xaa); w0(0x55); w0(0); \
+ w0(0xff); w0(0x87); w0(0x78); w0(x); \
+ w2(4); w2(5); w2(4); w0(0xff); \
+ } while (0)
static void on26_connect(struct pi_adapter *pi)
-
-{ int x;
+{
+ int x;
pi->saved_r0 = r0();
- pi->saved_r2 = r2();
+ pi->saved_r2 = r2();
- CCP(0x20);
- x = 8; if (pi->mode) x = 9;
+ CCP(0x20);
+ if (pi->mode)
+ x = 9;
+ else
+ x = 8;
w0(2); P1; w0(8); P2;
w0(2); P1; w0(x); P2;
}
static void on26_disconnect(struct pi_adapter *pi)
-
-{ if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); }
- else { w0(4); P1; w0(4); P1; }
+{
+ if (pi->mode >= 2) {
+ w3(4); w3(4); w3(4); w3(4);
+ } else {
+ w0(4); P1; w0(4); P1;
+ }
CCP(0x30);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
#define RESET_WAIT 200
-static int on26_test_port(struct pi_adapter *pi) /* hard reset */
+/* hard reset */
+static int on26_test_port(struct pi_adapter *pi)
+{
+ int i, m, d, x = 0, y = 0;
-{ int i, m, d, x=0, y=0;
-
- pi->saved_r0 = r0();
- pi->saved_r2 = r2();
-
- d = pi->delay;
- m = pi->mode;
- pi->delay = 5;
- pi->mode = 0;
-
- w2(0xc);
-
- CCP(0x30); CCP(0);
-
- w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);
- i = ((r1() & 0xf0) << 4); w0(0x87);
- i |= (r1() & 0xf0); w0(0x78);
- w0(0x20);w2(4);w2(5);
- i |= ((r1() & 0xf0) >> 4);
- w2(4);w0(0xff);
-
- if (i == 0xb5f) {
-
- w0(2); P1; w0(0); P2;
- w0(3); P1; w0(0); P2;
- w0(2); P1; w0(8); P2; udelay(100);
- w0(2); P1; w0(0xa); P2; udelay(100);
- w0(2); P1; w0(8); P2; udelay(1000);
-
- on26_write_regr(pi,0,6,0xa0);
-
- for (i=0;i<RESET_WAIT;i++) {
- on26_write_regr(pi,0,6,0xa0);
- x = on26_read_regr(pi,0,7);
- on26_write_regr(pi,0,6,0xb0);
- y = on26_read_regr(pi,0,7);
- if (!((x&0x80)||(y&0x80))) break;
- mdelay(100);
- }
-
- if (i == RESET_WAIT)
- dev_err(&pi->dev, "on26: Device reset failed (%x,%x)\n", x, y);
-
- w0(4); P1; w0(4); P1;
- }
+ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ d = pi->delay;
+ m = pi->mode;
+ pi->delay = 5;
+ pi->mode = 0;
+
+ w2(0xc);
+
+ CCP(0x30); CCP(0);
+
+ w0(0xfe); w0(0xaa); w0(0x55); w0(0); w0(0xff);
+ i = ((r1() & 0xf0) << 4); w0(0x87);
+ i |= (r1() & 0xf0); w0(0x78);
+ w0(0x20); w2(4); w2(5);
+ i |= ((r1() & 0xf0) >> 4);
+ w2(4); w0(0xff);
+
+ if (i == 0xb5f) {
+ w0(2); P1; w0(0); P2;
+ w0(3); P1; w0(0); P2;
+ w0(2); P1; w0(8); P2; udelay(100);
+ w0(2); P1; w0(0xa); P2; udelay(100);
+ w0(2); P1; w0(8); P2; udelay(1000);
+
+ on26_write_regr(pi, 0, 6, 0xa0);
+
+ for (i = 0; i < RESET_WAIT; i++) {
+ on26_write_regr(pi, 0, 6, 0xa0);
+ x = on26_read_regr(pi, 0, 7);
+ on26_write_regr(pi, 0, 6, 0xb0);
+ y = on26_read_regr(pi, 0, 7);
+ if (!((x & 0x80) || (y & 0x80)))
+ break;
+ mdelay(100);
+ }
+
+ if (i == RESET_WAIT)
+ dev_err(&pi->dev,
+ "on26: Device reset failed (%x,%x)\n", x, y);
+
+ w0(4); P1; w0(4); P1;
+ }
- CCP(0x30);
+ CCP(0x30);
- pi->delay = d;
- pi->mode = m;
- w0(pi->saved_r0);
- w2(pi->saved_r2);
+ pi->delay = d;
+ pi->mode = m;
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
- return 5;
+ return 5;
}
-
static void on26_read_block(struct pi_adapter *pi, char *buf, int count)
+{
+ int k, a, b;
-{ int k, a, b;
-
- switch (pi->mode) {
-
- case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
+ switch (pi->mode) {
+ case 0:
+ w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
udelay(10);
- for (k=0;k<count;k++) {
- w2(6); a = r1();
- w2(4); b = r1();
- buf[k] = j44(a,b);
- }
- w0(2); P1; w0(8); P2;
- break;
-
- case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
+ for (k = 0; k < count; k++) {
+ w2(6); a = r1();
+ w2(4); b = r1();
+ buf[k] = j44(a, b);
+ }
+ w0(2); P1; w0(8); P2;
+ break;
+ case 1:
+ w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
+ udelay(10);
+ for (k = 0; k < count / 2; k++) {
+ w2(0x26); buf[2 * k] = r0();
+ w2(0x24); buf[2 * k + 1] = r0();
+ }
+ w0(2); P1; w0(9); P2;
+ break;
+ case 2:
+ w3(1); w3(1); w2(5); w4(1); w2(4);
+ w3(0); w3(0); w2(0x24);
+ udelay(10);
+ for (k = 0; k < count; k++)
+ buf[k] = r4();
+ w2(4);
+ break;
+ case 3:
+ w3(1); w3(1); w2(5); w4(1); w2(4);
+ w3(0); w3(0); w2(0x24);
udelay(10);
- for (k=0;k<count/2;k++) {
- w2(0x26); buf[2*k] = r0();
- w2(0x24); buf[2*k+1] = r0();
- }
- w0(2); P1; w0(9); P2;
- break;
-
- case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+ for (k = 0; k < count / 2; k++)
+ ((u16 *)buf)[k] = r4w();
+ w2(4);
+ break;
+ case 4:
+ w3(1); w3(1); w2(5); w4(1); w2(4);
w3(0); w3(0); w2(0x24);
udelay(10);
- for (k=0;k<count;k++) buf[k] = r4();
- w2(4);
- break;
-
- case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
- w3(0); w3(0); w2(0x24);
- udelay(10);
- for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
- w2(4);
- break;
-
- case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
- w3(0); w3(0); w2(0x24);
- udelay(10);
- for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
- w2(4);
- break;
-
- }
+ for (k = 0; k < count / 4; k++)
+ ((u32 *)buf)[k] = r4l();
+ w2(4);
+ break;
+ }
}
static void on26_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{ int k;
-
- switch (pi->mode) {
-
- case 0:
- case 1: w0(1); P1; w0(1); P2;
- w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1;
+{
+ int k;
+
+ switch (pi->mode) {
+ case 0:
+ case 1:
+ w0(1); P1; w0(1); P2;
+ w0(2); P1; w0(0x18 + pi->mode); P2; w0(0); P1;
udelay(10);
- for (k=0;k<count/2;k++) {
- w2(5); w0(buf[2*k]);
- w2(7); w0(buf[2*k+1]);
- }
- w2(5); w2(4);
- w0(2); P1; w0(8+pi->mode); P2;
- break;
-
- case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+ for (k = 0; k < count / 2; k++) {
+ w2(5); w0(buf[2 * k]);
+ w2(7); w0(buf[2 * k + 1]);
+ }
+ w2(5); w2(4);
+ w0(2); P1; w0(8 + pi->mode); P2;
+ break;
+ case 2:
+ w3(1); w3(1); w2(5); w4(1); w2(4);
w3(0); w3(0); w2(0xc5);
udelay(10);
- for (k=0;k<count;k++) w4(buf[k]);
+ for (k = 0; k < count; k++)
+ w4(buf[k]);
w2(0xc4);
- break;
-
- case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
- w3(0); w3(0); w2(0xc5);
- udelay(10);
- for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
- w2(0xc4);
- break;
-
- case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
- w3(0); w3(0); w2(0xc5);
- udelay(10);
- for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
- w2(0xc4);
- break;
-
- }
-
+ break;
+ case 3:
+ w3(1); w3(1); w2(5); w4(1); w2(4);
+ w3(0); w3(0); w2(0xc5);
+ udelay(10);
+ for (k = 0; k < count / 2; k++)
+ w4w(((u16 *)buf)[k]);
+ w2(0xc4);
+ break;
+ case 4:
+ w3(1); w3(1); w2(5); w4(1); w2(4);
+ w3(0); w3(0); w2(0xc5);
+ udelay(10);
+ for (k = 0; k < count / 4; k++)
+ w4l(((u32 *)buf)[k]);
+ w2(0xc4);
+ break;
+ }
}
static void on26_log_adapter(struct pi_adapter *pi)
+{
+ char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
-{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
- "EPP-16","EPP-32"};
-
- dev_info(&pi->dev, "OnSpec 90c26 at 0x%x, mode %d (%s), delay %d\n",
- pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+ dev_info(&pi->dev,
+ "OnSpec 90c26 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol on26 = {
Fix the header, indentation and coding style in the on26 pata parport protocol module to suppress warnings from smatch and other static code analyzers. No functional changes. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> --- drivers/ata/pata_parport/on26.c | 414 +++++++++++++++++--------------- 1 file changed, 217 insertions(+), 197 deletions(-)