From patchwork Wed Dec 8 16:32:11 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hannes Reinecke X-Patchwork-Id: 1565311 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=suse.de header.i=@suse.de header.a=rsa-sha256 header.s=susede2_rsa header.b=1+jEO4OA; dkim=pass header.d=suse.de header.i=@suse.de header.a=ed25519-sha256 header.s=susede2_ed25519 header.b=nfMgPW+V; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4J8N576Q3fz9tk7 for ; Thu, 9 Dec 2021 03:33:15 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237017AbhLHQgq (ORCPT ); Wed, 8 Dec 2021 11:36:46 -0500 Received: from smtp-out2.suse.de ([195.135.220.29]:37726 "EHLO smtp-out2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237021AbhLHQgh (ORCPT ); Wed, 8 Dec 2021 11:36:37 -0500 Received: from relay2.suse.de (relay2.suse.de [149.44.160.134]) by smtp-out2.suse.de (Postfix) with ESMTP id 879E41FE15; Wed, 8 Dec 2021 16:33:00 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=suse.de; s=susede2_rsa; t=1638981180; h=from:from:reply-to:date:date:message-id:message-id:to:to:cc:cc: mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=iIWtJ061dNZxVhkMNbtLB5KwIXLdM8iTsZlGUw0n2EE=; b=1+jEO4OApwCBhkLof4hBuTn1clO1S8e0HFdtxXCfEStKxIFDU//HBEW3sgHVujbcgSBW/7 nDBdRpkF4HQP0nu8P2UDp1ahAIybwLwk1tFLCDQvWpxdoJRY6NS80Y+ZBDnhMO7DpdpQQE B9iGb2fa544Qx6R5wNdOv3HvNKDL3HM= DKIM-Signature: v=1; a=ed25519-sha256; c=relaxed/relaxed; d=suse.de; s=susede2_ed25519; t=1638981180; h=from:from:reply-to:date:date:message-id:message-id:to:to:cc:cc: mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=iIWtJ061dNZxVhkMNbtLB5KwIXLdM8iTsZlGUw0n2EE=; b=nfMgPW+VbJbP9XWpCya7G5cN0/sZAkvvLAgmTMSu3bf4Bl0GNFbZjRkzu87rpowtyjOZDW 9SPlGGWyQ0IBXjDQ== Received: from adalid.arch.suse.de (adalid.arch.suse.de [10.161.8.13]) by relay2.suse.de (Postfix) with ESMTP id 82D6FA3BB0; Wed, 8 Dec 2021 16:33:00 +0000 (UTC) Received: by adalid.arch.suse.de (Postfix, from userid 16045) id 7E7D45191F97; Wed, 8 Dec 2021 17:33:00 +0100 (CET) From: Hannes Reinecke To: Damien LeMoal Cc: linux-ide@vger.kernel.org, Hannes Reinecke , Hannes Reinecke Subject: [PATCH 29/73] pata_pdc2027x: Replace PDPRINTK() with standard ata logging Date: Wed, 8 Dec 2021 17:32:11 +0100 Message-Id: <20211208163255.114660-30-hare@suse.de> X-Mailer: git-send-email 2.29.2 In-Reply-To: <20211208163255.114660-1-hare@suse.de> References: <20211208163255.114660-1-hare@suse.de> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org From: Hannes Reinecke Use standard ata logging macros instead of the hand-crafted PDPRINTK and remove duplicate logging messages. Signed-off-by: Hannes Reinecke --- drivers/ata/pata_pdc2027x.c | 71 +++++++++++++++---------------------- 1 file changed, 28 insertions(+), 43 deletions(-) diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index effc1a09444d..4fbb3eed8b0b 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -30,13 +30,6 @@ #define DRV_NAME "pata_pdc2027x" #define DRV_VERSION "1.0" -#undef PDC_DEBUG - -#ifdef PDC_DEBUG -#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) -#else -#define PDPRINTK(fmt, args...) -#endif enum { PDC_MMIO_BAR = 5, @@ -214,11 +207,11 @@ static int pdc2027x_cable_detect(struct ata_port *ap) if (cgcr & (1 << 26)) goto cbl40; - PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no); + ata_port_dbg(ap, "No cable or 80-conductor cable\n"); return ATA_CBL_PATA80; cbl40: - printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no); + ata_port_info(ap, DRV_NAME ":40-conductor cable detected\n"); return ATA_CBL_PATA40; } @@ -292,17 +285,17 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev) unsigned int pio = adev->pio_mode - XFER_PIO_0; u32 ctcr0, ctcr1; - PDPRINTK("adev->pio_mode[%X]\n", adev->pio_mode); + ata_port_dbg(ap, "adev->pio_mode[%X]\n", adev->pio_mode); /* Sanity check */ if (pio > 4) { - printk(KERN_ERR DRV_NAME ": Unknown pio mode [%d] ignored\n", pio); + ata_port_err(ap, "Unknown pio mode [%d] ignored\n", pio); return; } /* Set the PIO timing registers using value table for 133MHz */ - PDPRINTK("Set pio regs... \n"); + ata_port_dbg(ap, "Set pio regs... \n"); ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0)); ctcr0 &= 0xffff0000; @@ -315,9 +308,7 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev) ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24); iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); - PDPRINTK("Set pio regs done\n"); - - PDPRINTK("Set to pio mode[%u] \n", pio); + ata_port_dbg(ap, "Set to pio mode[%u] \n", pio); } /** @@ -350,7 +341,7 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1)); } - PDPRINTK("Set udma regs... \n"); + ata_port_dbg(ap, "Set udma regs... \n"); ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); ctcr1 &= 0xff000000; @@ -359,16 +350,14 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) (pdc2027x_udma_timing_tbl[udma_mode].value2 << 16); iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); - PDPRINTK("Set udma regs done\n"); - - PDPRINTK("Set to udma mode[%u] \n", udma_mode); + ata_port_dbg(ap, "Set to udma mode[%u] \n", udma_mode); } else if ((dma_mode >= XFER_MW_DMA_0) && (dma_mode <= XFER_MW_DMA_2)) { /* Set the MDMA timing registers with value table for 133MHz */ unsigned int mdma_mode = dma_mode & 0x07; - PDPRINTK("Set mdma regs... \n"); + ata_port_dbg(ap, "Set mdma regs... \n"); ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0)); ctcr0 &= 0x0000ffff; @@ -376,11 +365,10 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) (pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24); iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); - PDPRINTK("Set mdma regs done\n"); - PDPRINTK("Set to mdma mode[%u] \n", mdma_mode); + ata_port_dbg(ap, "Set to mdma mode[%u] \n", mdma_mode); } else { - printk(KERN_ERR DRV_NAME ": Unknown dma mode [%u] ignored\n", dma_mode); + ata_port_err(ap, "Unknown dma mode [%u] ignored\n", dma_mode); } } @@ -414,7 +402,7 @@ static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed ctcr1 |= (1 << 25); iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1)); - PDPRINTK("Turn on prefetch\n"); + ata_dev_dbg(dev, "Turn on prefetch\n"); } else { pdc2027x_set_dmamode(ap, dev); } @@ -485,8 +473,8 @@ static long pdc_read_counter(struct ata_host *host) counter = (bccrh << 15) | bccrl; - PDPRINTK("bccrh [%X] bccrl [%X]\n", bccrh, bccrl); - PDPRINTK("bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv); + dev_dbg(host->dev, "bccrh [%X] bccrl [%X]\n", bccrh, bccrl); + dev_dbg(host->dev, "bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv); /* * The 30-bit decreasing counter are read by 2 pieces. @@ -495,7 +483,7 @@ static long pdc_read_counter(struct ata_host *host) */ if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) { retry--; - PDPRINTK("rereading counter\n"); + dev_dbg(host->dev, "rereading counter\n"); goto retry; } @@ -520,20 +508,19 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b /* Sanity check */ if (unlikely(pll_clock_khz < 5000L || pll_clock_khz > 70000L)) { - printk(KERN_ERR DRV_NAME ": Invalid PLL input clock %ldkHz, give up!\n", pll_clock_khz); + dev_err(host->dev, "Invalid PLL input clock %ldkHz, give up!\n", + pll_clock_khz); return; } -#ifdef PDC_DEBUG - PDPRINTK("pout_required is %ld\n", pout_required); + dev_dbg(host->dev, "pout_required is %ld\n", pout_required); /* Show the current clock value of PLL control register * (maybe already configured by the firmware) */ pll_ctl = ioread16(mmio_base + PDC_PLL_CTL); - PDPRINTK("pll_ctl[%X]\n", pll_ctl); -#endif + dev_dbg(host->dev, "pll_ctl[%X]\n", pll_ctl); /* * Calculate the ratio of F, R and OD @@ -552,7 +539,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b R = 0x00; } else { /* Invalid ratio */ - printk(KERN_ERR DRV_NAME ": Invalid ratio %ld, give up!\n", ratio); + dev_err(host->dev, "Invalid ratio %ld, give up!\n", ratio); return; } @@ -560,15 +547,15 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b if (unlikely(F < 0 || F > 127)) { /* Invalid F */ - printk(KERN_ERR DRV_NAME ": F[%d] invalid!\n", F); + dev_err(host->dev, "F[%d] invalid!\n", F); return; } - PDPRINTK("F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio); + dev_dbg(host->dev, "F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio); pll_ctl = (R << 8) | F; - PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl); + dev_dbg(host->dev, "Writing pll_ctl[%X]\n", pll_ctl); iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL); ioread16(mmio_base + PDC_PLL_CTL); /* flush */ @@ -576,15 +563,13 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b /* Wait the PLL circuit to be stable */ msleep(30); -#ifdef PDC_DEBUG /* * Show the current clock value of PLL control register * (maybe configured by the firmware) */ pll_ctl = ioread16(mmio_base + PDC_PLL_CTL); - PDPRINTK("pll_ctl[%X]\n", pll_ctl); -#endif + dev_dbg(host->dev, "pll_ctl[%X]\n", pll_ctl); return; } @@ -605,7 +590,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) /* Start the test mode */ scr = ioread32(mmio_base + PDC_SYS_CTL); - PDPRINTK("scr[%X]\n", scr); + dev_dbg(host->dev, "scr[%X]\n", scr); iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL); ioread32(mmio_base + PDC_SYS_CTL); /* flush */ @@ -622,7 +607,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) /* Stop the test mode */ scr = ioread32(mmio_base + PDC_SYS_CTL); - PDPRINTK("scr[%X]\n", scr); + dev_dbg(host->dev, "scr[%X]\n", scr); iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL); ioread32(mmio_base + PDC_SYS_CTL); /* flush */ @@ -632,8 +617,8 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 * (100000000 / usec_elapsed); - PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count); - PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock); + dev_dbg(host->dev, "start[%ld] end[%ld] PLL input clock[%ld]HZ\n", + start_count, end_count, pll_clock); return pll_clock; }