From patchwork Mon Aug 16 01:44:51 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Damien Le Moal X-Patchwork-Id: 1516986 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-ide-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=wdc.com header.i=@wdc.com header.a=rsa-sha256 header.s=dkim.wdc.com header.b=j8b0rUhP; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4Gnxn4114Hz9sWS for ; Mon, 16 Aug 2021 11:45:12 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232236AbhHPBpl (ORCPT ); Sun, 15 Aug 2021 21:45:41 -0400 Received: from esa5.hgst.iphmx.com ([216.71.153.144]:37268 "EHLO esa5.hgst.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230397AbhHPBpf (ORCPT ); Sun, 15 Aug 2021 21:45:35 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=wdc.com; i=@wdc.com; q=dns/txt; s=dkim.wdc.com; t=1629078303; x=1660614303; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=K6cuMyEa9XM1/DRBQ8GMISegyu7UcWsI3qu8wFRMlZw=; b=j8b0rUhPfDRGlshASJp6njHIoTKkgz92KgTkzvg6o7QugGKYdJgWsfpj SeEBD6Ttwypc8g7R9Ey4cCfi4Zco6XBSnPBdFn/RPDzyEArCTAMj6OP61 z/VgG59AwYrkVmPqXHJEIGTpayexhtrVFIxVwVERJ4TkTaTI+hNxatYQK r1RxkVh9P4CeTLRg+IaP/sUSRaSmGFyxgB9ZM0EeRgNua+sJTOY80sss1 WBrxW181bLcgQettnganEfgmDLkvIALWVIjQuC+0aJMzRz2foc1u1pPb4 YIZjsVFP8MVGFn1j/QxWG5BLFAY4yxHjDvKKoimMqhwp/dtBstO9lSyTl g==; X-IronPort-AV: E=Sophos;i="5.84,324,1620662400"; d="scan'208";a="177326707" Received: from uls-op-cesaip02.wdc.com (HELO uls-op-cesaep02.wdc.com) ([199.255.45.15]) by ob1.hgst.iphmx.com with ESMTP; 16 Aug 2021 09:45:03 +0800 IronPort-SDR: SJqRcvBs/CKexzjD3G2gNVRpwOTND1QvXokqkO8SNTlJQ1HjdVMh8lX9ZbNb09q0ZI5bsnFb4c PAw4bh+ik8NNY4YraR2m8WfLYtlja8D4YinIzDfhAKN0lW5iSW9zDfqAcXFbngbX+7AErZPa2J fYT3sB7XK+hU7jkVJAGi4sEy8tSQDUItchysiXXBc6H1EuBD1vBnFKIDQe4PSg2y6GuPQELwlq fP9wlxSNBRcdKETyiZdVIqjZxYXQi7WN0Id2MxSpd2biqlAEXGUIrm5wryGju0pLra6WmX1HPC gszkCH82WFIOplcMnvzY+0aJ Received: from uls-op-cesaip02.wdc.com ([10.248.3.37]) by uls-op-cesaep02.wdc.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 15 Aug 2021 18:20:30 -0700 IronPort-SDR: KRbVl4iAPZD4UFvbug/yueQNZq8+JmXmGO9srPaDMHcopqMTZktbT5wLwzO1lsm+dqU5lMz+UY Snw6lgU95WsuVO8LwkcT3KFIzd4BjXpUcXavfpa+SfyMcdxKg9I7MyfQXz59sR04CAYtXzKgk8 lJ6x0wlyS2H8wwJFPLBM3box7TMW4wJCffNk7/QrNLcPJBmB9zUyHUVigCz0JrREaQN7CMfhhC ZbHC9oqbCb7dIrPdtfxcnVuZX65Sso6uNHcO8Z2P6fe1ypruTErpyozeHZVPZCLOjse2HzeTBV AN0= WDCIronportException: Internal Received: from washi.fujisawa.hgst.com ([10.149.53.254]) by uls-op-cesaip02.wdc.com with ESMTP; 15 Aug 2021 18:45:04 -0700 From: Damien Le Moal To: Jens Axboe , linux-ide@vger.kernel.org Cc: linux-block@vger.kernel.org Subject: [PATCH v7 06/11] libata: cleanup NCQ priority handling Date: Mon, 16 Aug 2021 10:44:51 +0900 Message-Id: <20210816014456.2191776-7-damien.lemoal@wdc.com> X-Mailer: git-send-email 2.31.1 In-Reply-To: <20210816014456.2191776-1-damien.lemoal@wdc.com> References: <20210816014456.2191776-1-damien.lemoal@wdc.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org The ata device flag ATA_DFLAG_NCQ_PRIO indicates if a device supports the NCQ Priority feature while the ATA_DFLAG_NCQ_PRIO_ENABLE device flag indicates if the feature is enabled. Enabling NCQ priority use is controlled by the user through the device sysfs attribute ncq_prio_enable. As a result, the ATA_DFLAG_NCQ_PRIO flag should not be cleared when ATA_DFLAG_NCQ_PRIO_ENABLE is not set as the device still supports the feature even after the user disables it. This leads to the following cleanups: - In ata_build_rw_tf(), set a command high priority bit based on the ATA_DFLAG_NCQ_PRIO_ENABLE flag, not on the ATA_DFLAG_NCQ flag. That is, set a command high priority only if the user enabled NCQ priority use. - In ata_dev_config_ncq_prio(), ATA_DFLAG_NCQ_PRIO should not be cleared if ATA_DFLAG_NCQ_PRIO_ENABLE is not set. If the device does not support NCQ priority, both ATA_DFLAG_NCQ_PRIO and ATA_DFLAG_NCQ_PRIO_ENABLE must be cleared. With the above ata_dev_config_ncq_prio() change, ATA_DFLAG_NCQ_PRIO flag is set on device scan and revalidation. There is no need to trigger a device revalidation in ata_ncq_prio_enable_store() when the user enables the use of NCQ priority. Remove the revalidation code from that funciton to simplify it. Also change the return value from -EIO to -EINVAL when a user tries to enable NCQ priority for a device that does not support this feature. While at it, also simplify ata_ncq_prio_enable_show(). Overall, there is no functional change introduced by this patch. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke --- drivers/ata/libata-core.c | 32 ++++++++++++++------------------ drivers/ata/libata-sata.c | 37 ++++++++++++------------------------- 2 files changed, 26 insertions(+), 43 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 660b450bc498..a845a2b8d899 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -712,11 +712,9 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, if (tf->flags & ATA_TFLAG_FUA) tf->device |= 1 << 7; - if (dev->flags & ATA_DFLAG_NCQ_PRIO) { - if (class == IOPRIO_CLASS_RT) - tf->hob_nsect |= ATA_PRIO_HIGH << - ATA_SHIFT_PRIO; - } + if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE && + class == IOPRIO_CLASS_RT) + tf->hob_nsect |= ATA_PRIO_HIGH << ATA_SHIFT_PRIO; } else if (dev->flags & ATA_DFLAG_LBA) { tf->flags |= ATA_TFLAG_LBA; @@ -2178,11 +2176,6 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev) struct ata_port *ap = dev->link->ap; unsigned int err_mask; - if (!(dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE)) { - dev->flags &= ~ATA_DFLAG_NCQ_PRIO; - return; - } - err_mask = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE, ATA_LOG_SATA_SETTINGS, @@ -2190,18 +2183,21 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev) 1); if (err_mask) { ata_dev_dbg(dev, - "failed to get Identify Device data, Emask 0x%x\n", + "failed to get SATA settings log, Emask 0x%x\n", err_mask); - return; + goto not_supported; } - if (ap->sector_buf[ATA_LOG_NCQ_PRIO_OFFSET] & BIT(3)) { - dev->flags |= ATA_DFLAG_NCQ_PRIO; - } else { - dev->flags &= ~ATA_DFLAG_NCQ_PRIO; - ata_dev_dbg(dev, "SATA page does not support priority\n"); - } + if (!(ap->sector_buf[ATA_LOG_NCQ_PRIO_OFFSET] & BIT(3))) + goto not_supported; + + dev->flags |= ATA_DFLAG_NCQ_PRIO; + + return; +not_supported: + dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE; + dev->flags &= ~ATA_DFLAG_NCQ_PRIO; } static int ata_dev_config_ncq(struct ata_device *dev, diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index 8adeab76dd38..dc397ebda089 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -839,23 +839,17 @@ static ssize_t ata_ncq_prio_enable_show(struct device *device, char *buf) { struct scsi_device *sdev = to_scsi_device(device); - struct ata_port *ap; + struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev; bool ncq_prio_enable; int rc = 0; - ap = ata_shost_to_port(sdev->host); - spin_lock_irq(ap->lock); dev = ata_scsi_find_dev(ap, sdev); - if (!dev) { + if (!dev) rc = -ENODEV; - goto unlock; - } - - ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE; - -unlock: + else + ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE; spin_unlock_irq(ap->lock); return rc ? rc : snprintf(buf, 20, "%u\n", ncq_prio_enable); @@ -869,7 +863,7 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device, struct ata_port *ap; struct ata_device *dev; long int input; - int rc; + int rc = 0; rc = kstrtol(buf, 10, &input); if (rc) @@ -883,27 +877,20 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device, return -ENODEV; spin_lock_irq(ap->lock); + + if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) { + rc = -EINVAL; + goto unlock; + } + if (input) dev->flags |= ATA_DFLAG_NCQ_PRIO_ENABLE; else dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE; - dev->link->eh_info.action |= ATA_EH_REVALIDATE; - dev->link->eh_info.flags |= ATA_EHI_QUIET; - ata_port_schedule_eh(ap); +unlock: spin_unlock_irq(ap->lock); - ata_port_wait_eh(ap); - - if (input) { - spin_lock_irq(ap->lock); - if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) { - dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE; - rc = -EIO; - } - spin_unlock_irq(ap->lock); - } - return rc ? rc : len; }