Message ID | 20210614072539.3307-1-public_timo.s@silentcreek.de |
---|---|
State | New |
Headers | show |
Series | [v2,RESEND] ata: ahci_sunxi: Disable DIPM | expand |
On 6/14/21 1:25 AM, Timo Sigurdsson wrote: > DIPM is unsupported or broken on sunxi. Trying to enable the power > management policy med_power_with_dipm on an Allwinner A20 SoC based board > leads to immediate I/O errors and the attached SATA disk disappears from > the /dev filesystem. A reset (power cycle) is required to make the SATA > controller or disk work again. The A10 and A20 SoC data sheets and manuals > don't mention DIPM at all [1], so it's fair to assume that it's simply not > supported. But even if it was, it should be considered broken and best be > disabled in the ahci_sunxi driver. Applied, thanks.
diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c index cb69b737cb49..56b695136977 100644 --- a/drivers/ata/ahci_sunxi.c +++ b/drivers/ata/ahci_sunxi.c @@ -200,7 +200,7 @@ static void ahci_sunxi_start_engine(struct ata_port *ap) } static const struct ata_port_info ahci_sunxi_port_info = { - .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, + .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ | ATA_FLAG_NO_DIPM, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_platform_ops,