@@ -16,6 +16,7 @@
*/
#define DRV_NAME "ide-tape"
+#define PFX DRV_NAME ": "
#define IDETAPE_VERSION "1.20"
@@ -356,8 +357,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
if (uptodate)
idetape_analyze_error(drive);
else
- printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
- "itself - Aborting request!\n");
+ printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
+ "Aborting request!\n");
} else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
unsigned int blocks =
(blk_rq_bytes(rq) - rq->resid_len) / tape->blk_size;
@@ -472,9 +473,9 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
if (!(pc->c[0] == TEST_UNIT_READY &&
tape->sense_key == 2 && tape->asc == 4 &&
(tape->ascq == 1 || tape->ascq == 8))) {
- printk(KERN_ERR "ide-tape: %s: I/O error, "
- "pc = %2x, key = %2x, "
- "asc = %2x, ascq = %2x\n",
+ printk(KERN_ERR PFX "%s: I/O error, pc = %2x, "
+ "key = %2x, asc = %2x, "
+ "ascq = %2x\n",
tape->name, pc->c[0],
tape->sense_key, tape->asc,
tape->ascq);
@@ -535,8 +536,8 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
if (stat & ATA_ERR) {
/* Error detected */
if (pc->c[0] != TEST_UNIT_READY)
- printk(KERN_ERR "ide-tape: %s: I/O error, ",
- tape->name);
+ printk(KERN_ERR PFX "%s: I/O error, ",
+ tape->name);
/* Retry operation */
ide_retry_pc(drive);
return ide_stopped;
@@ -596,8 +597,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
if (postponed_rq != NULL)
if (rq != postponed_rq) {
- printk(KERN_ERR "ide-tape: ide-tape.c bug - "
- "Two DSC requests were queued\n");
+ printk(KERN_ERR PFX "%s: BUG: Two DSC requests "
+ "queued!\n",
+ tape->name);
drive->failed_pc = NULL;
rq->errors = 0;
ide_complete_rq(drive, 0, blk_rq_bytes(rq));
@@ -628,8 +630,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
tape->dsc_poll_freq = tape->best_dsc_rw_freq;
tape->dsc_timeout = jiffies + IDETAPE_DSC_RW_TIMEOUT;
} else if (time_after(jiffies, tape->dsc_timeout)) {
- printk(KERN_ERR "ide-tape: %s: DSC timeout\n",
- tape->name);
+ printk(KERN_ERR PFX "%s: DSC timeout\n", tape->name);
+
if (rq->cmd[13] & REQ_IDETAPE_PC2) {
idetape_media_access_finished(drive);
return ide_stopped;
@@ -762,8 +764,8 @@ static int ide_tape_read_position(ide_drive_t *drive)
(buf[0] & 0x40) ? "Yes" : "No");
if (buf[0] & 0x4) {
- printk(KERN_INFO "ide-tape: Block location is unknown"
- "to the tape\n");
+ printk(KERN_INFO PFX "%s: Block location unknown\n",
+ tape->name);
clear_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
&drive->atapi_flags);
return -1;
@@ -849,8 +851,8 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
position = ide_tape_read_position(drive);
seek = position > 0 ? position : 0;
if (idetape_position_tape(drive, seek, 0, 0)) {
- printk(KERN_INFO "ide-tape: %s: position_tape failed in"
- " %s\n", tape->name, __func__);
+ printk(KERN_INFO PFX "position_tape failed in %s\n",
+ tape->name);
return;
}
}
@@ -939,8 +941,8 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
idetape_tape_t *tape = drive->driver_data;
if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
- printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer"
- " but we are not writing.\n");
+ printk(KERN_ERR PFX "BUG: Trying to empty merge buffer"
+ " but we are not writing.\n");
return;
}
if (tape->buf) {
@@ -972,7 +974,7 @@ static int idetape_init_rw(ide_drive_t *drive, int dir)
}
if (tape->buf || tape->valid) {
- printk(KERN_ERR "ide-tape: valid should be 0 now\n");
+ printk(KERN_ERR PFX "valid should be 0 now\n");
tape->valid = 0;
}
@@ -1117,7 +1119,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
count = (MTBSFM == mt_op ? 1 : -1);
return idetape_space_over_filemarks(drive, MTFSF, count);
default:
- printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
+ printk(KERN_ERR PFX "MTIO operation %d not supported\n",
mt_op);
return -EIO;
}
@@ -1246,7 +1248,7 @@ static int idetape_write_filemark(ide_drive_t *drive)
/* Write a filemark */
idetape_create_write_filemark_cmd(drive, &pc, 1);
if (ide_queue_pc_tail(drive, tape->disk, &pc, NULL, 0)) {
- printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
+ printk(KERN_ERR PFX "Couldn't write a filemark\n");
return -EIO;
}
return 0;
@@ -1370,8 +1372,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
tape->door_locked = DOOR_UNLOCKED;
return 0;
default:
- printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
- mt_op);
+ printk(KERN_ERR PFX "MTIO operation %d not supported\n", mt_op);
return -EIO;
}
}
@@ -1448,10 +1449,10 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) {
- printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
+ printk(KERN_ERR PFX "Can't get block descriptor\n");
if (tape->blk_size == 0) {
- printk(KERN_WARNING "ide-tape: Cannot deal with zero "
- "block size, assuming 32k\n");
+ printk(KERN_WARNING PFX "Cannot deal with zero block "
+ "size, assuming 32k\n");
tape->blk_size = 32768;
}
return;
@@ -1500,7 +1501,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
retval = idetape_wait_ready(drive, 60 * HZ);
if (retval) {
clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
- printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
+ printk(KERN_ERR PFX "%s: drive not ready\n", tape->name);
goto out_put_tape;
}
@@ -1603,8 +1604,8 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
idetape_create_inquiry_cmd(&pc);
if (ide_queue_pc_tail(drive, tape->disk, &pc, pc_buf, pc.req_xfer)) {
- printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
- tape->name);
+ printk(KERN_ERR PFX "%s: can't get INQUIRY results\n",
+ tape->name);
return;
}
memcpy(vendor_id, &pc_buf[8], 8);
@@ -1615,8 +1616,8 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
ide_fixstring(product_id, 16, 0);
ide_fixstring(fw_rev, 4, 0);
- printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n",
- drive->name, tape->name, vendor_id, product_id, fw_rev);
+ printk(KERN_INFO PFX "%s <-> %s: %.8s %.16s rev %.4s\n",
+ drive->name, tape->name, vendor_id, product_id, fw_rev);
}
/*
@@ -1632,8 +1633,8 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) {
- printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
- " some default values\n");
+ printk(KERN_ERR PFX "Can't get tape parameters - assuming"
+ " some default values\n");
tape->blk_size = 512;
put_unaligned(52, (u16 *)&tape->caps[12]);
put_unaligned(540, (u16 *)&tape->caps[14]);
@@ -1652,13 +1653,13 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
*(u16 *)&caps[16] = be16_to_cpup((__be16 *)&caps[16]);
if (!speed) {
- printk(KERN_INFO "ide-tape: %s: invalid tape speed "
- "(assuming 650KB/sec)\n", drive->name);
+ printk(KERN_INFO PFX "%s: invalid tape speed "
+ "(assuming 650KB/sec)\n", drive->name);
*(u16 *)&caps[14] = 650;
}
if (!max_speed) {
- printk(KERN_INFO "ide-tape: %s: invalid max_speed "
- "(assuming 650KB/sec)\n", drive->name);
+ printk(KERN_INFO PFX "%s: invalid max_speed "
+ "(assuming 650KB/sec)\n", drive->name);
*(u16 *)&caps[8] = 650;
}
@@ -1750,8 +1751,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
- printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
- tape->name);
+ printk(KERN_INFO PFX "%s: disabling DSC overlap\n", tape->name);
drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
}
@@ -1771,7 +1771,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
tape->user_bs_factor = 1;
tape->buffer_size = *ctl * tape->blk_size;
while (tape->buffer_size > 0xffff) {
- printk(KERN_NOTICE "ide-tape: decreasing stage size\n");
+ printk(KERN_NOTICE PFX "decreasing stage size\n");
*ctl /= 2;
tape->buffer_size = *ctl * tape->blk_size;
}
@@ -1788,7 +1788,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
*/
tape->best_dsc_rw_freq = clamp_t(unsigned long, t, IDETAPE_DSC_RW_MIN,
IDETAPE_DSC_RW_MAX);
- printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
+ printk(KERN_INFO PFX "%s <-> %s: %dKBps, %d*%dkB buffer, "
"%lums tDSC%s\n",
drive->name, tape->name, *(u16 *)&tape->caps[14],
(*(u16 *)&tape->caps[16] * 512) / tape->buffer_size,
@@ -1866,7 +1866,7 @@ static int ide_tape_probe(ide_drive_t *);
static struct ide_driver idetape_driver = {
.gen_driver = {
.owner = THIS_MODULE,
- .name = "ide-tape",
+ .name = DRV_NAME,
.bus = &ide_bus_type,
},
.probe = ide_tape_probe,
@@ -1939,14 +1939,14 @@ static int ide_tape_probe(ide_drive_t *drive)
if ((drive->dev_flags & IDE_DFLAG_ID_READ) &&
ide_check_atapi_device(drive, DRV_NAME) == 0) {
- printk(KERN_ERR "ide-tape: %s: not supported by this version of"
- " the driver\n", drive->name);
+ printk(KERN_ERR PFX "%s: not supported by this version of"
+ " the driver\n", drive->name);
goto failed;
}
tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL);
if (tape == NULL) {
- printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n",
- drive->name);
+ printk(KERN_ERR PFX "%s: Can't allocate a tape struct\n",
+ drive->name);
goto failed;
}
@@ -2011,14 +2011,13 @@ static int __init idetape_init(void)
idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape");
if (IS_ERR(idetape_sysfs_class)) {
idetape_sysfs_class = NULL;
- printk(KERN_ERR "Unable to create sysfs class for ide tapes\n");
+ printk(KERN_ERR PFX "Unable to create sysfs class\n");
error = -EBUSY;
goto out;
}
if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) {
- printk(KERN_ERR "ide-tape: Failed to register chrdev"
- " interface\n");
+ printk(KERN_ERR PFX "Failed to register chrdev interface\n");
error = -EBUSY;
goto out_free_class;
}
There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> --- drivers/ide/ide-tape.c | 95 ++++++++++++++++++++++++------------------------ 1 files changed, 47 insertions(+), 48 deletions(-)