diff mbox

[7/9] I2C: mv64xxx: remove I2C_M_NOSTART code

Message ID E1Ud4vH-0004Jz-F6@rmk-PC.arm.linux.org.uk
State Accepted
Headers show

Commit Message

Russell King May 16, 2013, 8:37 p.m. UTC 
As this driver does not advertise protocol mangling support
(I2C_FUNC_PROTOCOL_MANGLING is not set), having code to act on
I2C_M_NOSTART is illogical, and in any case isn't supportable on
anything but the first message - which makes no sense.  Remove
the I2C_M_NOSTART code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-mv64xxx.c |   26 +++++---------------------
 1 files changed, 5 insertions(+), 21 deletions(-)

Comments

Mark Brown May 22, 2013, 7:05 p.m. UTC | #1 
On Thu, May 16, 2013 at 09:37:11PM +0100, Russell King wrote:

> As this driver does not advertise protocol mangling support
> (I2C_FUNC_PROTOCOL_MANGLING is not set), having code to act on
> I2C_M_NOSTART is illogical, and in any case isn't supportable on
> anything but the first message - which makes no sense.  Remove
> the I2C_M_NOSTART code.

There is I2C_FUNC_NOSTART, though if it's only possible to use it on the
first message that is pretty much useless as you say.
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index a82ab25..d160f8c 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -419,28 +419,12 @@  mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
 	spin_lock_irqsave(&drv_data->lock, flags);
 	mv64xxx_i2c_prepare_for_io(drv_data, msg);
 
-	if (unlikely(msg->flags & I2C_M_NOSTART)) { /* Skip start/addr phases */
-		if (drv_data->msg->flags & I2C_M_RD) {
-			/* No action to do, wait for slave to send a byte */
-			drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
-		} else {
-			drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
-			drv_data->bytes_left--;
-		}
+	if (is_first) {
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
 	} else {
-		if (is_first) {
-			drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
-		} else {
-			drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
-		}
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1;
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
 	}
 
 	drv_data->send_stop = is_last;