@@ -716,14 +716,15 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
if (time_left == 0) {
/*
* In a multi-master setup, if a timeout occurs, attempt
- * recovery. But if the bus is idle, we still need to reset the
- * i2c controller to clear the remaining interrupts.
+ * recovery device. But if the bus is idle,
+ * we still need to reset the i2c controller to clear
+ * the remaining interrupts or reset device abnormal condition.
*/
- if (bus->multi_master &&
- (readl(bus->base + ASPEED_I2C_CMD_REG) &
- ASPEED_I2CD_BUS_BUSY_STS))
- aspeed_i2c_recover_bus(bus);
- else
+ if ((readl(bus->base + ASPEED_I2C_CMD_REG) &
+ ASPEED_I2CD_BUS_BUSY_STS)){
+ if (bus->multi_master)
+ aspeed_i2c_recover_bus(bus);
+ } else
aspeed_i2c_reset(bus);
/*
In the original code, the device reset would not be triggered when the driver is set to multi-master and bus is free. It needs to be considered with multi-master condition. Fixes: <f327c686d3ba> ("i2c: aspeed: Reset the i2c controller when timeout occurs") Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com> --- drivers/i2c/busses/i2c-aspeed.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)