diff mbox series

[2/2] eeprom: at24: add ST M24256E Additional Write lockable page support

Message ID 20241017184152.128395-2-marex@denx.de
State New
Headers show
Series [1/2] dt-bindings: at24: add ST M24256E Additional Write lockable page support | expand

Commit Message

Marek Vasut Oct. 17, 2024, 6:41 p.m. UTC 
The ST M24256E behaves as a regular M24C256, except for the E variant
which uses up another I2C address for Additional Write lockable page.
This page is 64 Bytes long and can contain additional data. Add entry
for it, so users can describe that page in DT. Note that users still
have to describe the main M24C256 area separately as that is on separate
I2C address from this page.

Unlike M24C32-D and M24C64-D, this part is specifically ST and does not
have any comparable M24* counterparts from other vendors, hence the st,
vendor prefix. Furthermore, the part name is M24256E without C between
the 24 and 256, this is not a typo. Finally, there is M24C256-D part,
which does contain 32 Bytes long Additional Write lockable page, which
is a different part and not supported by this patch.

Datasheet: https://www.st.com/resource/en/datasheet/m24256e-f.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-i2c@vger.kernel.org
---
 drivers/misc/eeprom/at24.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index ca872e3465ed9..0a7c7f29406c7 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -207,6 +207,8 @@  AT24_CHIP_DATA(at24_data_24cs64, 16,
 	AT24_FLAG_ADDR16 | AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
 AT24_CHIP_DATA(at24_data_24c128, 131072 / 8, AT24_FLAG_ADDR16);
 AT24_CHIP_DATA(at24_data_24c256, 262144 / 8, AT24_FLAG_ADDR16);
+/* M24256E Additional Write lockable page (M24256E-F order codes) */
+AT24_CHIP_DATA(at24_data_24256e_wlp, 64, AT24_FLAG_ADDR16);
 AT24_CHIP_DATA(at24_data_24c512, 524288 / 8, AT24_FLAG_ADDR16);
 AT24_CHIP_DATA(at24_data_24c1024, 1048576 / 8, AT24_FLAG_ADDR16);
 AT24_CHIP_DATA_BS(at24_data_24c1025, 1048576 / 8, AT24_FLAG_ADDR16, 2);
@@ -240,6 +242,7 @@  static const struct i2c_device_id at24_ids[] = {
 	{ "24cs64",	(kernel_ulong_t)&at24_data_24cs64 },
 	{ "24c128",	(kernel_ulong_t)&at24_data_24c128 },
 	{ "24c256",	(kernel_ulong_t)&at24_data_24c256 },
+	{ "24256e-wl",	(kernel_ulong_t)&at24_data_24256e_wlp },
 	{ "24c512",	(kernel_ulong_t)&at24_data_24c512 },
 	{ "24c1024",	(kernel_ulong_t)&at24_data_24c1024 },
 	{ "24c1025",	(kernel_ulong_t)&at24_data_24c1025 },
@@ -278,6 +281,7 @@  static const struct of_device_id __maybe_unused at24_of_match[] = {
 	{ .compatible = "atmel,24c2048",	.data = &at24_data_24c2048 },
 	{ .compatible = "microchip,24aa025e48",	.data = &at24_data_24aa025e48 },
 	{ .compatible = "microchip,24aa025e64",	.data = &at24_data_24aa025e64 },
+	{ .compatible = "st,24256e-wl",		.data = &at24_data_24256e_wlp },
 	{ /* END OF LIST */ },
 };
 MODULE_DEVICE_TABLE(of, at24_of_match);