| Message ID | 20240904123607.3407364-20-lizetao1@huawei.com |
|---|---|
| State | Handled Elsewhere |
| Delegated to: | Andi Shyti |
| Headers | show |
| Series | HID: convert to devm_hid_hw_start_and_open() | expand |
On 9/4/24 05:36, Li Zetao wrote: > Currently, the nzxt-smart2 module needs to maintain hid resources > by itself. Consider using devm_hid_hw_start_and_open helper to ensure For all patches: s/Consider using/Use/ > that hid resources are consistent with the device life cycle, and release > hid resources before device is released. At the same time, it can avoid > the goto-release encoding, drop the out_hw_close and out_hw_stop > lables, and directly return the error code when an error occurs. > > Signed-off-by: Li Zetao <lizetao1@huawei.com> > --- > drivers/hwmon/nzxt-smart2.c | 22 +++------------------- > 1 file changed, 3 insertions(+), 19 deletions(-) > > diff --git a/drivers/hwmon/nzxt-smart2.c b/drivers/hwmon/nzxt-smart2.c > index df6fa72a6b59..b5721a42c0d3 100644 > --- a/drivers/hwmon/nzxt-smart2.c > +++ b/drivers/hwmon/nzxt-smart2.c > @@ -750,14 +750,10 @@ static int nzxt_smart2_hid_probe(struct hid_device *hdev, > if (ret) > return ret; > > - ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); > + ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW); > if (ret) > return ret; > > - ret = hid_hw_open(hdev); > - if (ret) > - goto out_hw_stop; > - > hid_device_io_start(hdev); > > init_device(drvdata, UPDATE_INTERVAL_DEFAULT_MS); > @@ -765,19 +761,10 @@ static int nzxt_smart2_hid_probe(struct hid_device *hdev, > drvdata->hwmon = > hwmon_device_register_with_info(&hdev->dev, "nzxtsmart2", drvdata, > &nzxt_smart2_chip_info, NULL); > - if (IS_ERR(drvdata->hwmon)) { > - ret = PTR_ERR(drvdata->hwmon); > - goto out_hw_close; > - } > + if (IS_ERR(drvdata->hwmon)) > + return PTR_ERR(drvdata->hwmon); > > return 0; return PTR_ERR_OR_ZERO(drvdata->hwmon); Also, this can be optimized further. struct device *hwmon; // and drop from struct drvdata ... hwmon = devm_hwmon_device_register_with_info(&hdev->dev, "nzxtsmart2", drvdata, &nzxt_smart2_chip_info, NULL); return PTR_ERR_OR_ZERO(hwmon); and drop the remove function entirely. Thanks, Guenter > - > -out_hw_close: > - hid_hw_close(hdev); > - > -out_hw_stop: > - hid_hw_stop(hdev); > - return ret; > } > > static void nzxt_smart2_hid_remove(struct hid_device *hdev) > @@ -785,9 +772,6 @@ static void nzxt_smart2_hid_remove(struct hid_device *hdev) > struct drvdata *drvdata = hid_get_drvdata(hdev); > > hwmon_device_unregister(drvdata->hwmon); > - > - hid_hw_close(hdev); > - hid_hw_stop(hdev); > } > > static const struct hid_device_id nzxt_smart2_hid_id_table[] = {
Hi, 在 2024/9/4 22:14, Guenter Roeck 写道: > On 9/4/24 05:36, Li Zetao wrote: >> Currently, the nzxt-smart2 module needs to maintain hid resources >> by itself. Consider using devm_hid_hw_start_and_open helper to ensure > > For all patches: > > s/Consider using/Use/ ok > >> that hid resources are consistent with the device life cycle, and release >> hid resources before device is released. At the same time, it can avoid >> the goto-release encoding, drop the out_hw_close and out_hw_stop >> lables, and directly return the error code when an error occurs. >> >> Signed-off-by: Li Zetao <lizetao1@huawei.com> >> --- >> drivers/hwmon/nzxt-smart2.c | 22 +++------------------- >> 1 file changed, 3 insertions(+), 19 deletions(-) >> >> diff --git a/drivers/hwmon/nzxt-smart2.c b/drivers/hwmon/nzxt-smart2.c >> index df6fa72a6b59..b5721a42c0d3 100644 >> --- a/drivers/hwmon/nzxt-smart2.c >> +++ b/drivers/hwmon/nzxt-smart2.c >> @@ -750,14 +750,10 @@ static int nzxt_smart2_hid_probe(struct >> hid_device *hdev, >> if (ret) >> return ret; >> - ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); >> + ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW); >> if (ret) >> return ret; >> - ret = hid_hw_open(hdev); >> - if (ret) >> - goto out_hw_stop; >> - >> hid_device_io_start(hdev); >> init_device(drvdata, UPDATE_INTERVAL_DEFAULT_MS); >> @@ -765,19 +761,10 @@ static int nzxt_smart2_hid_probe(struct >> hid_device *hdev, >> drvdata->hwmon = >> hwmon_device_register_with_info(&hdev->dev, "nzxtsmart2", >> drvdata, >> &nzxt_smart2_chip_info, NULL); >> - if (IS_ERR(drvdata->hwmon)) { >> - ret = PTR_ERR(drvdata->hwmon); >> - goto out_hw_close; >> - } >> + if (IS_ERR(drvdata->hwmon)) >> + return PTR_ERR(drvdata->hwmon); >> return 0; > > return PTR_ERR_OR_ZERO(drvdata->hwmon); > > Also, this can be optimized further. > > struct device *hwmon; // and drop from struct drvdata > ... > hwmon = devm_hwmon_device_register_with_info(&hdev->dev, > "nzxtsmart2", drvdata, > &nzxt_smart2_chip_info, NULL); > > return PTR_ERR_OR_ZERO(hwmon); > > and drop the remove function entirely. Benjamin mentioned that there are unsafe scenarios in hid_hw_close_and_stop, and it is necessary to ensure that the driver can not use manual kzalloc/kfree. So, to be extra safe, I would delete .remove in v2. > > Thanks, > Guenter > >> - >> -out_hw_close: >> - hid_hw_close(hdev); >> - >> -out_hw_stop: >> - hid_hw_stop(hdev); >> - return ret; >> } >> static void nzxt_smart2_hid_remove(struct hid_device *hdev) >> @@ -785,9 +772,6 @@ static void nzxt_smart2_hid_remove(struct >> hid_device *hdev) >> struct drvdata *drvdata = hid_get_drvdata(hdev); >> hwmon_device_unregister(drvdata->hwmon); >> - >> - hid_hw_close(hdev); >> - hid_hw_stop(hdev); >> } >> static const struct hid_device_id nzxt_smart2_hid_id_table[] = { >
diff --git a/drivers/hwmon/nzxt-smart2.c b/drivers/hwmon/nzxt-smart2.c index df6fa72a6b59..b5721a42c0d3 100644 --- a/drivers/hwmon/nzxt-smart2.c +++ b/drivers/hwmon/nzxt-smart2.c @@ -750,14 +750,10 @@ static int nzxt_smart2_hid_probe(struct hid_device *hdev, if (ret) return ret; - ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); + ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW); if (ret) return ret; - ret = hid_hw_open(hdev); - if (ret) - goto out_hw_stop; - hid_device_io_start(hdev); init_device(drvdata, UPDATE_INTERVAL_DEFAULT_MS); @@ -765,19 +761,10 @@ static int nzxt_smart2_hid_probe(struct hid_device *hdev, drvdata->hwmon = hwmon_device_register_with_info(&hdev->dev, "nzxtsmart2", drvdata, &nzxt_smart2_chip_info, NULL); - if (IS_ERR(drvdata->hwmon)) { - ret = PTR_ERR(drvdata->hwmon); - goto out_hw_close; - } + if (IS_ERR(drvdata->hwmon)) + return PTR_ERR(drvdata->hwmon); return 0; - -out_hw_close: - hid_hw_close(hdev); - -out_hw_stop: - hid_hw_stop(hdev); - return ret; } static void nzxt_smart2_hid_remove(struct hid_device *hdev) @@ -785,9 +772,6 @@ static void nzxt_smart2_hid_remove(struct hid_device *hdev) struct drvdata *drvdata = hid_get_drvdata(hdev); hwmon_device_unregister(drvdata->hwmon); - - hid_hw_close(hdev); - hid_hw_stop(hdev); } static const struct hid_device_id nzxt_smart2_hid_id_table[] = {
Currently, the nzxt-smart2 module needs to maintain hid resources by itself. Consider using devm_hid_hw_start_and_open helper to ensure that hid resources are consistent with the device life cycle, and release hid resources before device is released. At the same time, it can avoid the goto-release encoding, drop the out_hw_close and out_hw_stop lables, and directly return the error code when an error occurs. Signed-off-by: Li Zetao <lizetao1@huawei.com> --- drivers/hwmon/nzxt-smart2.c | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-)