diff mbox series

[v3,1/4] i2c: imx: only poll for bus busy in multi master mode

Message ID 20240902074330.6349-2-eichest@gmail.com
State Changes Requested
Delegated to: Andi Shyti
Headers show
Series i2c: imx: prevent rescheduling in non-dma mode | expand

Commit Message

Stefan Eichenberger Sept. 2, 2024, 7:42 a.m. UTC 
From: Stefan Eichenberger <stefan.eichenberger@toradex.com>

According to the i.MX8M Mini reference manual chapter "16.1.4.2
Generation of Start" it is only necessary to poll for bus busy and
arbitration lost in multi master mode. This helps to avoid rescheduling
while the i2c bus is busy and avoids SMBus devices to timeout.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/i2c/busses/i2c-imx.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 3842e527116b7..1add946e3bc20 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -216,6 +216,8 @@  struct imx_i2c_struct {
 	struct i2c_client	*slave;
 	enum i2c_slave_event last_slave_event;
 
+	bool			multi_master;
+
 	/* For checking slave events. */
 	spinlock_t     slave_lock;
 	struct hrtimer slave_timer;
@@ -481,6 +483,9 @@  static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool a
 	unsigned long orig_jiffies = jiffies;
 	unsigned int temp;
 
+	if (!i2c_imx->multi_master)
+		return 0;
+
 	while (1) {
 		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
 
@@ -540,8 +545,8 @@  static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx, bool atomic)
 		return -ETIMEDOUT;
 	}
 
-	/* check for arbitration lost */
-	if (i2c_imx->i2csr & I2SR_IAL) {
+	/* In multi-master mode check for arbitration lost */
+	if (i2c_imx->multi_master && (i2c_imx->i2csr & I2SR_IAL)) {
 		dev_dbg(&i2c_imx->adapter.dev, "<%s> Arbitration lost\n", __func__);
 		i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
 
@@ -1468,6 +1473,8 @@  static int i2c_imx_probe(struct platform_device *pdev)
 		goto rpm_disable;
 	}
 
+	i2c_imx->multi_master = of_property_read_bool(pdev->dev.of_node, "multi-master");
+
 	/* Set up clock divider */
 	i2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ;
 	ret = of_property_read_u32(pdev->dev.of_node,