diff mbox series

[v2,11/60] i2c: davinci: reword according to newest specification

Message ID 20240706112116.24543-12-wsa+renesas@sang-engineering.com
State Accepted
Delegated to: Andi Shyti
Headers show
Series i2c: reword first drivers according to newest specification | expand

Commit Message

Wolfram Sang July 6, 2024, 11:20 a.m. UTC 
Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
specifications and replace "master/slave" with more appropriate terms.
Remove and reword comments while here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/i2c/busses/i2c-davinci.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

Comments

Andi Shyti July 10, 2024, 8:04 a.m. UTC | #1 
Hi Wolfram,

On Sat, Jul 06, 2024 at 01:20:11PM GMT, Wolfram Sang wrote:
> Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
> specifications and replace "master/slave" with more appropriate terms.
> Remove and reword comments while here.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>

Thanks,
Andi
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 7ae611120cfa..c4fb5e9ab506 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -263,7 +263,7 @@  static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 	/* compute clock dividers */
 	i2c_davinci_calc_clk_dividers(dev);
 
-	/* Respond at reserved "SMBus Host" slave address" (and zero);
+	/* Respond at reserved "SMBus Host" target address" (and zero);
 	 * we seem to have no option to not respond...
 	 */
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, DAVINCI_I2C_OWN_ADDRESS);
@@ -407,8 +407,8 @@  static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev)
 }
 
 /*
- * Low level master read/write transaction. This function is called
- * from i2c_davinci_xfer.
+ * Low level read/write transaction. This function is called from
+ * i2c_davinci_xfer.
  */
 static int
 i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
@@ -428,7 +428,7 @@  i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	if (pdata->bus_delay)
 		udelay(pdata->bus_delay);
 
-	/* set the slave address */
+	/* set the target address */
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr);
 
 	dev->buf = msg->buf;
@@ -440,10 +440,9 @@  i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	reinit_completion(&dev->cmd_complete);
 	dev->cmd_err = 0;
 
-	/* Take I2C out of reset and configure it as master */
+	/* Take I2C out of reset and configure it as controller */
 	flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST;
 
-	/* if the slave address is ten bit address, enable XA bit */
 	if (msg->flags & I2C_M_TEN)
 		flag |= DAVINCI_I2C_MDR_XA;
 	if (!(msg->flags & I2C_M_RD))
@@ -687,7 +686,7 @@  static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 			break;
 
 		case DAVINCI_I2C_IVR_AAS:
-			dev_dbg(dev->dev, "Address as slave interrupt\n");
+			dev_dbg(dev->dev, "Address as target interrupt\n");
 			break;
 
 		default:
@@ -744,8 +743,8 @@  static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
 #endif
 
 static const struct i2c_algorithm i2c_davinci_algo = {
-	.master_xfer	= i2c_davinci_xfer,
-	.functionality	= i2c_davinci_func,
+	.xfer = i2c_davinci_xfer,
+	.functionality = i2c_davinci_func,
 };
 
 static const struct of_device_id davinci_i2c_of_match[] = {