[v3,40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies

Message ID	20240516181907.3468796-41-eajames@linux.ibm.com
State	Not Applicable
Headers	show Return-Path: <linux-i2c+bounces-3543-incoming=patchwork.ozlabs.org@vger.kernel.org> From: Eddie James <eajames@linux.ibm.com> To: linux-fsi@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, linux-spi@vger.kernel.org, broonie@kernel.org, andi.shyti@kernel.org, joel@jms.id.au, alistair@popple.id.au, jk@ozlabs.org, andrew@codeconstruct.com.au, linux-aspeed@lists.ozlabs.org, eajames@linux.ibm.com Subject: [PATCH v3 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies Date: Thu, 16 May 2024 13:19:07 -0500 Message-Id: <20240516181907.3468796-41-eajames@linux.ibm.com> In-Reply-To: <20240516181907.3468796-1-eajames@linux.ibm.com> References: <20240516181907.3468796-1-eajames@linux.ibm.com> Precedence: bulk MIME-Version: 1.0 Content-Transfer-Encoding: 8bit
Series	fsi: Add interrupt support \| expand [v3,00/40] fsi: Add interrupt support [v3,01/40] fsi: hub: Set master index to link number plus one [v3,02/40] fsi: Move slave definitions to fsi-slave.h [v3,03/40] fsi: Fix slave addressing after break command [v3,04/40] fsi: Use a defined value for default echo delay [v3,05/40] fsi: Calculate local bus clock frequency [v3,06/40] fsi: core: Improve master read/write/error traces [v3,07/40] fsi: core: Add slave error trace [v3,08/40] fsi: core: Reset errors instead of clearing interrupts [v3,09/40] fsi: aspeed: Add AST2700 support [v3,10/40] fsi: core: Add slave spinlock [v3,11/40] fsi: core: Allow cfam device type aliases [v3,12/40] fsi: core: Add common regmap master functions [v3,13/40] fsi: core: Disable relative addressing during scan [v3,14/40] fsi: hub: Use common initialization and link enable [v3,15/40] fsi: aspeed: Use common initialization and link enable [v3,16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove [v3,17/40] fsi: aspeed: Refactor trace functions [v3,18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers [v3,19/40] fsi: aspeed: Only read result register for successful read [v3,20/40] fsi: aspeed: Switch to spinlock [v3,21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset [v3,22/40] fsi: aspeed: Use common master error handler [v3,23/40] fsi: core: Add interrupt support [v3,24/40] fsi: aspeed: Add interrupt support [v3,25/40] fsi: hub: Add interrupt support [v3,26/40] i2c: fsi: Calculate clock divider from local bus frequency [v3,27/40] i2c: fsi: Improve formatting [v3,28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer [v3,29/40] i2c: fsi: Remove list structure of ports [v3,30/40] i2c: fsi: Define a function to check status error bits [v3,31/40] i2c: fsi: Add boolean for skip stop command on abort [v3,32/40] i2c: fsi: Add interrupt support [v3,33/40] fsi: hub master: Reset hub master after errors [v3,34/40] fsi: core: Add master register read-only sysfs [v3,35/40] fsi: core: Add slave register read-only sysfs [v3,36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip [v3,37/40] fsi: core: Add different types of CFAM [v3,38/40] spi: fsi: Calculate clock divider from local bus frequency [v3,39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency [v3,40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies

Message ID

20240516181907.3468796-41-eajames@linux.ibm.com

State

Not Applicable

Headers

From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
        linux-spi@vger.kernel.org, broonie@kernel.org, andi.shyti@kernel.org,
        joel@jms.id.au, alistair@popple.id.au, jk@ozlabs.org,
        andrew@codeconstruct.com.au, linux-aspeed@lists.ozlabs.org,
        eajames@linux.ibm.com
Subject: [PATCH v3 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies
Date: Thu, 16 May 2024 13:19:07 -0500
Message-Id: <20240516181907.3468796-41-eajames@linux.ibm.com>
In-Reply-To: <20240516181907.3468796-1-eajames@linux.ibm.com>
References: <20240516181907.3468796-1-eajames@linux.ibm.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Series

fsi: Add interrupt support | expand

Commit Message

Eddie James May 16, 2024, 6:19 p.m. UTC

These parts support 10MHZ.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 .../dts/aspeed/aspeed-bmc-ibm-everest.dts     | 32 +++++++++----------
 .../arm/boot/dts/aspeed/ibm-power10-dual.dtsi | 16 +++++-----
 .../arm/boot/dts/aspeed/ibm-power10-quad.dtsi | 16 +++++-----
 3 files changed, 32 insertions(+), 32 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index 214b2e6a4c6df..1365dc95f1352 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -2797,7 +2797,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -2813,7 +2813,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -2830,7 +2830,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -2847,7 +2847,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 		};
@@ -3170,7 +3170,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -3186,7 +3186,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -3203,7 +3203,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -3220,7 +3220,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 		};
@@ -3543,7 +3543,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -3559,7 +3559,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -3576,7 +3576,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -3593,7 +3593,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 		};
@@ -3916,7 +3916,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -3932,7 +3932,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -3949,7 +3949,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -3966,7 +3966,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index 44e48e39e6e96..e11354bb384c2 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -94,7 +94,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -110,7 +110,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -127,7 +127,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -144,7 +144,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 		};
@@ -261,7 +261,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -277,7 +277,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -294,7 +294,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -311,7 +311,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
index 57494c744b5d0..0ffb4ae6423fc 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
@@ -744,7 +744,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -760,7 +760,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -777,7 +777,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -794,7 +794,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 		};
@@ -1117,7 +1117,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -1133,7 +1133,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -1150,7 +1150,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 
@@ -1167,7 +1167,7 @@  eeprom@0 {
 
 					compatible = "atmel,at25";
 					reg = <0>;
-					spi-max-frequency = <1000000>;
+					spi-max-frequency = <10000000>;
 				};
 			};
 		};

[v3,40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies

Commit Message

Patch