@@ -95,6 +95,10 @@ wants to support one of the below features, it should adapt these bindings.
- smbus-alert
states that the optional SMBus-Alert feature apply to this bus.
+- mctp-controller
+ indicates that the system is accessible via this bus as an endpoint for
+ MCTP over I2C transport.
+
Required properties (per child device)
--------------------------------------
new file mode 100644
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mctp-i2c-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCTP I2C transport binding
+
+maintainers:
+ - Matt Johnston <matt@codeconstruct.com.au>
+
+description: |
+ An mctp-i2c-controller defines a local MCTP endpoint on an I2C controller.
+ MCTP I2C is specified by DMTF DSP0237.
+
+ An mctp-i2c-controller must be attached to an I2C adapter which supports
+ slave functionality. I2C busses (either directly or as subordinate mux
+ busses) are attached to the mctp-i2c-controller with a 'mctp-controller'
+ property on each used bus. Each mctp-controller I2C bus will be presented
+ to the host system as a separate MCTP I2C instance.
+
+properties:
+ compatible:
+ const: mctp-i2c-controller
+
+ reg:
+ minimum: 0x40000000
+ maximum: 0x4000007f
+ description: |
+ 7 bit I2C address of the local endpoint.
+ I2C_OWN_SLAVE_ADDRESS (1<<30) flag must be set.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ // Basic case of a single I2C bus
+ #include <dt-bindings/i2c/i2c.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mctp-controller;
+
+ mctp@30 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x30 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+ };
+
+ - |
+ // Mux topology with multiple MCTP-handling busses under
+ // a single mctp-i2c-controller.
+ // i2c1 and i2c6 can have MCTP devices, i2c5 does not.
+ #include <dt-bindings/i2c/i2c.h>
+
+ i2c1: i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mctp-controller;
+
+ mctp@50 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x50 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+ };
+
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c1>;
+
+ i2c5: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ eeprom@33 {
+ reg = <0x33>;
+ };
+ };
+
+ i2c6: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ mctp-controller;
+ };
+ };
Used to define a local endpoint to communicate with MCTP peripherals attached to an I2C bus. This I2C endpoint can communicate with remote MCTP devices on the I2C bus. In the example I2C topology below (matching the second yaml example) we have MCTP devices on busses i2c1 and i2c6. MCTP-supporting busses are indicated by the 'mctp-controller' DT property on an I2C bus node. A mctp-i2c-controller I2C client DT node is placed at the top of the mux topology, since only the root I2C adapter will support I2C slave functionality. .-------. |eeprom | .------------. .------. /'-------' | adapter | | mux --@0,i2c5------' | i2c1 ----.*| --@1,i2c6--.--. |............| \'------' \ \ ......... | mctp-i2c- | \ \ \ .mctpB . | controller | \ \ '.0x30 . | | \ ......... \ '.......' | 0x50 | \ .mctpA . \ ......... '------------' '.0x1d . '.mctpC . '.......' '.0x31 . '.......' (mctpX boxes above are remote MCTP devices not included in the DT at present, they can be hotplugged/probed at runtime. A DT binding for specific fixed MCTP devices could be added later if required) Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Reviewed-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/i2c/i2c.txt | 4 + .../bindings/net/mctp-i2c-controller.yaml | 92 +++++++++++++++++++ 2 files changed, 96 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml