diff mbox series

[2/7] decode-dimms: Print kernel driver used

Message ID 20190903112151.3e63882b@endymion
State Awaiting Upstream
Headers show
Series i2c-tools: Various fixes and improvements to decode-dimms | expand

Commit Message

Jean Delvare Sept. 3, 2019, 9:21 a.m. UTC
When not reading from dump files, print which kernel driver is being
used.  This will help spot setup mistakes where the legacy eeprom
driver stole EEPROMs from the ee1004 driver for DDR4 memory.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
---
 eeprom/decode-dimms |   24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)
diff mbox series

Patch

Index: i2c-tools/eeprom/decode-dimms
===================================================================
--- i2c-tools.orig/eeprom/decode-dimms
+++ i2c-tools/eeprom/decode-dimms
@@ -2537,17 +2537,22 @@  sub sysfs_device_attribute
 
 sub get_dimm_list
 {
-	my (@dirs, $dir, $opened, $file, @files);
+	my (@drivers, $driver, $dir, $opened, $file, @files);
 
 	if ($use_sysfs) {
-		@dirs = ('/sys/bus/i2c/drivers/eeprom',
-			 '/sys/bus/i2c/drivers/at24',
-			 '/sys/bus/i2c/drivers/ee1004');	# DDR4
+		@drivers = ('eeprom',
+			    'at24',
+			    'ee1004');	# DDR4
 	} else {
-		@dirs = ('/proc/sys/dev/sensors');
+		@drivers = ('eeprom');
+		$dir = '/proc/sys/dev/sensors';
 	}
 
-	foreach $dir (@dirs) {
+	foreach $driver (@drivers) {
+		if ($use_sysfs) {
+			$dir = "/sys/bus/i2c/drivers/$driver";
+		}
+
 		next unless opendir(local *DIR, $dir);
 		$opened++;
 		while (defined($file = readdir(DIR))) {
@@ -2567,7 +2572,8 @@  sub get_dimm_list
 				next unless $file =~ /^eeprom-/;
 			}
 			push @files, { eeprom => "$file",
-				       file => "$dir/$file" };
+				       file => "$dir/$file",
+				       driver => "$driver" };
 		}
 		close(DIR);
 	}
@@ -2584,6 +2590,7 @@  sub get_dimm_list
 # Each hash has the following keys:
 #  * eeprom: Name of the eeprom data file
 #  * file: Full path to the eeprom data file
+#  * driver: Driver used to retrieve the data (undef for dump files)
 #  * bytes: The EEPROM data (array)
 #  * is_rambus: Whether this is a RAMBUS DIMM or not (boolean)
 #  * chk_label: The label to display for the checksum or CRC
@@ -2650,6 +2657,7 @@  for $current (0 .. $#dimm) {
 				printl("Guessing DIMM is in", "bank $dimm_num");
 			}
 		}
+		printl("Kernel driver used", $dimm[$current]->{driver});
 	}
 
 # Decode first 3 bytes (0-2)
@@ -2724,6 +2732,8 @@  for $current (0 .. $#dimm) {
 		# 320-383
 		if (@bytes >= 384) {
 			decode_ddr4_mfg_data(\@bytes);
+		} elsif (!$use_hexdump && $dimm[$current]->{driver} ne "ee1004") {
+			print STDERR "HINT: You should be using the ee1004 driver instead of the $dimm[$current]->{driver} driver\n";
 		}
 	} else {
 		# Decode next 35 bytes (64-98, common to most