diff mbox series

[v5,2/3] i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h

Message ID 20190802145438.601c9a8c@endymion
State Accepted
Headers show
Series Enable ACPI-defined peripherals on i2c-piix4 SMBus | expand

Commit Message

Jean Delvare Aug. 2, 2019, 12:54 p.m. UTC
Prevent bus timeouts and resets on Family 16h Model 30h by not probing
reserved Ports 3 and 4.

According to the AMD BIOS and Kernel Developer's Guides (BKDG), Port 3
and Port 4 are reserved on the following devices:
 - Family 15h Model 60h-6Fh
 - Family 15h Model 70h-7Fh
 - Family 16h Model 30h-3Fh

Based on earlier work by Andrew Cooks.

Reported-by: Andrew Cooks <andrew.cooks@opengear.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
---
Changes since v4:
 * Fix subject line
 * Drop local variable port_count, use piix4_adapter_count
   everywhere to represent the maximum number of main SMBus ports
 * Exclude early Hudson2 implementations from this change

 drivers/i2c/busses/i2c-piix4.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

Comments

Wolfram Sang Aug. 29, 2019, 8:20 p.m. UTC | #1
On Fri, Aug 02, 2019 at 02:54:38PM +0200, Jean Delvare wrote:
> Prevent bus timeouts and resets on Family 16h Model 30h by not probing
> reserved Ports 3 and 4.
> 
> According to the AMD BIOS and Kernel Developer's Guides (BKDG), Port 3
> and Port 4 are reserved on the following devices:
>  - Family 15h Model 60h-6Fh
>  - Family 15h Model 70h-7Fh
>  - Family 16h Model 30h-3Fh
> 
> Based on earlier work by Andrew Cooks.
> 
> Reported-by: Andrew Cooks <andrew.cooks@opengear.com>
> Signed-off-by: Jean Delvare <jdelvare@suse.de>

I wondered if this wasn't also for-current material (it saves timeouts),
but trusting Jean's judgement here.

Applied to for-next, thanks!
diff mbox series

Patch

--- linux-5.2.orig/drivers/i2c/busses/i2c-piix4.c	2019-08-02 14:08:17.003820098 +0200
+++ linux-5.2/drivers/i2c/busses/i2c-piix4.c	2019-08-02 14:15:38.284423549 +0200
@@ -72,7 +72,8 @@ 
 #define PIIX4_BLOCK_DATA	0x14
 
 /* Multi-port constants */
-#define PIIX4_MAX_ADAPTERS 4
+#define PIIX4_MAX_ADAPTERS	4
+#define HUDSON2_MAIN_PORTS	2 /* HUDSON2, KERNCZ reserves ports 3, 4 */
 
 /* SB800 constants */
 #define SB800_PIIX4_SMB_IDX		0xcd6
@@ -806,6 +807,7 @@  MODULE_DEVICE_TABLE (pci, piix4_ids);
 
 static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
 static struct i2c_adapter *piix4_aux_adapter;
+static int piix4_adapter_count;
 
 static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 			     bool sb800_main, u8 port, bool notify_imc,
@@ -865,7 +867,15 @@  static int piix4_add_adapters_sb800(stru
 	int port;
 	int retval;
 
-	for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {
+	if (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS ||
+	    (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
+	     dev->revision >= 0x1F)) {
+		piix4_adapter_count = HUDSON2_MAIN_PORTS;
+	} else {
+		piix4_adapter_count = PIIX4_MAX_ADAPTERS;
+	}
+
+	for (port = 0; port < piix4_adapter_count; port++) {
 		retval = piix4_add_adapter(dev, smba, true, port, notify_imc,
 					   piix4_main_port_names_sb800[port],
 					   &piix4_main_adapters[port]);
@@ -987,7 +997,7 @@  static void piix4_adap_remove(struct i2c
 
 static void piix4_remove(struct pci_dev *dev)
 {
-	int port = PIIX4_MAX_ADAPTERS;
+	int port = piix4_adapter_count;
 
 	while (--port >= 0) {
 		if (piix4_main_adapters[port]) {