diff mbox series

[v2] i2c: designware: select gpio/default pin when prepare/unprepare recovery

Message ID 20180913162132.17c9c2b3@xhacker.debian
State Superseded
Headers show
Series [v2] i2c: designware: select gpio/default pin when prepare/unprepare recovery | expand

Commit Message

Jisheng Zhang Sept. 13, 2018, 8:21 a.m. UTC 
On some platforms, the sda/scl pins are muxed with gpio functions, so
they could be used for recovery. Select the gpio/default pin function
when prepare/unprepare recovery.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---

since v1:
 - use IS_ERR_OR_NULL

 drivers/i2c/busses/i2c-designware-core.h   |  3 +++
 drivers/i2c/busses/i2c-designware-master.c | 22 ++++++++++++++++++++++
 2 files changed, 25 insertions(+)

Comments

Jarkko Nikula Sept. 13, 2018, 1:50 p.m. UTC | #1 
On 09/13/2018 11:21 AM, Jisheng Zhang wrote:
> On some platforms, the sda/scl pins are muxed with gpio functions, so
> they could be used for recovery. Select the gpio/default pin function
> when prepare/unprepare recovery.
> 
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
> ---
> 
> since v1:
>   - use IS_ERR_OR_NULL
> 
>   drivers/i2c/busses/i2c-designware-core.h   |  3 +++
>   drivers/i2c/busses/i2c-designware-master.c | 22 ++++++++++++++++++++++
>   2 files changed, 25 insertions(+)
> 
...
> +	pinctrl = devm_pinctrl_get(dev->dev);
> +	if (PTR_ERR(pinctrl) == -EPROBE_DEFER)
> +		return -EPROBE_DEFER;
> +	if (!IS_ERR_OR_NULL(pinctrl)) {
> +		dev->pinctrl = pinctrl;
> +		s = pinctrl_lookup_state(pinctrl, PINCTRL_STATE_DEFAULT);
> +		if (!IS_ERR_OR_NULL(s))
> +			dev->pins_default = s;
> +		s = pinctrl_lookup_state(pinctrl, "gpio");
> +		if (!IS_ERR_OR_NULL(s))
> +			dev->pins_gpio = s;
> +	}
> +

Should these be documented in 
Documentation/devicetree/bindings/i2c/i2c-designware.txt?
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index e367b1af4ab2..01d5f01691a4 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -271,6 +271,9 @@  struct dw_i2c_dev {
 	int			(*init)(struct dw_i2c_dev *dev);
 	int			mode;
 	struct i2c_bus_recovery_info rinfo;
+	struct pinctrl		*pinctrl;
+	struct pinctrl_state	*pins_default;
+	struct pinctrl_state	*pins_gpio;
 };
 
 #define ACCESS_SWAP		0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 94d94b4a9a0d..384d6630366a 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -17,6 +17,7 @@ 
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
@@ -629,6 +630,9 @@  static void i2c_dw_prepare_recovery(struct i2c_adapter *adap)
 {
 	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 
+	if (dev->pinctrl && dev->pins_gpio)
+		pinctrl_select_state(dev->pinctrl, dev->pins_gpio);
+
 	i2c_dw_disable(dev);
 	reset_control_assert(dev->rst);
 	i2c_dw_prepare_clk(dev, false);
@@ -641,6 +645,9 @@  static void i2c_dw_unprepare_recovery(struct i2c_adapter *adap)
 	i2c_dw_prepare_clk(dev, true);
 	reset_control_deassert(dev->rst);
 	i2c_dw_init_master(dev);
+
+	if (dev->pinctrl && dev->pins_default)
+		pinctrl_select_state(dev->pinctrl, dev->pins_default);
 }
 
 static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
@@ -648,6 +655,8 @@  static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
 	struct i2c_adapter *adap = &dev->adapter;
 	struct gpio_desc *gpio;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *s;
 	int r;
 
 	gpio = devm_gpiod_get(dev->dev, "scl", GPIOD_OUT_HIGH);
@@ -664,6 +673,19 @@  static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 		return PTR_ERR(gpio);
 	rinfo->sda_gpiod = gpio;
 
+	pinctrl = devm_pinctrl_get(dev->dev);
+	if (PTR_ERR(pinctrl) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (!IS_ERR_OR_NULL(pinctrl)) {
+		dev->pinctrl = pinctrl;
+		s = pinctrl_lookup_state(pinctrl, PINCTRL_STATE_DEFAULT);
+		if (!IS_ERR_OR_NULL(s))
+			dev->pins_default = s;
+		s = pinctrl_lookup_state(pinctrl, "gpio");
+		if (!IS_ERR_OR_NULL(s))
+			dev->pins_gpio = s;
+	}
+
 	rinfo->recover_bus = i2c_generic_scl_recovery;
 	rinfo->prepare_recovery = i2c_dw_prepare_recovery;
 	rinfo->unprepare_recovery = i2c_dw_unprepare_recovery;