[4/7,v3] i2c: gpio: Augment all boardfiles to use open drain

Message ID	20171005110310.5900-5-linus.walleij@linaro.org
State	Accepted
Headers	show Return-Path: <linux-i2c-owner@vger.kernel.org> From: Linus Walleij <linus.walleij@linaro.org> To: Wolfram Sang <wsa@the-dreams.de>, linux-i2c@vger.kernel.org Cc: Linus Walleij <linus.walleij@linaro.org>, Steven Miao <realmz6@gmail.com>, Ralf Baechle <ralf@linux-mips.org> Subject: [PATCH 4/7 v3] i2c: gpio: Augment all boardfiles to use open drain Date: Thu, 5 Oct 2017 13:03:07 +0200 Message-Id: <20171005110310.5900-5-linus.walleij@linaro.org> In-Reply-To: <20171005110310.5900-1-linus.walleij@linaro.org> References: <20171005110310.5900-1-linus.walleij@linaro.org> Sender: linux-i2c-owner@vger.kernel.org Precedence: bulk
Series	I2C GPIO to use gpiolibs open drain \| expand [0/7,v3] I2C GPIO to use gpiolibs open drain [1/7,v3] i2c: gpio: Convert to use descriptors [2/7,v3] gpio: Make it possible for consumers to enforce open drain [3/7,v3] i2c: gpio: Enforce open drain through gpiolib [4/7,v3] i2c: gpio: Augment all boardfiles to use open drain [5/7,v3] i2c: gpio: Local vars in probe [6/7,v3] dt-bindings: i2c: i2c-gpio: Add support for named gpios [7/7,v3] i2c: gpio: Add support for named gpios in DT

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 7e99fe829ad1..e70feec6fad5 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -326,8 +326,10 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { /* Use local offsets on gpiochip/port "G" */ - GPIO_LOOKUP_IDX("G", 1, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("G", 0, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("G", 1, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP_IDX("G", 0, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 72122b5e7f28..bb6fbfc9b11a 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -53,9 +53,9 @@ static struct gpiod_lookup_table avila_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 68ccd669051b..af543dd3da5d 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -72,9 +72,9 @@ static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index a0350ad15175..8afb3f4db376 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -58,9 +58,9 @@ static struct gpiod_lookup_table fsg_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 8937263cec4a..4f358350a91f 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -126,9 +126,9 @@ static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 612ec8c63456..7e59c59c96a3 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -104,9 +104,9 @@ static struct gpiod_lookup_table nas100d_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 13afb03b50fa..224717eb8ac2 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -72,9 +72,9 @@ static struct gpiod_lookup_table nslu2_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SCL_PIN, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index f034724e01e1..937eb1d47e7b 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -41,8 +41,10 @@ static struct gpiod_lookup_table acs5k_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { - GPIO_LOOKUP_IDX("KS8695", 4, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("KS8695", 5, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("KS8695", 4, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP_IDX("KS8695", 5, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 94f75632c007..5877e547cecd 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -324,8 +324,10 @@ static struct soc_camera_link palmz72_iclink = { static struct gpiod_lookup_table palmz72_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { - GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio-pxa", 117, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP_IDX("gpio-pxa", 117, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index a680742bee2b..4185e7ff073f 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -463,9 +463,9 @@ static struct gpiod_lookup_table viper_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SCL_GPIO, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; @@ -792,9 +792,9 @@ struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SCL_GPIO, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index c6e7e6d8733a..91526024964b 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -327,8 +327,10 @@ static struct platform_device simpad_gpio_leds = { static struct gpiod_lookup_table simpad_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { - GPIO_LOOKUP_IDX("gpio", GPIO_GPIO21, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio", GPIO_GPIO25, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio", GPIO_GPIO21, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP_IDX("gpio", GPIO_GPIO25, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index d801ca5ca6c4..fab69c736515 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -367,9 +367,9 @@ static struct gpiod_lookup_table bfin_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF8, NULL, 0, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF9, NULL, 1, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 463a72358b0e..d64d270e9e62 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -395,9 +395,9 @@ static struct gpiod_lookup_table bfin_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF1, NULL, 0, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF0, NULL, 1, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index d2479359adb7..27cbf2fa2c62 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -517,9 +517,9 @@ static struct gpiod_lookup_table bfin_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF2, NULL, 0, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF3, NULL, 1, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 72f757ebaa84..acc5363f60c6 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -384,9 +384,9 @@ static struct gpiod_lookup_table bfin_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF1, NULL, 0, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF0, NULL, 1, - GPIO_ACTIVE_HIGH), + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c index daebc36e5ecb..328d697e72b4 100644 --- a/arch/mips/alchemy/board-gpr.c +++ b/arch/mips/alchemy/board-gpr.c @@ -235,6 +235,10 @@ static struct gpiod_lookup_table gpr_i2c_gpiod_table = { }; static struct i2c_gpio_platform_data gpr_i2c_data = { + /* + * The open drain mode is hardwired somewhere or an electrical + * property of the alchemy GPIO controller. + */ .sda_is_open_drain = 1, .scl_is_open_drain = 1, .udelay = 2, /* ~100 kHz */ diff --git a/arch/mips/ath79/mach-pb44.c b/arch/mips/ath79/mach-pb44.c index a95409063847..6b2c6f3baefa 100644 --- a/arch/mips/ath79/mach-pb44.c +++ b/arch/mips/ath79/mach-pb44.c @@ -37,9 +37,9 @@ static struct gpiod_lookup_table pb44_i2c_gpiod_table = { .dev_id = "i2c-gpio", .table = { GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA, - NULL, 0, GPIO_ACTIVE_HIGH), + NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL, - NULL, 1, GPIO_ACTIVE_HIGH), + NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 4d40d013a412..ad774161a22d 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1152,7 +1152,7 @@ static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm, lookup->table[0].chip_hwnum = iic->pin_sda % 32; lookup->table[0].con_id = NULL; lookup->table[0].idx = 0; - lookup->table[0].flags = GPIO_ACTIVE_HIGH; + lookup->table[0].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN; if (iic->pin_scl < 32) lookup->table[1].chip_label = "SM501-LOW"; else @@ -1160,7 +1160,7 @@ static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm, lookup->table[1].chip_hwnum = iic->pin_scl % 32; lookup->table[1].con_id = NULL; lookup->table[1].idx = 1; - lookup->table[1].flags = GPIO_ACTIVE_HIGH; + lookup->table[1].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN; gpiod_add_lookup_table(lookup); icd = dev_get_platdata(&pdev->dev);

[4/7,v3] i2c: gpio: Augment all boardfiles to use open drain

Commit Message

Patch