@@ -109,7 +109,7 @@ CONFIG_SERIAL_BFIN_UART1=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_SMBUS=y
+CONFIG_I2C_SMBUS_ALERT=y
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_GPIOLIB=y
@@ -55,7 +55,7 @@ config I2C_CHARDEV
programs use the I2C bus. Information on how to do this is
contained in the file <file:Documentation/i2c/dev-interface>.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called i2c-dev.
config I2C_MUX
@@ -84,12 +84,11 @@ config I2C_HELPER_AUTO
In doubt, say Y.
-config I2C_SMBUS
- tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
+config I2C_SMBUS_ALERT
+ tristate "SMBus-alert protocol" if !I2C_HELPER_AUTO
help
- Say Y here if you want support for SMBus extensions to the I2C
- specification. At the moment, two extensions are supported:
- the SMBus Alert protocol and the SMBus Host Notify protocol.
+ Say Y here if you want support for SMBus alert extensions to the I2C
+ specification.
This support is also available as a module. If so, the module
will be called i2c-smbus.
@@ -9,7 +9,7 @@ i2c-core-$(CONFIG_ACPI) += i2c-core-acpi.o
i2c-core-$(CONFIG_I2C_SLAVE) += i2c-core-slave.o
i2c-core-$(CONFIG_OF) += i2c-core-of.o
-obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o
+obj-$(CONFIG_I2C_SMBUS_ALERT) += i2c-smbus.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_MUX) += i2c-mux.o
obj-y += algos/ busses/ muxes/
@@ -91,7 +91,7 @@ config I2C_I801
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
select CHECK_SIGNATURE if X86 && DMI
- select I2C_SMBUS
+ select I2C_SMBUS_ALERT
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
@@ -1056,7 +1056,7 @@ config I2C_OCTEON
config I2C_THUNDERX
tristate "Cavium ThunderX I2C bus support"
depends on 64BIT && PCI && (ARM64 || COMPILE_TEST)
- select I2C_SMBUS
+ select I2C_SMBUS_ALERT
help
Say yes if you want to support the I2C serial bus on Cavium
ThunderX SOC.
@@ -1132,7 +1132,7 @@ config I2C_PARPORT
tristate "Parallel port adapter"
depends on PARPORT
select I2C_ALGOBIT
- select I2C_SMBUS
+ select I2C_SMBUS_ALERT
help
This supports parallel port I2C adapters such as the ones made by
Philips or Velleman, Analog Devices evaluation boards, and more.
@@ -1156,7 +1156,7 @@ config I2C_PARPORT
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
select I2C_ALGOBIT
- select I2C_SMBUS
+ select I2C_SMBUS_ALERT
help
This supports parallel port I2C adapters such as the ones made by
Philips or Velleman, Analog Devices evaluation boards, and more.
@@ -626,7 +626,7 @@ struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
}
EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert);
-#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF)
+#if IS_ENABLED(CONFIG_I2C_SMBUS_ALERT) && IS_ENABLED(CONFIG_OF)
int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
{
struct i2c_client *client;
@@ -61,7 +61,7 @@ static inline void of_i2c_register_devices(struct i2c_adapter *adap) { }
#endif
extern struct notifier_block i2c_of_notifier;
-#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF)
+#if IS_ENABLED(CONFIG_I2C_SMBUS_ALERT) && IS_ENABLED(CONFIG_OF)
int of_i2c_setup_smbus_alert(struct i2c_adapter *adap);
#else
static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap)
@@ -187,7 +187,7 @@ config CHARGER_SBS
config MANAGER_SBS
tristate "Smart Battery System Manager"
depends on I2C && I2C_MUX && GPIOLIB
- select I2C_SMBUS
+ select I2C_SMBUS_ALERT
help
Say Y here to include support for Smart Battery System Manager
ICs. The driver reports online and charging status via sysfs.
i2c-smbus now only contains code related to the smbus_alert driver. Other smbus protocols have been moved from this into the i2c-core-smbus. Change the Kconfig variable name to reflect this. Signed-off-by: Phil Reid <preid@electromag.com.au> --- arch/blackfin/configs/BF527-TLL6527M_defconfig | 2 +- drivers/i2c/Kconfig | 11 +++++------ drivers/i2c/Makefile | 2 +- drivers/i2c/busses/Kconfig | 8 ++++---- drivers/i2c/i2c-core-smbus.c | 2 +- drivers/i2c/i2c-core.h | 2 +- drivers/power/supply/Kconfig | 2 +- 7 files changed, 14 insertions(+), 15 deletions(-)