diff mbox

[1/3] dt-bindings: i2c: eeprom: document all at24 bindings

Message ID 1499336217-16913-2-git-send-email-claudiu.beznea@microchip.com
State New, archived
Delegated to: Bartosz Golaszewski
Headers show

Commit Message

Claudiu Beznea July 6, 2017, 10:16 a.m. UTC 
Document all at24 memories specific bindings.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 Documentation/devicetree/bindings/eeprom/eeprom.txt | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

Comments

Rob Herring July 10, 2017, 3:44 a.m. UTC | #1 
On Thu, Jul 06, 2017 at 01:16:55PM +0300, Claudiu Beznea wrote:
> Document all at24 memories specific bindings.

This will probably conflict with Javier's series "eeprom: at24: Add OF 
device ID table".

Rob
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt
index 5696eb5..a50dc01 100644
--- a/Documentation/devicetree/bindings/eeprom/eeprom.txt
+++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt
@@ -4,9 +4,11 @@  Required properties:
 
   - compatible : should be "<manufacturer>,<type>", like these:
 
-	"atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04",
-	"atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64",
-	"atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024"
+	"atmel,24c00", "atmel,24c01", "atmel,24cs01", "atmel,24c02", "atmel,24cs02",
+	"atmel,24mac402", "atmel,24mac602", "atmel,spd", "atmel,24c04",
+	"atmel,24cs04", "atmel,24c08", "atmel,24cs08", "atmel,24c16", "atmel,24cs16",
+	"atmel,24c32", "atmel,24cs32", "atmel,24c64", "atmel,24cs64", "atmel,24c128",
+	"atmel,24c256", "atmel,24c512", "atmel,24c1024"
 
 	"catalyst,24c32"
 
@@ -16,10 +18,11 @@  Required properties:
 
 	"renesas,r1ex24002"
 
-	 If there is no specific driver for <manufacturer>, a generic
-	 driver based on <type> is selected. Possible types are:
-	 "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64",
-	 "24c128", "24c256", "24c512", "24c1024", "spd"
+	If there is no specific driver for <manufacturer>, a generic
+	driver based on <type> is selected. Possible types are:
+	"24c00", "24c01", "24cs01", "24c02", "24cs02", "24mac402", "24mac602", "spd",
+	"24c04", "24cs04", "24c08", "24cs08", "24c16", "24cs16", "24c32", "24cs32",
+	"24c64", "24cs64", "24c128", "24c256", "24c512", "24c1024"
 
   - reg : the I2C address of the EEPROM