@@ -463,7 +463,11 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
if (timeout <= 0) {
dev_warn(dev->dev, "timeout waiting for bus ready\n");
- return -ETIMEDOUT;
+ i2c_recover_bus(&dev->adapter);
+
+ if (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY)
+ return -ETIMEDOUT;
+ return 0;
}
timeout--;
usleep_range(1000, 1100);
@@ -719,9 +723,10 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
- if (abort_source & DW_IC_TX_ARB_LOST)
+ if (abort_source & DW_IC_TX_ARB_LOST) {
+ i2c_recover_bus(&dev->adapter);
return -EAGAIN;
- else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
+ } else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
return -EINVAL; /* wrong msgs[] data */
else
return -EIO;
@@ -766,6 +771,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
dev_err(dev->dev, "controller timed out\n");
/* i2c_dw_init implicitly disables the adapter */
+ i2c_recover_bus(&dev->adapter);
i2c_dw_init(dev);
ret = -ETIMEDOUT;
goto done;
@@ -129,6 +129,7 @@ struct dw_i2c_dev {
int (*acquire_lock)(struct dw_i2c_dev *dev);
void (*release_lock)(struct dw_i2c_dev *dev);
bool pm_disabled;
+ struct i2c_bus_recovery_info rinfo;
};
#define ACCESS_SWAP 0x00000001
@@ -31,6 +31,7 @@
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -206,6 +207,59 @@ static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
}
}
+static void i2c_dw_prepare_recovery(struct i2c_adapter *adap)
+{
+ struct platform_device *pdev = to_platform_device(&adap->dev);
+ struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+
+ i2c_dw_disable(i_dev);
+ reset_control_assert(i_dev->rst);
+ i2c_dw_plat_prepare_clk(i_dev, false);
+}
+
+static void i2c_dw_unprepare_recovery(struct i2c_adapter *adap)
+{
+ struct platform_device *pdev = to_platform_device(&adap->dev);
+ struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+
+ i2c_dw_plat_prepare_clk(i_dev, true);
+ reset_control_deassert(i_dev->rst);
+ i2c_dw_init(i_dev);
+}
+
+static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev,
+ struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
+ struct gpio_desc *gpio;
+ int r;
+
+ gpio = devm_gpiod_get(dev->dev, "scl", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpio)) {
+ r = PTR_ERR(gpio);
+ if ((r == -ENOENT) || (r == -ENOENT))
+ return 0;
+ return r;
+ }
+ rinfo->scl_gpiod = gpio;
+
+ gpio = devm_gpiod_get_optional(dev->dev, "sda", GPIOD_IN);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
+ rinfo->sda_gpiod = gpio;
+
+ rinfo->recover_bus = i2c_generic_scl_recovery;
+ rinfo->prepare_recovery = i2c_dw_prepare_recovery;
+ rinfo->unprepare_recovery = i2c_dw_unprepare_recovery;
+ adap->bus_recovery_info = rinfo;
+
+ dev_info(dev->dev,
+ "adapter: %s running with gpio recovery mode! scl:%i sda:%i\n",
+ adap->name, !!rinfo->scl_gpiod, !!rinfo->sda_gpiod);
+
+ return 0;
+}
+
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -327,6 +381,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
}
+ r = i2c_dw_init_recovery_info(dev, adap);
+ if (r == -EPROBE_DEFER)
+ goto exit_probe;
+
r = i2c_dw_probe(dev);
if (r)
goto exit_probe;