new file mode 100644
@@ -0,0 +1,63 @@
+Device tree configuration for the I2C controller and busses on the AST24XX
+and AST25XX SoCs.
+
+Controller:
+
+ Required Properties:
+ - #address-cells : should be 1
+ - #size-cells : should be 1
+ - #interrupt-cells : should be 1
+ - compatible : should be "aspeed,ast2400-i2c-controller"
+ or "aspeed,ast2500-i2c-controller"
+ - reg : address start and range of controller
+ - ranges : defines address offset and range for busses
+ - interrupts : interrupt number
+ - clocks : root clock of bus, should reference the APB
+ clock
+ - clock-ranges : specifies that child busses can inherit clocks
+ - interrupt-controller : denotes that the controller receives and fires
+ new interrupts for child busses
+
+Bus:
+
+ Required Properties:
+ - #address-cells : should be 1
+ - #size-cells : should be 0
+ - reg : address offset and range of bus
+ - compatible : should be "aspeed,ast2400-i2c-bus"
+ or "aspeed,ast2500-i2c-bus"
+ - bus : the bus's number
+ - interrupts : interrupt number
+
+ Optional Properties:
+ - clock-frequency : frequency of the bus clock in Hz
+ defaults to 100 kHz when not specified
+
+Example:
+
+i2c: i2c@1e78a000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+
+ compatible = "aspeed,ast2400-i2c-controller";
+ reg = <0x1e78a000 0x40>;
+ ranges = <0 0x1e78a000 0x1000>;
+ interrupts = <12>;
+ clocks = <&clk_apb>;
+ clock-ranges;
+ interrupt-controller;
+
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <0>;
+ interrupt-parent = <&i2c>;
+ };
+};
+
Added device tree binding documentation for Aspeed I2C controller and busses. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> --- .../devicetree/bindings/i2c/i2c-aspeed.txt | 63 ++++++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt