diff mbox

[1/1] drivers/misc: at2x: use devm_kzalloc() to make cleanup paths simpler

Message ID 1369767800-31895-1-git-send-email-n.a.balandin@gmail.com
State Superseded
Headers show

Commit Message

Nikolay Balandin May 28, 2013, 7:03 p.m. UTC
From: Nikolay Balandin <nbalandin@dev.rtsoft.ru>

Use devm_kzalloc() instead of kzalloc. Get rid of the "goto" statements
and useless dev_dbg() calls when driver probe fails.

Signed-off-by: Nikolay Balandin <nbalandin@dev.rtsoft.ru>
---
 drivers/misc/eeprom/at24.c |   50 +++++++++++++++-----------------------------
 drivers/misc/eeprom/at25.c |   25 +++++++---------------
 2 files changed, 25 insertions(+), 50 deletions(-)

Comments

Andy Shevchenko May 28, 2013, 8:10 p.m. UTC | #1
Thanks for updated version.
Please, find few comments below.

On Tue, May 28, 2013 at 10:03 PM, Nikolay Balandin
<n.a.balandin@gmail.com> wrote:
> From: Nikolay Balandin <nbalandin@dev.rtsoft.ru>

Next time you may use --subject-prefix to specify the version of the
patch. This one in particular is "PATCH v2".

I'm pretty sure Greg or any maintainer will ask you to split your
patch to two: one per driver.

> Use devm_kzalloc() instead of kzalloc. Get rid of the "goto" statements
> and useless dev_dbg() calls when driver probe fails.

I think in the subject line is better to write something like
"at24: convert to use devm_kzalloc".
For at25 accordingly.

> --- a/drivers/misc/eeprom/at24.c
> +++ b/drivers/misc/eeprom/at24.c

struct i2c_device_id *id)
>                 } else if (i2c_check_functionality(client->adapter,
>                                 I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
>                         use_smbus = I2C_SMBUS_BYTE_DATA;
> -               } else {
> -                       err = -EPFNOSUPPORT;
> -                       goto err_out;
> -               }
> +               } else
> +                       return -EPFNOSUPPORT;

It's good to keep the style here untouched, because it follows CodingStyle.
thus
} else {
 return ...
}

> @@ -596,11 +589,11 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
>                         at24->write_max = write_max;
>
>                         /* buffer (data + address at the beginning) */
> -                       at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
> -                       if (!at24->writebuf) {
> -                               err = -ENOMEM;
> -                               goto err_struct;
> -                       }
> +                       at24->writebuf = devm_kzalloc(&client->dev,
> +                               write_max + 2, GFP_KERNEL);
> +

Redundant empty line

> +                       if (!at24->writebuf)
> +                               return -ENOMEM;
>                 } else {
>                         dev_warn(&client->dev,
>                                 "cannot write due to controller restrictions.");
> @@ -647,12 +640,6 @@ err_clients:
>         for (i = 1; i < num_addresses; i++)
>                 if (at24->client[i])
>                         i2c_unregister_device(at24->client[i]);
> -

No need to remove this empty line.

> @@ -666,9 +653,6 @@ static int at24_remove(struct i2c_client *client)
>
>         for (i = 1; i < at24->num_addresses; i++)
>                 i2c_unregister_device(at24->client[i]);
> -

Ditto.

--
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 2baeec5..6f0174b 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -492,10 +492,9 @@  static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	if (client->dev.platform_data) {
 		chip = *(struct at24_platform_data *)client->dev.platform_data;
 	} else {
-		if (!id->driver_data) {
-			err = -ENODEV;
-			goto err_out;
-		}
+		if (!id->driver_data)
+			return -ENODEV;
+
 		magic = id->driver_data;
 		chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
 		magic >>= AT24_SIZE_BYTELEN;
@@ -519,8 +518,7 @@  static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 			"byte_len looks suspicious (no power of 2)!\n");
 	if (!chip.page_size) {
 		dev_err(&client->dev, "page_size must not be 0!\n");
-		err = -EINVAL;
-		goto err_out;
+		return -EINVAL;
 	}
 	if (!is_power_of_2(chip.page_size))
 		dev_warn(&client->dev,
@@ -528,10 +526,9 @@  static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	/* Use I2C operations unless we're stuck with SMBus extensions. */
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		if (chip.flags & AT24_FLAG_ADDR16) {
-			err = -EPFNOSUPPORT;
-			goto err_out;
-		}
+		if (chip.flags & AT24_FLAG_ADDR16)
+			return -EPFNOSUPPORT;
+
 		if (i2c_check_functionality(client->adapter,
 				I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 			use_smbus = I2C_SMBUS_I2C_BLOCK_DATA;
@@ -541,10 +538,8 @@  static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		} else if (i2c_check_functionality(client->adapter,
 				I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
 			use_smbus = I2C_SMBUS_BYTE_DATA;
-		} else {
-			err = -EPFNOSUPPORT;
-			goto err_out;
-		}
+		} else
+			return -EPFNOSUPPORT;
 	}
 
 	if (chip.flags & AT24_FLAG_TAKE8ADDR)
@@ -553,12 +548,10 @@  static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		num_addresses =	DIV_ROUND_UP(chip.byte_len,
 			(chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
 
-	at24 = kzalloc(sizeof(struct at24_data) +
+	at24 = devm_kzalloc(&client->dev, sizeof(struct at24_data) +
 		num_addresses * sizeof(struct i2c_client *), GFP_KERNEL);
-	if (!at24) {
-		err = -ENOMEM;
-		goto err_out;
-	}
+	if (!at24)
+		return -ENOMEM;
 
 	mutex_init(&at24->lock);
 	at24->use_smbus = use_smbus;
@@ -596,11 +589,11 @@  static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 			at24->write_max = write_max;
 
 			/* buffer (data + address at the beginning) */
-			at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
-			if (!at24->writebuf) {
-				err = -ENOMEM;
-				goto err_struct;
-			}
+			at24->writebuf = devm_kzalloc(&client->dev,
+				write_max + 2, GFP_KERNEL);
+
+			if (!at24->writebuf)
+				return -ENOMEM;
 		} else {
 			dev_warn(&client->dev,
 				"cannot write due to controller restrictions.");
@@ -647,12 +640,6 @@  err_clients:
 	for (i = 1; i < num_addresses; i++)
 		if (at24->client[i])
 			i2c_unregister_device(at24->client[i]);
-
-	kfree(at24->writebuf);
-err_struct:
-	kfree(at24);
-err_out:
-	dev_dbg(&client->dev, "probe error %d\n", err);
 	return err;
 }
 
@@ -666,9 +653,6 @@  static int at24_remove(struct i2c_client *client)
 
 	for (i = 1; i < at24->num_addresses; i++)
 		i2c_unregister_device(at24->client[i]);
-
-	kfree(at24->writebuf);
-	kfree(at24);
 	return 0;
 }
 
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index ad8fd8e..840b359 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -371,11 +371,10 @@  static int at25_probe(struct spi_device *spi)
 		if (np) {
 			err = at25_np_to_chip(&spi->dev, np, &chip);
 			if (err)
-				goto fail;
+				return err;
 		} else {
 			dev_err(&spi->dev, "Error: no chip description\n");
-			err = -ENODEV;
-			goto fail;
+			return -ENODEV;
 		}
 	} else
 		chip = *(struct spi_eeprom *)spi->dev.platform_data;
@@ -389,8 +388,7 @@  static int at25_probe(struct spi_device *spi)
 		addrlen = 3;
 	else {
 		dev_dbg(&spi->dev, "unsupported address type\n");
-		err = -EINVAL;
-		goto fail;
+		return -EINVAL;
 	}
 
 	/* Ping the chip ... the status register is pretty portable,
@@ -400,14 +398,12 @@  static int at25_probe(struct spi_device *spi)
 	sr = spi_w8r8(spi, AT25_RDSR);
 	if (sr < 0 || sr & AT25_SR_nRDY) {
 		dev_dbg(&spi->dev, "rdsr --> %d (%02x)\n", sr, sr);
-		err = -ENXIO;
-		goto fail;
+		return -ENXIO;
 	}
 
-	if (!(at25 = kzalloc(sizeof *at25, GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto fail;
-	}
+	at25 = devm_kzalloc(&spi->dev, sizeof(struct at25_data), GFP_KERNEL);
+	if (!at25)
+		return -ENOMEM;
 
 	mutex_init(&at25->lock);
 	at25->chip = chip;
@@ -439,7 +435,7 @@  static int at25_probe(struct spi_device *spi)
 
 	err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin);
 	if (err)
-		goto fail;
+		return err;
 
 	if (chip.setup)
 		chip.setup(&at25->mem, chip.context);
@@ -453,10 +449,6 @@  static int at25_probe(struct spi_device *spi)
 		(chip.flags & EE_READONLY) ? " (readonly)" : "",
 		at25->chip.page_size);
 	return 0;
-fail:
-	dev_dbg(&spi->dev, "probe err %d\n", err);
-	kfree(at25);
-	return err;
 }
 
 static int at25_remove(struct spi_device *spi)
@@ -465,7 +457,6 @@  static int at25_remove(struct spi_device *spi)
 
 	at25 = spi_get_drvdata(spi);
 	sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin);
-	kfree(at25);
 	return 0;
 }