Show patches with: Archived = No       |   19577 patches
« 1 2 3 4195 196 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[5/5] i2c: rtl9300: Add multiplexing support i2c: RTL9300 support - - - - --- 2024-09-17 Chris Packham cazzacarna Changes Requested
[4/5] dt-bindings: i2c: Add RTL9300 I2C multiplexer i2c: RTL9300 support - - - - --- 2024-09-17 Chris Packham cazzacarna Changes Requested
[3/5] mips: dts: realtek: Add I2C controllers i2c: RTL9300 support - - - - --- 2024-09-17 Chris Packham cazzacarna Changes Requested
[2/5] i2c: Add driver for the RTL9300 I2C controller i2c: RTL9300 support - - - - --- 2024-09-17 Chris Packham cazzacarna Changes Requested
[1/5] dt-bindings: i2c: Add RTL9300 I2C controller i2c: RTL9300 support - - - - --- 2024-09-17 Chris Packham cazzacarna Changes Requested
[v2,5/5] MAINTAINERS: Add entry for Congatec Board Controller Congatec Board Controller drivers 1 - - - --- 2024-09-17 Thomas Richard New
[v2,4/5] watchdog: Congatec Board Controller watchdog timer driver Congatec Board Controller drivers - - - - --- 2024-09-17 Thomas Richard New
[v2,3/5] i2c: Congatec Board Controller i2c bus driver Congatec Board Controller drivers - - - - --- 2024-09-17 Thomas Richard New
[v2,2/5] gpio: Congatec Board Controller gpio driver Congatec Board Controller drivers - - 1 - --- 2024-09-17 Thomas Richard New
[v2,1/5] mfd: add Congatec Board Controller mfd driver Congatec Board Controller drivers - - - - --- 2024-09-17 Thomas Richard New
[v4,8/8] misc: add ge-addon-connector driver Add support for GE SUNH hot-pluggable connector - - - - --- 2024-09-17 Luca Ceresoli New
[RFC,v4,7/8] driver core: devlink: do not unblock consumers without any drivers found Add support for GE SUNH hot-pluggable connector - - - - --- 2024-09-17 Luca Ceresoli New
[v4,6/8] backlight: led-backlight: add devlink to supplier LEDs Add support for GE SUNH hot-pluggable connector - - - - --- 2024-09-17 Luca Ceresoli New
[v4,5/8] i2c: i2c-core-of: follow i2c-parent phandle to probe devices from added nodes Add support for GE SUNH hot-pluggable connector - - - - --- 2024-09-17 Luca Ceresoli New
[v4,4/8] drm/bridge: hotplug-bridge: add driver to support hot-pluggable DSI bridges Add support for GE SUNH hot-pluggable connector - - - - --- 2024-09-17 Luca Ceresoli New
[v4,3/8] drm/encoder: add drm_encoder_cleanup_from() Add support for GE SUNH hot-pluggable connector - - - - --- 2024-09-17 Luca Ceresoli New
[v4,2/8] drm/bridge: allow bridges to be informed about added and removed bridges Add support for GE SUNH hot-pluggable connector - - - - --- 2024-09-17 Luca Ceresoli New
[v4,1/8] dt-bindings: connector: add GE SUNH hotplug addon connector Add support for GE SUNH hot-pluggable connector - - - - --- 2024-09-17 Luca Ceresoli New
i2c: qcom-geni: Keep comment why interrupts start disabled i2c: qcom-geni: Keep comment why interrupts start disabled - 1 1 - --- 2024-09-16 Wolfram Sang New
[v2,11/11] i2c: isch: Convert to kernel-doc i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v2,10/11] i2c: isch: Prefer to use octal permission i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v2,09/11] i2c: isch: Don't use "proxy" headers i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v2,08/11] i2c: isch: Unify the name of the variable to hold an error code i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v2,07/11] i2c: isch: Use read_poll_timeout() i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v2,06/11] i2c: isch: Utilize temporary variable to hold device pointer i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v2,05/11] i2c: isch: switch i2c registration to devm functions i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v2,04/11] i2c: isch: Use custom private data structure i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v2,03/11] i2c: isch: Switch to memory mapped IO accessors i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v2,02/11] i2c: isch: Use string_choices API instead of ternary operator i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v2,01/11] i2c: isch: Pass pointer to struct i2c_adapter down i2c: isch: Put the driver into shape - - - - --- 2024-09-16 Andy Shevchenko cazzacarna Accepted
[v5,8/8] MAINTAINERS: Add AMD ASF driver entry Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-13 Shyam Sundar S K New
[v5,7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-13 Shyam Sundar S K New
[v5,6/8] i2c: amd-asf: Add routine to handle the ASF slave process Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-13 Shyam Sundar S K New
[v5,5/8] i2c: amd-asf: Add i2c_algorithm operations to support AMD ASF with SMBus Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-13 Shyam Sundar S K New
[v5,4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-13 Shyam Sundar S K New
[v5,3/8] i2c: piix4: Export i2c_piix4 driver functions as library Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-13 Shyam Sundar S K New
[v5,2/8] i2c: piix4: Move i2c_piix4 macros and structures to common header Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-13 Shyam Sundar S K New
[v5,1/8] i2c: piix4: Change the parameter list of piix4_transaction function Introduce initial AMD ASF Controller driver support - - 1 - --- 2024-09-13 Shyam Sundar S K New
[GIT,PULL] i2c-host for v6.12 [GIT,PULL] i2c-host for v6.12 - - - - --- 2024-09-13 Andi Shyti New
[v4,2/2] pca954x: Reset if channel select fails pca954x: Add DT bindings and driver changes for reset after timeout - - - - --- 2024-09-13 Wojciech Siudy (Nokia) New
[v4,1/2] dt-bindings: i2c: pca954x: Add timeout reset property pca954x: Add DT bindings and driver changes for reset after timeout - - - - --- 2024-09-13 Wojciech Siudy (Nokia) New
[v3,6/6] i2c: npcm: Enable slave in eob interrupt i2c: npcm: Bug fixes read/write operation, checkpatch - - 1 - --- 2024-09-13 Tyrone Ting New
[v3,5/6] i2c: npcm: use i2c frequency table i2c: npcm: Bug fixes read/write operation, checkpatch - - 1 - --- 2024-09-13 Tyrone Ting New
[v3,4/6] i2c: npcm: Modify the client address assignment i2c: npcm: Bug fixes read/write operation, checkpatch - - 1 - --- 2024-09-13 Tyrone Ting New
[v3,3/6] i2c: npcm: Modify timeout evaluation mechanism i2c: npcm: Bug fixes read/write operation, checkpatch - - 1 - --- 2024-09-13 Tyrone Ting New
[v3,2/6] i2c: npcm: use a software flag to indicate a BER condition i2c: npcm: Bug fixes read/write operation, checkpatch - - 1 - --- 2024-09-13 Tyrone Ting New
[v3,1/6] i2c: npcm: correct the read/write operation procedure i2c: npcm: Bug fixes read/write operation, checkpatch - - 1 - --- 2024-09-13 Tyrone Ting New
[GIT,PULL] i2c-host-fixes for v6.11-rc8 [GIT,PULL] i2c-host-fixes for v6.11-rc8 - - - - --- 2024-09-13 Andi Shyti New
[v3,2/2] pca954x: Reset if channel select fails pca954x: Add DT bindings and driver changes for reset after timeout - - - - --- 2024-09-13 Wojciech Siudy (Nokia) cazzacarna Superseded
[v3,1/2] dt-bindings: i2c: pca954x: Add timeout reset property pca954x: Add DT bindings and driver changes for reset after timeout - - - - --- 2024-09-13 Wojciech Siudy (Nokia) cazzacarna Superseded
[v11] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled [v11] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled 1 1 2 - --- 2024-09-13 Liu Kimriver/刘金河 New
[21/21] MAINTAINERS: add adi sc5xx maintainers Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[20/21] arm64: defconfig: sc598 add minimal changes Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[19/21] arm64: dts: adi: sc598: add device tree Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[18/21] dt-bindings: serial: adi,uart4: add adi,uart4 driver documentation Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[17/21] serial: adi,uart: Add driver for ADI ADSP-SC5xx Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[16/21] dt-bindings: i2c: add i2c/twi driver documentation Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[15/21] i2c: Add driver for ADI ADSP-SC5xx platforms Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[14/21] dt-bindings: pinctrl: adi,adsp-pinctrl: add bindings Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[13/21] pinctrl: Add drivers for ADI ADSP-SC5xx platform Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[12/21] dt-bindings: irqchip: adi,adsp-pint: add binding Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[11/21] irqchip: Add irqchip for ADI ADSP-SC5xx platform Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[10/21] dt-bindings: gpio: adi,adsp-port-gpio: add bindings Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[09/21] gpio: add driver for ADI ADSP-SC5xx platform Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[08/21] dt-bindings: clock: adi,sc5xx-clocks: add bindings Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[07/21] clock: Add driver for ADI ADSP-SC5xx clock Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[06/21] include: dt-binding: clock: add adi clock header file Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[05/21] clock:Add driver for ADI ADSP-SC5xx PLL Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[04/21] dt-bindings: arm64: adi,sc598: Add ADSP-SC598 SoC bindings Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[03/21] dt-bindigs: arm64: adi,sc598 bindings Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[02/21] reset: Add driver for ADI ADSP-SC5xx reset controller Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[01/21] arm64: Add ADI ADSP-SC598 SoC Adding support of ADI ARMv8 ADSP-SC598 SoC. - - - - --- 2024-09-12 Arturs Artamonovs via B4 Relay New
[v1,1/1] i2c: synquacer: Fix clock rate retrieval code [v1,1/1] i2c: synquacer: Fix clock rate retrieval code - 1 - - --- 2024-09-12 Andy Shevchenko cazzacarna Superseded
[v2] i2ctransfer: Drop redundant variable arg_idx [v2] i2ctransfer: Drop redundant variable arg_idx - - 1 1 --- 2024-09-12 Jean Delvare New
i2c/synquacer: Deal with optional PCLK correctly i2c/synquacer: Deal with optional PCLK correctly - 1 - - --- 2024-09-12 Ard Biesheuvel New
[V4] i2c: imx-lpi2c: add target mode support [V4] i2c: imx-lpi2c: add target mode support - - - - --- 2024-09-12 Carlos Song cazzacarna New
[v10] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled [v10] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled 1 1 2 - --- 2024-09-12 Liu Kimriver/刘金河 cazzacarna Needs Review / ACK
i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq() i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq() 1 1 1 - --- 2024-09-12 Jinjie Ruan cazzacarna Accepted
[v1,12/12] i2c: isch: Convert to kernel-doc i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,11/12] i2c: isch: Prefer to use octal permission i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,10/12] i2c: isch: Don't use "proxy" headers i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,09/12] i2c: isch: Unify the name of the variable to hold an error code i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,08/12] i2c: isch: Use read_poll_timeout() i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,07/12] i2c: isch: Utilize temporary variable to hold device pointer i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,06/12] i2c: isch: switch i2c registration to devm functions i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,05/12] i2c: isch: Use custom private data structure i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,04/12] i2c: isch: Switch to memory mapped IO accessors i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,03/12] i2c: isch: Use string_choices API instead of ternary operator i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,02/12] i2c: isch: Pass pointer to struct i2c_adapter down i2c: isch: Put the driver into shape - - - - --- 2024-09-11 Andy Shevchenko cazzacarna Superseded
[v1,01/12] i2c: isch: Add missed 'else' i2c: isch: Put the driver into shape - 1 - - --- 2024-09-11 Andy Shevchenko cazzacarna Accepted
[V3] i2c: imx-lpi2c: add target mode support [V3] i2c: imx-lpi2c: add target mode support - - - - --- 2024-09-11 Carlos Song wsa Superseded
[V5] i2c: imx-lpi2c: add eDMA mode support for LPI2C [V5] i2c: imx-lpi2c: add eDMA mode support for LPI2C - - - - --- 2024-09-11 Carlos Song cazzacarna New
[v4,8/8] MAINTAINERS: Add AMD ASF driver entry Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-11 Shyam Sundar S K cazzacarna Changes Requested
[v4,7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-11 Shyam Sundar S K cazzacarna Changes Requested
[v4,6/8] i2c: amd-asf: Add routine to handle the ASF slave process Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-11 Shyam Sundar S K cazzacarna Changes Requested
[v4,5/8] i2c: amd-asf: Add i2c_algorithm operations to support AMD ASF with SMBus Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-11 Shyam Sundar S K cazzacarna Changes Requested
[v4,4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-11 Shyam Sundar S K cazzacarna Changes Requested
[v4,3/8] i2c: piix4: Export i2c_piix4 driver functions as library Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-11 Shyam Sundar S K cazzacarna Changes Requested
[v4,2/8] i2c: piix4: Move i2c_piix4 macros and structures to common header Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-11 Shyam Sundar S K cazzacarna Changes Requested
[v4,1/8] i2c: piix4: Change the signature of piix4_transaction function Introduce initial AMD ASF Controller driver support - - - - --- 2024-09-11 Shyam Sundar S K cazzacarna Changes Requested
« 1 2 3 4195 196 »