diff mbox series

[v3,2/5] gpio: mvebu: improve pwm period calculation accuracy

Message ID a56e1e2a0ed2e9ce1ef7c9b336ab1b7c5efd2802.1610628807.git.baruch@tkos.co.il
State New
Headers show
Series gpio: mvebu: pwm fixes and improvements | expand

Commit Message

Baruch Siach Jan. 14, 2021, 6:57 p.m. UTC 
Change 'off' register value calculation from

  $off = (period - duty_cycle) * clkrate / NSEC_PER_SEC

to

  $off = (period * clkrate / NSEC_PER_SEC) - $on

That is, divide the full period value to reduce rounding error.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 drivers/gpio/gpio-mvebu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index a912a8fed197..c424d88e9e2b 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -715,9 +715,9 @@  static int mvebu_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	else
 		on = 1;
 
-	val = (unsigned long long) mvpwm->clk_rate *
-		(state->period - state->duty_cycle);
+	val = (unsigned long long) mvpwm->clk_rate * state->period;
 	do_div(val, NSEC_PER_SEC);
+	val -= on;
 	if (val > UINT_MAX)
 		return -EINVAL;
 	if (val)