diff mbox series

[RFC,03/14] dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible

Message ID 20241019-msm8917-v1-3-f1f3ca1d88e5@mainlining.org
State New
Headers show
Series Add MSM8917/PM8937/Redmi 5A | expand

Commit Message

Barnabás Czémán Oct. 19, 2024, 11:50 a.m. UTC
Document the Device Tree binding for PM8937 MPPs.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 2 ++
 1 file changed, 2 insertions(+)

Comments

Rob Herring Oct. 19, 2024, 1:21 p.m. UTC | #1
On Sat, 19 Oct 2024 13:50:40 +0200, Barnabás Czémán wrote:
> Document the Device Tree binding for PM8937 MPPs.
> 
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241019-msm8917-v1-3-f1f3ca1d88e5@mainlining.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 43146709e2044d9dead08a6786b98672ef766629..9364ae05f3e68f3a2f4dd78ba3c0f94b3ccc3c51 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -22,6 +22,7 @@  properties:
               - qcom,pm8226-mpp
               - qcom,pm8841-mpp
               - qcom,pm8916-mpp
+              - qcom,pm8937-mpp
               - qcom,pm8941-mpp
               - qcom,pm8950-mpp
               - qcom,pmi8950-mpp
@@ -92,6 +93,7 @@  $defs:
           this subnode.  Valid pins are
                  - mpp1-mpp4 for pm8841
                  - mpp1-mpp4 for pm8916
+                 - mpp1-mpp4 for pm8937
                  - mpp1-mpp8 for pm8941
                  - mpp1-mpp4 for pm8950
                  - mpp1-mpp4 for pmi8950