| Message ID | 20240912-test-v1-12-458fa57c8ccf@analog.com |
|---|---|
| State | New |
| Headers | show |
| Series | Adding support of ADI ARMv8 ADSP-SC598 SoC. | expand |
On 12/09/2024 20:24, Arturs Artamonovs via B4 Relay wrote: > From: Arturs Artamonovs <arturs.artamonovs@analog.com> > You must always run checkpatch. We cannot take empty commit msgs, for obvious reasons. A nit, subject: drop second/last, redundant "bindings". The "dt-bindings" prefix is already stating that these are bindings. See also: https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18 Instead describe the hardware. > Signed-off-by: Arturs Artamonovs <Arturs.Artamonovs@analog.com> > Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> > Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> > Co-developed-by: Greg Malysa <greg.malysa@timesys.com> > Signed-off-by: Greg Malysa <greg.malysa@timesys.com> > --- > .../interrupt-controller/adi,adsp-pint.yaml | 51 ++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml b/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml > new file mode 100644 > index 0000000000000000000000000000000000000000..b5ecf0cf1d2ceb580f45467ffe1550ae3280d1a3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/interrupt-controller/adi,adsp-pint.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices Port Pin Interrupt for SC5XX-family processors > + > +maintainers: > + - Arturs Artamonovs <arturs.artamonovs@analog.com> > + - Utsav Agarwal <Utsav.Agarwal@analog.com> > + > +description: | > + Analog Devices Port Pin Interrupt driver for SC5XX-family processors > + > +properties: > + compatible: > + enum: > + - adi,adsp-pint All previous comments apply. > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/clock/adi-sc5xx-clock.h> Where do you user it? > + > + pint0: pint@31005000 { > + compatible = "adi,adsp-pint"; > + reg = <0x31005000 0xFF>; > + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; > + }; > + All previous comments apply. > + pint1: pint@31005100 { > + compatible = "adi,adsp-pint"; > + reg = <0x31005100 0xFF>; > + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; > + }; > +... > Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml b/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml new file mode 100644 index 0000000000000000000000000000000000000000..b5ecf0cf1d2ceb580f45467ffe1550ae3280d1a3 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/adi,adsp-pint.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices Port Pin Interrupt for SC5XX-family processors + +maintainers: + - Arturs Artamonovs <arturs.artamonovs@analog.com> + - Utsav Agarwal <Utsav.Agarwal@analog.com> + +description: | + Analog Devices Port Pin Interrupt driver for SC5XX-family processors + +properties: + compatible: + enum: + - adi,adsp-pint + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/adi-sc5xx-clock.h> + + pint0: pint@31005000 { + compatible = "adi,adsp-pint"; + reg = <0x31005000 0xFF>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + }; + + pint1: pint@31005100 { + compatible = "adi,adsp-pint"; + reg = <0x31005100 0xFF>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + }; +...