| Message ID | 20240903220240.2594102-14-quic_nkela@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2,01/21] dt-bindings: arm: qcom: add the SoC ID for SA8255P | expand |
On Tue, 03 Sep 2024 15:02:32 -0700, Nikunj Kela wrote: > Add compatible for TLMM block representing support on SA8255p. > > SA8255p uses the same TLMM block as SA8775p however the ownership > of pins are split between Firmware VM and Linux VM on SA8255p. For > example, pins used by UART are owned and configured by Firmware VM > while pins used by ethernet are owned and configured by Linux VM. > Therefore, adding a sa8255p specific compatible to mark the difference. > > Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> > --- > .../devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml:22:9: [warning] wrong indentation: expected 10 but found 8 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml:23:11: [warning] wrong indentation: expected 12 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml:26:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240903220240.2594102-14-quic_nkela@quicinc.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml index e9abbf2c0689..b36b29dd3128 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -17,7 +17,13 @@ allOf: properties: compatible: - const: qcom,sa8775p-tlmm + oneOf: + - items: + - enum: + - qcom,sa8255p-tlmm + - const: qcom,sa8775p-tlmm + - items: + - const: qcom,sa8775p-tlmm reg: maxItems: 1
Add compatible for TLMM block representing support on SA8255p. SA8255p uses the same TLMM block as SA8775p however the ownership of pins are split between Firmware VM and Linux VM on SA8255p. For example, pins used by UART are owned and configured by Firmware VM while pins used by ethernet are owned and configured by Linux VM. Therefore, adding a sa8255p specific compatible to mark the difference. Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> --- .../devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)