diff mbox series

[3/5] ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node

Message ID 20240624100431.191172-4-manikandan.m@microchip.com
State New
Headers show
Series Convert Atmel PIO3 Pinctrl and GPIO bindings to yaml | expand

Commit Message

Manikandan Muralidharan June 24, 2024, 10:04 a.m. UTC 
The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the "atmel,at91sam9x5-gpio" compatible from
sam9x60 SoC DT.

Note: The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string
to find the number of active GPIO banks and identify the pinmux nodes.It
should used as a constant across all DT for GPIO node banks that uses PIO3
based pinctrl driver

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
 arch/arm/boot/dts/microchip/sam9x60.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 797855e78058..db2ddff872d2 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -1236,7 +1236,7 @@  pinctrl: pinctrl@fffff400 {
 						 >;
 
 				pioA: gpio@fffff400 {
-					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
 					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
@@ -1247,7 +1247,7 @@  pioA: gpio@fffff400 {
 				};
 
 				pioB: gpio@fffff600 {
-					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x200>;
 					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
@@ -1259,7 +1259,7 @@  pioB: gpio@fffff600 {
 				};
 
 				pioC: gpio@fffff800 {
-					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x200>;
 					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
@@ -1270,7 +1270,7 @@  pioC: gpio@fffff800 {
 				};
 
 				pioD: gpio@fffffa00 {
-					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffffa00 0x200>;
 					interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;