| Message ID | 20240620-mbly-olb-v3-2-5f29f8ca289c@bootlin.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add Mobileye EyeQ system controller support (clk, reset, pinctrl) | expand |
On Thu, 20 Jun 2024 19:30:54 +0200, Théo Lebrun wrote: > Switch from one sub-node per functionality in the system-controller to a > single node representing the entire OLB instance. This is the > recommended approach for controllers handling many different > functionalities; it is a single controller and should be represented by > a single devicetree node. > > The reset bindings is removed and all properties will be described by: > soc/mobileye/mobileye,eyeq5-olb.yaml > > Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> > --- > .../bindings/reset/mobileye,eyeq5-reset.yaml | 43 ---------------------- > 1 file changed, 43 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/sound/st,stm32-sai.example.dtb: /example-0/sai@4400b000/audio-controller@4400b004: failed to match any schema with compatible: ['st,stm32-sai-sub-a'] Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dtb: /example-0/remoteproc@cd00000: failed to match any schema with compatible: ['qcom,ipq8074-wcss-pil'] Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart'] Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy'] /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/stm32/st,mlahb.example.dtb: ahb@38000000: Unevaluated properties are not allowed ('reg' was unexpected) from schema $id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240620-mbly-olb-v3-2-5f29f8ca289c@bootlin.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Thu, Jun 20, 2024 at 12:26:57PM -0600, Rob Herring (Arm) wrote: > > On Thu, 20 Jun 2024 19:30:54 +0200, Théo Lebrun wrote: > > Switch from one sub-node per functionality in the system-controller to a > > single node representing the entire OLB instance. This is the > > recommended approach for controllers handling many different > > functionalities; it is a single controller and should be represented by > > a single devicetree node. > > > > The reset bindings is removed and all properties will be described by: > > soc/mobileye/mobileye,eyeq5-olb.yaml > > > > Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> > > --- > > .../bindings/reset/mobileye,eyeq5-reset.yaml | 43 ---------------------- > > 1 file changed, 43 deletions(-) > > > > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Documentation/devicetree/bindings/sound/st,stm32-sai.example.dtb: /example-0/sai@4400b000/audio-controller@4400b004: failed to match any schema with compatible: ['st,stm32-sai-sub-a'] > Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dtb: /example-0/remoteproc@cd00000: failed to match any schema with compatible: ['qcom,ipq8074-wcss-pil'] > Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd'] > Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd'] > Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart'] > Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy'] > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/stm32/st,mlahb.example.dtb: ahb@38000000: Unevaluated properties are not allowed ('reg' was unexpected) > from schema $id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml# Not sure what happened here, but this can be ignored. Rob
On Thu, 20 Jun 2024 19:30:54 +0200, Théo Lebrun wrote: > Switch from one sub-node per functionality in the system-controller to a > single node representing the entire OLB instance. This is the > recommended approach for controllers handling many different > functionalities; it is a single controller and should be represented by > a single devicetree node. > > The reset bindings is removed and all properties will be described by: > soc/mobileye/mobileye,eyeq5-olb.yaml > > Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> > --- > .../bindings/reset/mobileye,eyeq5-reset.yaml | 43 ---------------------- > 1 file changed, 43 deletions(-) > Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml b/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml deleted file mode 100644 index 062b4518347b..000000000000 --- a/Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml +++ /dev/null @@ -1,43 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/reset/mobileye,eyeq5-reset.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mobileye EyeQ5 reset controller - -description: - The EyeQ5 reset driver handles three reset domains. Its registers live in a - shared region called OLB. - -maintainers: - - Grégory Clement <gregory.clement@bootlin.com> - - Théo Lebrun <theo.lebrun@bootlin.com> - - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> - -properties: - compatible: - const: mobileye,eyeq5-reset - - reg: - maxItems: 3 - - reg-names: - items: - - const: d0 - - const: d1 - - const: d2 - - "#reset-cells": - const: 2 - description: - The first cell is the domain (0 to 2 inclusive) and the second one is the - reset index inside that domain. - -required: - - compatible - - reg - - reg-names - - "#reset-cells" - -additionalProperties: false
Switch from one sub-node per functionality in the system-controller to a single node representing the entire OLB instance. This is the recommended approach for controllers handling many different functionalities; it is a single controller and should be represented by a single devicetree node. The reset bindings is removed and all properties will be described by: soc/mobileye/mobileye,eyeq5-olb.yaml Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> --- .../bindings/reset/mobileye,eyeq5-reset.yaml | 43 ---------------------- 1 file changed, 43 deletions(-)