From patchwork Tue Oct 18 16:01:28 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 1691618 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=thGEcwbO; dkim-atps=neutral Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4MsJWn0qf7z23kT for ; Wed, 19 Oct 2022 03:01:41 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230177AbiJRQBi (ORCPT ); Tue, 18 Oct 2022 12:01:38 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33154 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229893AbiJRQBh (ORCPT ); Tue, 18 Oct 2022 12:01:37 -0400 Received: from mail-qv1-xf2f.google.com (mail-qv1-xf2f.google.com [IPv6:2607:f8b0:4864:20::f2f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A40516C94D for ; Tue, 18 Oct 2022 09:01:34 -0700 (PDT) Received: by mail-qv1-xf2f.google.com with SMTP id g9so9551857qvo.12 for ; Tue, 18 Oct 2022 09:01:34 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=NYSH+KPKLXF3i3ygsViuEOSPQEPRdZv4UiHjICkxwls=; b=thGEcwbOeaF7eskjiVnpkNrilR4NHeY/TXyJUMbM1FWzRCG/44z+0Xfku4kJtYwGzi NlX1YUygVwSp6xTZUE78TfNlQ8X7+N9AqeIlLqnYkB9yv0pMpkJRiCYR12f4Bcrly36Z JZgxSu88t11k50JhBy0ZyPEh7Z1vF5Fk8SV3/I5zSYYpZU5qI6hPIJOOZCATexRG6ilX fkd3d7mRytpfXvtZJsV688nLi7asAv4xnALA/bjQ+GkFgKnOlxX8hDy3beJ+S4VICBqQ orkX0mlxGhl951laIrCMEJciweBSb8rvowOdCLqYHhdb2dWkgc3mpG06egn21VCTsueV uQKA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=NYSH+KPKLXF3i3ygsViuEOSPQEPRdZv4UiHjICkxwls=; b=Hn3/uzL/3TmM8Rrgs9ndwgZs0T4x93N5DexmnT9p5qdxgUmfVshkpEPoKJK+d493Fz OymW4a3ltmyt53iS8vbtHi8NVJ8++YMEcdXJ2JlMq/P/qQrF5BzxBpL0ZjX6jxyostJC 2CriPLBdUUL56rDaiMWrf8Ub9IZIXkGaTeSL7UZzv+6pSELr2/DHnIMCf/i6XAYKiT8g Yke2se9fadMr221qciqKk0AudQKXIskIuu4Ylf8mPPcnhWAUDEV/r5W107MAH/BvZH/u 6bKZpP2MUtPPXmAYr1ixGM110rcIB4Lz2zFvkglLCvhE2mbOfWM5ztJx9Fbxp+bkWPfX JVGg== X-Gm-Message-State: ACrzQf13GK/MQ88RqRIPE9Yv2WG4WQUz7yCtdjNyun5eanildM0pkXQb gbcE5LZwPgrMiNfP5MiPO775OQ== X-Google-Smtp-Source: AMsMyM4DkeSpsFPhzR6vZsewN0ZeqmsG+ToDtJDq5Y45ZvYuCUnUSeXEgCDvCo2G0CH+qnVsHITY4Q== X-Received: by 2002:a05:6214:20a6:b0:4b4:32a9:6c96 with SMTP id 6-20020a05621420a600b004b432a96c96mr2601091qvd.63.1666108893283; Tue, 18 Oct 2022 09:01:33 -0700 (PDT) Received: from krzk-bin.MSRM (pool-72-83-177-149.washdc.east.verizon.net. [72.83.177.149]) by smtp.gmail.com with ESMTPSA id y4-20020a37e304000000b006b5cc25535fsm2469389qki.99.2022.10.18.09.01.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 Oct 2022 09:01:32 -0700 (PDT) From: Krzysztof Kozlowski To: Bjorn Andersson , Andy Gross , Konrad Dybcio , Linus Walleij , Rob Herring , Krzysztof Kozlowski , linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski , Rob Herring Subject: [PATCH v2] dt-bindings: pinctrl: qcom,sm8150: convert to dtschema Date: Tue, 18 Oct 2022 12:01:28 -0400 Message-Id: <20221018160128.51851-1-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 MIME-Version: 1.0 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE, SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Convert Qualcomm SM8150 pin controller bindings to DT schema. Keep the parsing of pin configuration subnodes consistent with other Qualcomm schemas (children named with '-state' suffix, their children with '-pins'). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Bjorn Andersson Reviewed-by: Rob Herring --- Changes since v1: 1. Add tags. 2. Drop drive-strength (included by common TLMM node). --- .../bindings/pinctrl/qcom,sm8150-pinctrl.txt | 190 ------------------ .../bindings/pinctrl/qcom,sm8150-pinctrl.yaml | 173 ++++++++++++++++ 2 files changed, 173 insertions(+), 190 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt deleted file mode 100644 index fa37733e5102..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt +++ /dev/null @@ -1,190 +0,0 @@ -Qualcomm SM8150 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -QCS404 platform. - -- compatible: - Usage: required - Value type: - Definition: must be "qcom,sm8150-pinctrl" - -- reg: - Usage: required - Value type: - Definition: the base address and size of the north, south, west - and east TLMM tiles. - -- reg-names: - Usage: required - Value type: - Defintiion: names for the cells of reg, must contain "north", "south" - "west" and "east". - -- interrupts: - Usage: required - Value type: - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: - Definition: must be 2. Specifying the pin number and flags, as defined - in - -- gpio-controller: - Usage: required - Value type: - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: - Definition: must be 2. Specifying the pin number and flags, as defined - in - -- gpio-ranges: - Usage: required - Value type: - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Value type: - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, - atest_char0, atest_char1, atest_char2, atest_char3, - audio_ref, atest_usb1, atest_usb2, atest_usb10, - atest_usb11, atest_usb12, atest_usb13, atest_usb20, - atest_usb21, atest_usb22, atest_usb2, atest_usb23, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, - cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, - ddr_pxi0, ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, - emac_phy, emac_pps, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - hs1_mi2s, hs2_mi2s, hs3_mi2s, jitter_bist, - lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, - mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, - pa_indicator, pci_e0, phase_flag, pll_bypassnl, - pll_bist, pci_e1, pll_reset, pri_mi2s, pri_mi2s_ws, - prng_rosc, qdss, qdss_cti, qlink_request, qlink_enable, - qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qua_mi2s, - qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8, - qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, - qup17, qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, - sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, ter_mi2s, - tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, - tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, - usb2phy_ac, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, - wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset - -- bias-disable: - Usage: optional - Value type: - Definition: The specified pins should be configued as no pull. - -- bias-pull-down: - Usage: optional - Value type: - Definition: The specified pins should be configued as pull down. - -- bias-pull-up: - Usage: optional - Value type: - Definition: The specified pins should be configued as pull up. - -- output-high: - Usage: optional - Value type: - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3000000 { - compatible = "qcom,sm8150-pinctrl"; - reg = <0x03100000 0x300000>, - <0x03500000 0x300000>, - <0x03900000 0x300000>, - <0x03D00000 0x300000>; - reg-names = "west", "east", "north", "south"; - interrupts = ; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 175>; - gpio-reserved-ranges = <0 4>, <126 4>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml new file mode 100644 index 000000000000..85adddbdee56 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8150-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 TLMM pin controller + +maintainers: + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8150 SoC. + +properties: + compatible: + const: qcom,sm8150-pinctrl + + reg: + maxItems: 4 + + reg-names: + items: + - const: west + - const: east + - const: north + - const: south + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 88 + + gpio-line-names: + maxItems: 175 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8150-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8150-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8150-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, audio_ref, + atest_usb1, atest_usb2, atest_usb10, atest_usb11, atest_usb12, + atest_usb13, atest_usb20, atest_usb21, atest_usb22, atest_usb2, + atest_usb23, btfm_slimbus, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, emac_phy, emac_pps, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s, + jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, + pci_e0, phase_flag, pll_bypassnl, pll_bist, pci_e1, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, + qlink_request, qlink_enable, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qua_mi2s, qup0, qup1, qup2, qup3, qup4, + qup5, qup6, qup7, qup8, qup9, qup10, qup11, qup12, qup13, + qup14, qup15, qup16, qup17, qup18, qup19, qup_l4, qup_l5, + qup_l6, rgmii, sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, + ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, usb2phy_ac, + usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, wmss_reset ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + #include + + tlmm: pinctrl@3100000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x03100000 0x300000>, + <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03d00000 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = ; + gpio-ranges = <&tlmm 0 0 176>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <6>; + bias-disable; + }; + + pcie1-default-state { + perst-pins { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio103"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + };