@@ -126,37 +126,37 @@ patternProperties:
examples:
- |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- pinctrl@3100000 {
- compatible = "qcom,sc8180x-tlmm";
- reg = <0x03100000 0x300000>,
- <0x03500000 0x700000>,
- <0x03d00000 0x300000>;
- reg-names = "west", "east", "south";
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 190>;
-
- gpio-wo-subnode-state {
- pins = "gpio1";
- function = "gpio";
- };
-
- uart-w-subnodes-state {
- rx-pins {
- pins = "gpio4";
- function = "qup6";
- bias-pull-up;
- };
-
- tx-pins {
- pins = "gpio5";
- function = "qup6";
- bias-disable;
- };
- };
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@3100000 {
+ compatible = "qcom,sc8180x-tlmm";
+ reg = <0x03100000 0x300000>,
+ <0x03500000 0x700000>,
+ <0x03d00000 0x300000>;
+ reg-names = "west", "east", "south";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 190>;
+
+ gpio-wo-subnode-state {
+ pins = "gpio1";
+ function = "gpio";
};
+
+ uart-w-subnodes-state {
+ rx-pins {
+ pins = "gpio4";
+ function = "qup6";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio5";
+ function = "qup6";
+ bias-disable;
+ };
+ };
+ };
...
Bindings example should be indented with 4-spaces. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../pinctrl/qcom,sc8180x-pinctrl.yaml | 64 +++++++++---------- 1 file changed, 32 insertions(+), 32 deletions(-)