@@ -21,8 +21,8 @@
#define PLL_VF610_NUM_OFFSET 0x20
#define PLL_VF610_DENOM_OFFSET 0x30
-#define BM_PLL_POWER (0x1 << 12)
#define BM_PLL_LOCK (0x1 << 31)
+#define BM_PLL_LOCK_V2 (0x1 << 29)
#define IMX7_ENET_PLL_POWER (0x1 << 5)
#define IMX7_DDR_PLL_POWER (0x1 << 20)
@@ -34,6 +34,7 @@
* @base: base address of PLL registers
* @power_bit: pll power bit mask
* @powerup_set: set power_bit to power up the PLL
+ * @lock_bit: pll lock bit mask
* @div_mask: mask of divider bits
* @div_shift: shift of divider bits
* @ref_clock: reference clock rate
@@ -48,6 +49,7 @@ struct clk_pllv3 {
void __iomem *base;
u32 power_bit;
bool powerup_set;
+ u32 lock_bit;
u32 div_mask;
u32 div_shift;
unsigned long ref_clock;
@@ -65,7 +67,7 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
return 0;
- return readl_relaxed_poll_timeout(pll->base, val, val & BM_PLL_LOCK,
+ return readl_relaxed_poll_timeout(pll->base, val, val & pll->lock_bit,
500, PLL_LOCK_TIMEOUT);
}
@@ -101,7 +103,7 @@ static int clk_pllv3_is_prepared(struct clk_hw *hw)
{
struct clk_pllv3 *pll = to_clk_pllv3(hw);
- if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+ if (readl_relaxed(pll->base) & pll->lock_bit)
return 1;
return 0;
@@ -155,6 +157,39 @@ static const struct clk_ops clk_pllv3_ops = {
.set_rate = clk_pllv3_set_rate,
};
+static int clk_pllv3_genericv2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val, div;
+
+ div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask;
+ val = (div == 0) ? parent_rate * 22 : parent_rate * 20;
+
+ if (rate == val)
+ return 0;
+
+ return -EINVAL;
+}
+
+static unsigned long clk_pllv3_genericv2_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask;
+
+ return (div == 0) ? parent_rate * 22 : parent_rate * 20;
+}
+
+static const struct clk_ops clk_pllv3_genericv2_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
+ .recalc_rate = clk_pllv3_genericv2_recalc_rate,
+ .round_rate = clk_pllv3_round_rate,
+ .set_rate = clk_pllv3_genericv2_set_rate,
+};
+
static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -407,9 +442,9 @@ static const struct clk_ops clk_pllv3_enet_ops = {
.recalc_rate = clk_pllv3_enet_recalc_rate,
};
-struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
+struct clk_hw *__imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
const char *parent_name, void __iomem *base,
- u32 div_mask)
+ u32 div_mask, u8 pwr_bit)
{
struct clk_pllv3 *pll;
const struct clk_ops *ops;
@@ -421,11 +456,21 @@ struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
if (!pll)
return ERR_PTR(-ENOMEM);
- pll->power_bit = BM_PLL_POWER;
+ pll->power_bit = pwr_bit;
+ pll->lock_bit = BM_PLL_LOCK;
pll->num_offset = PLL_NUM_OFFSET;
pll->denom_offset = PLL_DENOM_OFFSET;
switch (type) {
+ case IMX_PLLV3_GENERICV2:
+ pll->lock_bit = BM_PLL_LOCK_V2;
+ pll->powerup_set = true;
+ ops = &clk_pllv3_genericv2_ops;
+ break;
+ case IMX_PLLV3_SYSV2:
+ pll->lock_bit = BM_PLL_LOCK_V2;
+ pll->powerup_set = true;
+ fallthrough;
case IMX_PLLV3_SYS:
ops = &clk_pllv3_sys_ops;
break;
@@ -6,6 +6,8 @@
#include <linux/spinlock.h>
#include <linux/clk-provider.h>
+#define BM_PLL_POWER BIT(12)
+
extern spinlock_t imx_ccm_lock;
extern bool mcore_booted;
@@ -102,6 +104,9 @@ extern struct imx_fracn_gppll_clk imx_fracn_gppll;
to_clk(clk_hw_register_gate2(dev, name, parent_name, flags, reg, bit_idx, \
cgr_val, cgr_mask, clk_gate_flags, lock, share_count))
+#define imx_clk_hw_pllv3(type, name, parent_name, base, div_mask) \
+ __imx_clk_hw_pllv3(type, name, parent_name, base, div_mask, BM_PLL_POWER)
+
#define imx_clk_pllv3(type, name, parent_name, base, div_mask) \
to_clk(imx_clk_hw_pllv3(type, name, parent_name, base, div_mask))
@@ -242,6 +247,8 @@ struct clk_hw *imx_clk_hw_sscg_pll(const char *name,
enum imx_pllv3_type {
IMX_PLLV3_GENERIC,
+ IMX_PLLV3_GENERICV2,
+ IMX_PLLV3_SYSV2,
IMX_PLLV3_SYS,
IMX_PLLV3_USB,
IMX_PLLV3_USB_VF610,
@@ -253,8 +260,8 @@ enum imx_pllv3_type {
IMX_PLLV3_AV_IMX7,
};
-struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
- const char *parent_name, void __iomem *base, u32 div_mask);
+struct clk_hw *__imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base, u32 div_mask, u8 pwr_bit);
#define PLL_1416X_RATE(_rate, _m, _p, _s) \
{ \
The i.MXRT1170 has a pll that has the multiplier bits inverted and cannot be changed add IMX_PLLV3_GENERICV2. The i.MXRT1170 also has the lock bit moved as well as the power bit inverted the power bit also is in different locations on each pll control register. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> --- V1 -> V2: - Nothing done V2 -> V3: - Nothing done V3 -> V4: - Nothing done V4 -> V5: - Add __imx_clk_hw_pllv3 to change power bit - Add BM_PLL_POWER and imx_clk_hw_pllv3 to header - Remove imx_clk_hw_pll3_powerbit V5 -> V6: - Fix __imx_clk_hw_pllv3 deffintion - Fix imx_clk_hw_pllv3 macro - Remove imx_clk_hw_pll3_powerbit --- drivers/clk/imx/clk-pllv3.c | 57 +++++++++++++++++++++++++++++++++---- drivers/clk/imx/clk.h | 11 +++++-- 2 files changed, 60 insertions(+), 8 deletions(-)