Message ID | 20211109100207.2474024-5-arnd@kernel.org |
---|---|
State | New |
Headers | show |
Series | gpiolib header cleanup | expand |
On Tue, Nov 09, 2021 at 11:02:03AM +0100, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > The asm-generic/gpio.h file is now always included when > using gpiolib, so just move its contents into linux/gpio.h > with a few minor simplifications. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- > arch/m68k/include/asm/mcfgpio.h | 2 +- > drivers/gpio/gpio-davinci.c | 3 +- > drivers/pinctrl/core.c | 2 +- > include/asm-generic/gpio.h | 172 -------------------------------- > include/linux/gpio.h | 116 +++++++++++++++++++-- For these three Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > 5 files changed, 110 insertions(+), 185 deletions(-) > delete mode 100644 include/asm-generic/gpio.h > > diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h > index 27f32cc81da6..2cefe8445980 100644 > --- a/arch/m68k/include/asm/mcfgpio.h > +++ b/arch/m68k/include/asm/mcfgpio.h > @@ -9,7 +9,7 @@ > #define mcfgpio_h > > #ifdef CONFIG_GPIOLIB > -#include <asm-generic/gpio.h> > +#include <linux/gpio.h> > #else > > int __mcfgpio_get_value(unsigned gpio); > diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c > index cb5afaa7ed48..8122c3a8d659 100644 > --- a/drivers/gpio/gpio-davinci.c > +++ b/drivers/gpio/gpio-davinci.c > @@ -7,6 +7,7 @@ > */ > > #include <linux/gpio/driver.h> > +#include <linux/gpio.h> > #include <linux/errno.h> > #include <linux/kernel.h> > #include <linux/clk.h> > @@ -23,8 +24,6 @@ > #include <linux/irqchip/chained_irq.h> > #include <linux/spinlock.h> > > -#include <asm-generic/gpio.h> > - > #define MAX_REGS_BANKS 5 > #define MAX_INT_PER_BANK 32 > > diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c > index ffe39336fcac..976607758e98 100644 > --- a/drivers/pinctrl/core.c > +++ b/drivers/pinctrl/core.c > @@ -28,7 +28,7 @@ > > #ifdef CONFIG_GPIOLIB > #include "../gpio/gpiolib.h" > -#include <asm-generic/gpio.h> > +#include <linux/gpio.h> > #endif > > #include "core.h" > diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h > deleted file mode 100644 > index aea9aee1f3e9..000000000000 > --- a/include/asm-generic/gpio.h > +++ /dev/null > @@ -1,172 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -#ifndef _ASM_GENERIC_GPIO_H > -#define _ASM_GENERIC_GPIO_H > - > -#include <linux/types.h> > -#include <linux/errno.h> > - > -#ifdef CONFIG_GPIOLIB > - > -#include <linux/compiler.h> > -#include <linux/gpio/driver.h> > -#include <linux/gpio/consumer.h> > - > -/* Platforms may implement their GPIO interface with library code, > - * at a small performance cost for non-inlined operations and some > - * extra memory (for code and for per-GPIO table entries). > - * > - * While the GPIO programming interface defines valid GPIO numbers > - * to be in the range 0..MAX_INT, this library restricts them to the > - * smaller range 0..ARCH_NR_GPIOS-1. > - * > - * ARCH_NR_GPIOS is somewhat arbitrary; it usually reflects the sum of > - * builtin/SoC GPIOs plus a number of GPIOs on expanders; the latter is > - * actually an estimate of a board-specific value. > - */ > - > -#ifndef ARCH_NR_GPIOS > -#if defined(CONFIG_ARCH_NR_GPIO) && CONFIG_ARCH_NR_GPIO > 0 > -#define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO > -#else > -#define ARCH_NR_GPIOS 512 > -#endif > -#endif > - > -/* > - * "valid" GPIO numbers are nonnegative and may be passed to > - * setup routines like gpio_request(). only some valid numbers > - * can successfully be requested and used. > - * > - * Invalid GPIO numbers are useful for indicating no-such-GPIO in > - * platform data and other tables. > - */ > - > -static inline bool gpio_is_valid(int number) > -{ > - return number >= 0 && number < ARCH_NR_GPIOS; > -} > - > -struct device; > -struct gpio; > -struct seq_file; > -struct module; > -struct device_node; > -struct gpio_desc; > - > -/* caller holds gpio_lock *OR* gpio is marked as requested */ > -static inline struct gpio_chip *gpio_to_chip(unsigned gpio) > -{ > - return gpiod_to_chip(gpio_to_desc(gpio)); > -} > - > -/* Always use the library code for GPIO management calls, > - * or when sleeping may be involved. > - */ > -extern int gpio_request(unsigned gpio, const char *label); > -extern void gpio_free(unsigned gpio); > - > -static inline int gpio_direction_input(unsigned gpio) > -{ > - return gpiod_direction_input(gpio_to_desc(gpio)); > -} > -static inline int gpio_direction_output(unsigned gpio, int value) > -{ > - return gpiod_direction_output_raw(gpio_to_desc(gpio), value); > -} > - > -static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) > -{ > - return gpiod_set_debounce(gpio_to_desc(gpio), debounce); > -} > - > -static inline int gpio_get_value_cansleep(unsigned gpio) > -{ > - return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio)); > -} > -static inline void gpio_set_value_cansleep(unsigned gpio, int value) > -{ > - return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value); > -} > - > - > -/* A platform's <asm/gpio.h> code may want to inline the I/O calls when > - * the GPIO is constant and refers to some always-present controller, > - * giving direct access to chip registers and tight bitbanging loops. > - */ > -static inline int __gpio_get_value(unsigned gpio) > -{ > - return gpiod_get_raw_value(gpio_to_desc(gpio)); > -} > -static inline void __gpio_set_value(unsigned gpio, int value) > -{ > - return gpiod_set_raw_value(gpio_to_desc(gpio), value); > -} > - > -static inline int __gpio_cansleep(unsigned gpio) > -{ > - return gpiod_cansleep(gpio_to_desc(gpio)); > -} > - > -static inline int __gpio_to_irq(unsigned gpio) > -{ > - return gpiod_to_irq(gpio_to_desc(gpio)); > -} > - > -extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); > -extern int gpio_request_array(const struct gpio *array, size_t num); > -extern void gpio_free_array(const struct gpio *array, size_t num); > - > -/* > - * A sysfs interface can be exported by individual drivers if they want, > - * but more typically is configured entirely from userspace. > - */ > -static inline int gpio_export(unsigned gpio, bool direction_may_change) > -{ > - return gpiod_export(gpio_to_desc(gpio), direction_may_change); > -} > - > -static inline int gpio_export_link(struct device *dev, const char *name, > - unsigned gpio) > -{ > - return gpiod_export_link(dev, name, gpio_to_desc(gpio)); > -} > - > -static inline void gpio_unexport(unsigned gpio) > -{ > - gpiod_unexport(gpio_to_desc(gpio)); > -} > - > -#else /* !CONFIG_GPIOLIB */ > - > -#include <linux/kernel.h> > - > -static inline bool gpio_is_valid(int number) > -{ > - /* only non-negative numbers are valid */ > - return number >= 0; > -} > - > -/* platforms that don't directly support access to GPIOs through I2C, SPI, > - * or other blocking infrastructure can use these wrappers. > - */ > - > -static inline int gpio_cansleep(unsigned gpio) > -{ > - return 0; > -} > - > -static inline int gpio_get_value_cansleep(unsigned gpio) > -{ > - might_sleep(); > - return __gpio_get_value(gpio); > -} > - > -static inline void gpio_set_value_cansleep(unsigned gpio, int value) > -{ > - might_sleep(); > - __gpio_set_value(gpio, value); > -} > - > -#endif /* !CONFIG_GPIOLIB */ > - > -#endif /* _ASM_GENERIC_GPIO_H */ > diff --git a/include/linux/gpio.h b/include/linux/gpio.h > index 7e6b1b8277ca..c19256f67e02 100644 > --- a/include/linux/gpio.h > +++ b/include/linux/gpio.h > @@ -54,26 +54,124 @@ struct gpio { > }; > > #ifdef CONFIG_GPIOLIB > -#include <asm-generic/gpio.h> > > -static inline int gpio_get_value(unsigned int gpio) > +#include <linux/compiler.h> > +#include <linux/gpio/driver.h> > +#include <linux/gpio/consumer.h> > + > +/* Platforms may implement their GPIO interface with library code, > + * at a small performance cost for non-inlined operations and some > + * extra memory (for code and for per-GPIO table entries). > + * > + * While the GPIO programming interface defines valid GPIO numbers > + * to be in the range 0..MAX_INT, this library restricts them to the > + * smaller range 0..ARCH_NR_GPIOS-1. > + * > + * ARCH_NR_GPIOS is somewhat arbitrary; it usually reflects the sum of > + * builtin/SoC GPIOs plus a number of GPIOs on expanders; the latter is > + * actually an estimate of a board-specific value. > + */ > + > +#ifndef ARCH_NR_GPIOS > +#if defined(CONFIG_ARCH_NR_GPIO) && CONFIG_ARCH_NR_GPIO > 0 > +#define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO > +#else > +#define ARCH_NR_GPIOS 512 > +#endif > +#endif > + > +/* > + * "valid" GPIO numbers are nonnegative and may be passed to > + * setup routines like gpio_request(). only some valid numbers > + * can successfully be requested and used. > + * > + * Invalid GPIO numbers are useful for indicating no-such-GPIO in > + * platform data and other tables. > + */ > + > +static inline bool gpio_is_valid(int number) > { > - return __gpio_get_value(gpio); > + return number >= 0 && number < ARCH_NR_GPIOS; > } > > -static inline void gpio_set_value(unsigned int gpio, int value) > +struct device; > + > +/* caller holds gpio_lock *OR* gpio is marked as requested */ > +static inline struct gpio_chip *gpio_to_chip(unsigned gpio) > { > - __gpio_set_value(gpio, value); > + return gpiod_to_chip(gpio_to_desc(gpio)); > } > > -static inline int gpio_cansleep(unsigned int gpio) > +/* Always use the library code for GPIO management calls, > + * or when sleeping may be involved. > + */ > +extern int gpio_request(unsigned gpio, const char *label); > +extern void gpio_free(unsigned gpio); > + > +static inline int gpio_direction_input(unsigned gpio) > +{ > + return gpiod_direction_input(gpio_to_desc(gpio)); > +} > +static inline int gpio_direction_output(unsigned gpio, int value) > +{ > + return gpiod_direction_output_raw(gpio_to_desc(gpio), value); > +} > + > +static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) > { > - return __gpio_cansleep(gpio); > + return gpiod_set_debounce(gpio_to_desc(gpio), debounce); > } > > -static inline int gpio_to_irq(unsigned int gpio) > +static inline int gpio_get_value_cansleep(unsigned gpio) > +{ > + return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio)); > +} > +static inline void gpio_set_value_cansleep(unsigned gpio, int value) > +{ > + return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value); > +} > + > +static inline int gpio_get_value(unsigned gpio) > +{ > + return gpiod_get_raw_value(gpio_to_desc(gpio)); > +} > +static inline void gpio_set_value(unsigned gpio, int value) > +{ > + return gpiod_set_raw_value(gpio_to_desc(gpio), value); > +} > + > +static inline int gpio_cansleep(unsigned gpio) > +{ > + return gpiod_cansleep(gpio_to_desc(gpio)); > +} > + > +static inline int gpio_to_irq(unsigned gpio) > +{ > + return gpiod_to_irq(gpio_to_desc(gpio)); > +} > + > +extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); > +extern int gpio_request_array(const struct gpio *array, size_t num); > +extern void gpio_free_array(const struct gpio *array, size_t num); > + > +/* > + * A sysfs interface can be exported by individual drivers if they want, > + * but more typically is configured entirely from userspace. > + */ > +static inline int gpio_export(unsigned gpio, bool direction_may_change) > +{ > + return gpiod_export(gpio_to_desc(gpio), direction_may_change); > +} > + > +static inline int gpio_export_link(struct device *dev, const char *name, > + unsigned gpio) > +{ > + return gpiod_export_link(dev, name, gpio_to_desc(gpio)); > +} > + > +static inline void gpio_unexport(unsigned gpio) > { > - return __gpio_to_irq(gpio); > + gpiod_unexport(gpio_to_desc(gpio)); > } > > /* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */ > -- > 2.29.2 >
diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h index 27f32cc81da6..2cefe8445980 100644 --- a/arch/m68k/include/asm/mcfgpio.h +++ b/arch/m68k/include/asm/mcfgpio.h @@ -9,7 +9,7 @@ #define mcfgpio_h #ifdef CONFIG_GPIOLIB -#include <asm-generic/gpio.h> +#include <linux/gpio.h> #else int __mcfgpio_get_value(unsigned gpio); diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index cb5afaa7ed48..8122c3a8d659 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -7,6 +7,7 @@ */ #include <linux/gpio/driver.h> +#include <linux/gpio.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/clk.h> @@ -23,8 +24,6 @@ #include <linux/irqchip/chained_irq.h> #include <linux/spinlock.h> -#include <asm-generic/gpio.h> - #define MAX_REGS_BANKS 5 #define MAX_INT_PER_BANK 32 diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index ffe39336fcac..976607758e98 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -28,7 +28,7 @@ #ifdef CONFIG_GPIOLIB #include "../gpio/gpiolib.h" -#include <asm-generic/gpio.h> +#include <linux/gpio.h> #endif #include "core.h" diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h deleted file mode 100644 index aea9aee1f3e9..000000000000 --- a/include/asm-generic/gpio.h +++ /dev/null @@ -1,172 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_GENERIC_GPIO_H -#define _ASM_GENERIC_GPIO_H - -#include <linux/types.h> -#include <linux/errno.h> - -#ifdef CONFIG_GPIOLIB - -#include <linux/compiler.h> -#include <linux/gpio/driver.h> -#include <linux/gpio/consumer.h> - -/* Platforms may implement their GPIO interface with library code, - * at a small performance cost for non-inlined operations and some - * extra memory (for code and for per-GPIO table entries). - * - * While the GPIO programming interface defines valid GPIO numbers - * to be in the range 0..MAX_INT, this library restricts them to the - * smaller range 0..ARCH_NR_GPIOS-1. - * - * ARCH_NR_GPIOS is somewhat arbitrary; it usually reflects the sum of - * builtin/SoC GPIOs plus a number of GPIOs on expanders; the latter is - * actually an estimate of a board-specific value. - */ - -#ifndef ARCH_NR_GPIOS -#if defined(CONFIG_ARCH_NR_GPIO) && CONFIG_ARCH_NR_GPIO > 0 -#define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO -#else -#define ARCH_NR_GPIOS 512 -#endif -#endif - -/* - * "valid" GPIO numbers are nonnegative and may be passed to - * setup routines like gpio_request(). only some valid numbers - * can successfully be requested and used. - * - * Invalid GPIO numbers are useful for indicating no-such-GPIO in - * platform data and other tables. - */ - -static inline bool gpio_is_valid(int number) -{ - return number >= 0 && number < ARCH_NR_GPIOS; -} - -struct device; -struct gpio; -struct seq_file; -struct module; -struct device_node; -struct gpio_desc; - -/* caller holds gpio_lock *OR* gpio is marked as requested */ -static inline struct gpio_chip *gpio_to_chip(unsigned gpio) -{ - return gpiod_to_chip(gpio_to_desc(gpio)); -} - -/* Always use the library code for GPIO management calls, - * or when sleeping may be involved. - */ -extern int gpio_request(unsigned gpio, const char *label); -extern void gpio_free(unsigned gpio); - -static inline int gpio_direction_input(unsigned gpio) -{ - return gpiod_direction_input(gpio_to_desc(gpio)); -} -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return gpiod_direction_output_raw(gpio_to_desc(gpio), value); -} - -static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) -{ - return gpiod_set_debounce(gpio_to_desc(gpio), debounce); -} - -static inline int gpio_get_value_cansleep(unsigned gpio) -{ - return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio)); -} -static inline void gpio_set_value_cansleep(unsigned gpio, int value) -{ - return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value); -} - - -/* A platform's <asm/gpio.h> code may want to inline the I/O calls when - * the GPIO is constant and refers to some always-present controller, - * giving direct access to chip registers and tight bitbanging loops. - */ -static inline int __gpio_get_value(unsigned gpio) -{ - return gpiod_get_raw_value(gpio_to_desc(gpio)); -} -static inline void __gpio_set_value(unsigned gpio, int value) -{ - return gpiod_set_raw_value(gpio_to_desc(gpio), value); -} - -static inline int __gpio_cansleep(unsigned gpio) -{ - return gpiod_cansleep(gpio_to_desc(gpio)); -} - -static inline int __gpio_to_irq(unsigned gpio) -{ - return gpiod_to_irq(gpio_to_desc(gpio)); -} - -extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); -extern int gpio_request_array(const struct gpio *array, size_t num); -extern void gpio_free_array(const struct gpio *array, size_t num); - -/* - * A sysfs interface can be exported by individual drivers if they want, - * but more typically is configured entirely from userspace. - */ -static inline int gpio_export(unsigned gpio, bool direction_may_change) -{ - return gpiod_export(gpio_to_desc(gpio), direction_may_change); -} - -static inline int gpio_export_link(struct device *dev, const char *name, - unsigned gpio) -{ - return gpiod_export_link(dev, name, gpio_to_desc(gpio)); -} - -static inline void gpio_unexport(unsigned gpio) -{ - gpiod_unexport(gpio_to_desc(gpio)); -} - -#else /* !CONFIG_GPIOLIB */ - -#include <linux/kernel.h> - -static inline bool gpio_is_valid(int number) -{ - /* only non-negative numbers are valid */ - return number >= 0; -} - -/* platforms that don't directly support access to GPIOs through I2C, SPI, - * or other blocking infrastructure can use these wrappers. - */ - -static inline int gpio_cansleep(unsigned gpio) -{ - return 0; -} - -static inline int gpio_get_value_cansleep(unsigned gpio) -{ - might_sleep(); - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value_cansleep(unsigned gpio, int value) -{ - might_sleep(); - __gpio_set_value(gpio, value); -} - -#endif /* !CONFIG_GPIOLIB */ - -#endif /* _ASM_GENERIC_GPIO_H */ diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 7e6b1b8277ca..c19256f67e02 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -54,26 +54,124 @@ struct gpio { }; #ifdef CONFIG_GPIOLIB -#include <asm-generic/gpio.h> -static inline int gpio_get_value(unsigned int gpio) +#include <linux/compiler.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> + +/* Platforms may implement their GPIO interface with library code, + * at a small performance cost for non-inlined operations and some + * extra memory (for code and for per-GPIO table entries). + * + * While the GPIO programming interface defines valid GPIO numbers + * to be in the range 0..MAX_INT, this library restricts them to the + * smaller range 0..ARCH_NR_GPIOS-1. + * + * ARCH_NR_GPIOS is somewhat arbitrary; it usually reflects the sum of + * builtin/SoC GPIOs plus a number of GPIOs on expanders; the latter is + * actually an estimate of a board-specific value. + */ + +#ifndef ARCH_NR_GPIOS +#if defined(CONFIG_ARCH_NR_GPIO) && CONFIG_ARCH_NR_GPIO > 0 +#define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO +#else +#define ARCH_NR_GPIOS 512 +#endif +#endif + +/* + * "valid" GPIO numbers are nonnegative and may be passed to + * setup routines like gpio_request(). only some valid numbers + * can successfully be requested and used. + * + * Invalid GPIO numbers are useful for indicating no-such-GPIO in + * platform data and other tables. + */ + +static inline bool gpio_is_valid(int number) { - return __gpio_get_value(gpio); + return number >= 0 && number < ARCH_NR_GPIOS; } -static inline void gpio_set_value(unsigned int gpio, int value) +struct device; + +/* caller holds gpio_lock *OR* gpio is marked as requested */ +static inline struct gpio_chip *gpio_to_chip(unsigned gpio) { - __gpio_set_value(gpio, value); + return gpiod_to_chip(gpio_to_desc(gpio)); } -static inline int gpio_cansleep(unsigned int gpio) +/* Always use the library code for GPIO management calls, + * or when sleeping may be involved. + */ +extern int gpio_request(unsigned gpio, const char *label); +extern void gpio_free(unsigned gpio); + +static inline int gpio_direction_input(unsigned gpio) +{ + return gpiod_direction_input(gpio_to_desc(gpio)); +} +static inline int gpio_direction_output(unsigned gpio, int value) +{ + return gpiod_direction_output_raw(gpio_to_desc(gpio), value); +} + +static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) { - return __gpio_cansleep(gpio); + return gpiod_set_debounce(gpio_to_desc(gpio), debounce); } -static inline int gpio_to_irq(unsigned int gpio) +static inline int gpio_get_value_cansleep(unsigned gpio) +{ + return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio)); +} +static inline void gpio_set_value_cansleep(unsigned gpio, int value) +{ + return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value); +} + +static inline int gpio_get_value(unsigned gpio) +{ + return gpiod_get_raw_value(gpio_to_desc(gpio)); +} +static inline void gpio_set_value(unsigned gpio, int value) +{ + return gpiod_set_raw_value(gpio_to_desc(gpio), value); +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return gpiod_cansleep(gpio_to_desc(gpio)); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return gpiod_to_irq(gpio_to_desc(gpio)); +} + +extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); +extern int gpio_request_array(const struct gpio *array, size_t num); +extern void gpio_free_array(const struct gpio *array, size_t num); + +/* + * A sysfs interface can be exported by individual drivers if they want, + * but more typically is configured entirely from userspace. + */ +static inline int gpio_export(unsigned gpio, bool direction_may_change) +{ + return gpiod_export(gpio_to_desc(gpio), direction_may_change); +} + +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + return gpiod_export_link(dev, name, gpio_to_desc(gpio)); +} + +static inline void gpio_unexport(unsigned gpio) { - return __gpio_to_irq(gpio); + gpiod_unexport(gpio_to_desc(gpio)); } /* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */