From patchwork Mon Nov 8 15:05:53 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Conor Dooley X-Patchwork-Id: 1552393 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=microchip.com header.i=@microchip.com header.a=rsa-sha256 header.s=mchp header.b=dGs1vT+8; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Hnvdp3P5dz9s0r for ; Tue, 9 Nov 2021 02:09:02 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S240849AbhKHPLo (ORCPT ); Mon, 8 Nov 2021 10:11:44 -0500 Received: from esa.microchip.iphmx.com ([68.232.154.123]:23970 "EHLO esa.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S240847AbhKHPKb (ORCPT ); Mon, 8 Nov 2021 10:10:31 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1636384067; x=1667920067; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=4/7M3z76kv/YIpEtNq9m5VDAc2/s3Mft4/JhKERxudg=; b=dGs1vT+8yzApQa0WeOnLOB143QK4lo8Cj569DCNQr/e1ADcoemCgHuLf TtBKjVoctVwWWTNRJzFlBXxWG3WRjajVm80Atw3YHXjXerVpfCUBXOh5b fo4DjdFxU1LgAOT4BFO905Ul4Ljhy+hwuMgtUwv1N0tt92qHcBGvt3qxA 0t5/NIXsKgKecbfYAiIL6kbIfdbgCl8hvMUVw20nMXeHlzpRhMmX77FHs OZOAZBQJgee6vrz8mcLT9b1SqdtLOogoxaBY3DiZmjitWbIZdejYmI3lH BO+dqUHHY5EOtlnk2C+mGWO2DNnINbj7l7SXG6nAAQZCY3pwiZRZrklvf g==; IronPort-SDR: YN2AR1VoMRvQBh188H0EcEz8m9Hn1Wq0xii8FddSzHY7Ls1iEjaqT+4ASvsR9qp40rF+ZyJKMi P4KouHnUqGS3tb9eIy6A70VhdZoweMmPeleigmq7+4UQVh16gaVdzuBeVx8V7y4rcT3oGfqhmo flMCuR1OMs1L9B5uKvg8gJUanhKz+mFmbuxn5PXcRjbTjrujOWuS78H631V6KimfaLQ9QkCt1p Ns8R3TIWHuXElVSNs2J0b03e5JqOzBaaFR32jx6Fyzb4LYpOmwNj3+N39cAeT+thVilF3e/zLS O9eqEO9BK+6J+wcETh0PEbvh X-IronPort-AV: E=Sophos;i="5.87,218,1631602800"; d="scan'208";a="138382851" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa2.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 08 Nov 2021 08:07:45 -0700 Received: from chn-vm-ex03.mchp-main.com (10.10.85.151) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.14; Mon, 8 Nov 2021 08:07:43 -0700 Received: from wendy.microchip.com (10.10.115.15) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server id 15.1.2176.14 via Frontend Transport; Mon, 8 Nov 2021 08:07:39 -0700 From: To: , , , , , , , , , , , , , , , , , , , , , , , , CC: , , Subject: [PATCH 12/13] riscv: icicle-kit: update microchip icicle kit device tree Date: Mon, 8 Nov 2021 15:05:53 +0000 Message-ID: <20211108150554.4457-13-conor.dooley@microchip.com> X-Mailer: git-send-email 2.33.1 In-Reply-To: <20211108150554.4457-1-conor.dooley@microchip.com> References: <20211108150554.4457-1-conor.dooley@microchip.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org From: Conor Dooley Update the device tree for the icicle kit by splitting it into a third part, which contains peripherals in the fpga fabric, add new peripherals (spi, qspi, gpio, rtc, pcie, system services, i2c), update parts of the memory map which have been changed. Signed-off-by: Conor Dooley --- .../dts/microchip/microchip-mpfs-fabric.dtsi | 21 ++ .../microchip/microchip-mpfs-icicle-kit.dts | 159 +++++++-- .../boot/dts/microchip/microchip-mpfs.dtsi | 333 ++++++++++++++---- 3 files changed, 428 insertions(+), 85 deletions(-) create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi new file mode 100644 index 000000000000..8fa3356494f1 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/ { + fpgadma: fpgadma@60020000 { + compatible = "microchip,mpfs-fpga-dma-uio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x60020000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = ; + status = "okay"; + }; + + fpgalsram: fpga_lsram@61000000 { + compatible = "generic-uio"; + reg = <0x0 0x61000000 0x0 0x0001000 + 0x14 0x00000000 0x0 0x00010000>; + status = "okay"; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts index fc1e5869df1b..4212129fcdf1 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts @@ -1,5 +1,5 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020 Microchip Technology Inc */ +/* Copyright (c) 2020-2021 Microchip Technology Inc */ /dts-v1/; @@ -13,72 +13,187 @@ / { compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs"; aliases { - ethernet0 = &emac1; - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; + mmuart0 = &mmuart0; + mmuart1 = &mmuart1; + mmuart2 = &mmuart2; + mmuart3 = &mmuart3; + mmuart4 = &mmuart4; }; chosen { - stdout-path = "serial0:115200n8"; + stdout-path = "mmuart1:115200n8"; }; cpus { timebase-frequency = ; }; - memory@80000000 { + ddrc_cache_lo: memory@80000000 { device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x40000000>; - clocks = <&clkcfg 26>; + reg = <0x0 0x80000000 0x0 0x2e000000>; + clocks = <&clkcfg CLK_DDRC>; + status = "okay"; + }; + + ddrc_cache_hi: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x0 0x0 0x40000000>; + clocks = <&clkcfg CLK_DDRC>; + status = "okay"; }; }; -&serial0 { +&mmuart1 { status = "okay"; }; -&serial1 { +&mmuart2 { status = "okay"; }; -&serial2 { +&mmuart3 { status = "okay"; }; -&serial3 { +&mmuart4 { status = "okay"; }; &mmc { status = "okay"; - bus-width = <4>; disable-wp; cap-sd-highspeed; + cap-mmc-highspeed; card-detect-delay = <200>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; }; -&emac0 { +&spi0 { + status = "okay"; + spidev@0 { + compatible = "spidev"; + reg = <0>; /* CS 0 */ + spi-max-frequency = <10000000>; + status = "okay"; + }; +}; + +&spi1 { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pac193x: pac193x@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + samp-rate = <64>; + status = "okay"; + ch0: channel0 { + uohms-shunt-res = <10000>; + rail-name = "VDDREG"; + channel_enabled; + }; + ch1: channel1 { + uohms-shunt-res = <10000>; + rail-name = "VDDA25"; + channel_enabled; + }; + ch2: channel2 { + uohms-shunt-res = <10000>; + rail-name = "VDD25"; + channel_enabled; + }; + ch3: channel3 { + uohms-shunt-res = <10000>; + rail-name = "VDDA_REG"; + channel_enabled; + }; + }; +}; + +&mac0 { + status = "okay"; phy-mode = "sgmii"; phy-handle = <&phy0>; - phy0: ethernet-phy@8 { - reg = <8>; - ti,fifo-depth = <0x01>; - }; }; -&emac1 { +&mac1 { status = "okay"; phy-mode = "sgmii"; phy-handle = <&phy1>; phy1: ethernet-phy@9 { reg = <9>; - ti,fifo-depth = <0x01>; + ti,fifo-depth = <0x1>; + }; + phy0: ethernet-phy@8 { + reg = <8>; + ti,fifo-depth = <0x1>; }; }; + +&gpio2 { + interrupts = ; + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&mbox { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi index c9f6d205d2ba..805e07f0169e 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi @@ -1,7 +1,10 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020 Microchip Technology Inc */ +/* Copyright (c) 2020-2021 Microchip Technology Inc */ -/dts-v1/; +#include "dt-bindings/clock/microchip,mpfs-clock.h" +#include "dt-bindings/interrupt-controller/microchip,mpfs-plic.h" +#include "dt-bindings/interrupt-controller/riscv-hart.h" +#include "microchip-mpfs-fabric.dtsi" / { #address-cells = <2>; @@ -16,8 +19,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { - clock-frequency = <0>; + cpu0: cpu@0 { compatible = "sifive,e51", "sifive,rocket0", "riscv"; device_type = "cpu"; i-cache-block-size = <64>; @@ -25,6 +27,7 @@ cpu@0 { i-cache-size = <16384>; reg = <0>; riscv,isa = "rv64imac"; + clocks = <&clkcfg CLK_CPU>; status = "disabled"; cpu0_intc: interrupt-controller { @@ -34,8 +37,7 @@ cpu0_intc: interrupt-controller { }; }; - cpu@1 { - clock-frequency = <0>; + cpu1: cpu@1 { compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; @@ -51,6 +53,7 @@ cpu@1 { mmu-type = "riscv,sv39"; reg = <1>; riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; tlb-split; status = "okay"; @@ -61,8 +64,7 @@ cpu1_intc: interrupt-controller { }; }; - cpu@2 { - clock-frequency = <0>; + cpu2: cpu@2 { compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; @@ -78,6 +80,7 @@ cpu@2 { mmu-type = "riscv,sv39"; reg = <2>; riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; tlb-split; status = "okay"; @@ -88,8 +91,7 @@ cpu2_intc: interrupt-controller { }; }; - cpu@3 { - clock-frequency = <0>; + cpu3: cpu@3 { compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; @@ -105,6 +107,7 @@ cpu@3 { mmu-type = "riscv,sv39"; reg = <3>; riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; tlb-split; status = "okay"; @@ -115,8 +118,7 @@ cpu3_intc: interrupt-controller { }; }; - cpu@4 { - clock-frequency = <0>; + cpu4: cpu@4 { compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; @@ -132,8 +134,10 @@ cpu@4 { mmu-type = "riscv,sv39"; reg = <4>; riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; tlb-split; status = "okay"; + cpu4_intc: interrupt-controller { #interrupt-cells = <1>; compatible = "riscv,cpu-intc"; @@ -145,49 +149,55 @@ cpu4_intc: interrupt-controller { soc { #address-cells = <2>; #size-cells = <2>; - compatible = "simple-bus"; + compatible = "microchip,mpfs-soc", "simple-bus"; ranges; - cache-controller@2010000 { + cctrllr: cache-controller@2010000 { compatible = "sifive,fu540-c000-ccache", "cache"; + reg = <0x0 0x2010000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = ; cache-block-size = <64>; cache-level = <2>; cache-sets = <1024>; cache-size = <2097152>; cache-unified; - interrupt-parent = <&plic>; - interrupts = <1 2 3>; - reg = <0x0 0x2010000 0x0 0x1000>; }; - clint@2000000 { + clint: clint@2000000 { compatible = "sifive,fu540-c000-clint", "sifive,clint0"; reg = <0x0 0x2000000 0x0 0xC000>; - interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 - &cpu1_intc 3 &cpu1_intc 7 - &cpu2_intc 3 &cpu2_intc 7 - &cpu3_intc 3 &cpu3_intc 7 - &cpu4_intc 3 &cpu4_intc 7>; + interrupts-extended = + <&cpu0_intc HART_INT_M_SOFT &cpu0_intc HART_INT_M_TIMER + &cpu1_intc HART_INT_M_SOFT &cpu1_intc HART_INT_M_TIMER + &cpu2_intc HART_INT_M_SOFT &cpu2_intc HART_INT_M_TIMER + &cpu3_intc HART_INT_M_SOFT &cpu3_intc HART_INT_M_TIMER + &cpu4_intc HART_INT_M_SOFT &cpu4_intc HART_INT_M_TIMER>; }; plic: interrupt-controller@c000000 { - #interrupt-cells = <1>; - compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; + compatible = "sifive,plic-1.0.0"; reg = <0x0 0xc000000 0x0 0x4000000>; + #interrupt-cells = <1>; riscv,ndev = <186>; interrupt-controller; - interrupts-extended = <&cpu0_intc 11 - &cpu1_intc 11 &cpu1_intc 9 - &cpu2_intc 11 &cpu2_intc 9 - &cpu3_intc 11 &cpu3_intc 9 - &cpu4_intc 11 &cpu4_intc 9>; + interrupts-extended = <&cpu0_intc HART_INT_M_EXT + &cpu1_intc HART_INT_M_EXT &cpu1_intc HART_INT_S_EXT + &cpu2_intc HART_INT_M_EXT &cpu2_intc HART_INT_S_EXT + &cpu3_intc HART_INT_M_EXT &cpu3_intc HART_INT_S_EXT + &cpu4_intc HART_INT_M_EXT &cpu4_intc HART_INT_S_EXT>; }; - dma@3000000 { - compatible = "sifive,fu540-c000-pdma"; + pdma: pdma@3000000 { + compatible = "microchip,mpfs-pdma-uio"; reg = <0x0 0x3000000 0x0 0x8000>; interrupt-parent = <&plic>; - interrupts = <23 24 25 26 27 28 29 30>; + interrupts = ; #dma-cells = <1>; }; @@ -205,7 +215,7 @@ clkcfg: clkcfg@20002000 { clocks = <&refclk>; #clock-cells = <1>; clock-output-names = "cpu", "axi", "ahb", "envm", /* 0-3 */ - "mac0", "mac1", "mmc", "timer", /* 4-7 */ + "mac0", "mac1", "mmc", "timer", /* 4-7 */ "mmuart0", "mmuart1", "mmuart2", "mmuart3", /* 8-11 */ "mmuart4", "spi0", "spi1", "i2c0", /* 12-15 */ "i2c1", "can0", "can1", "usb", /* 16-19 */ @@ -214,90 +224,287 @@ clkcfg: clkcfg@20002000 { "fic1", "fic2", "fic3", "athena", "cfm"; /* 28-32 */ }; - serial0: serial@20000000 { + mmuart0: serial@20000000 { compatible = "ns16550a"; reg = <0x0 0x20000000 0x0 0x400>; reg-io-width = <4>; reg-shift = <2>; + clocks = <&clkcfg CLK_MMUART0>; interrupt-parent = <&plic>; - interrupts = <90>; + interrupts = ; current-speed = <115200>; - clocks = <&clkcfg 8>; - status = "disabled"; + status = "disabled"; /* Reserved for the HSS */ }; - serial1: serial@20100000 { + mmuart1: serial@20100000 { compatible = "ns16550a"; reg = <0x0 0x20100000 0x0 0x400>; reg-io-width = <4>; reg-shift = <2>; + clocks = <&clkcfg CLK_MMUART1>; interrupt-parent = <&plic>; - interrupts = <91>; + interrupts = ; current-speed = <115200>; - clocks = <&clkcfg 9>; status = "disabled"; }; - serial2: serial@20102000 { + mmuart2: serial@20102000 { compatible = "ns16550a"; reg = <0x0 0x20102000 0x0 0x400>; reg-io-width = <4>; reg-shift = <2>; + clocks = <&clkcfg CLK_MMUART2>; interrupt-parent = <&plic>; - interrupts = <92>; + interrupts = ; current-speed = <115200>; - clocks = <&clkcfg 10>; status = "disabled"; }; - serial3: serial@20104000 { + mmuart3: serial@20104000 { compatible = "ns16550a"; reg = <0x0 0x20104000 0x0 0x400>; reg-io-width = <4>; reg-shift = <2>; + clocks = <&clkcfg CLK_MMUART3>; + interrupt-parent = <&plic>; + interrupts = ; + current-speed = <115200>; + status = "disabled"; + }; + + mmuart4: serial@20106000 { + compatible = "ns16550a"; + reg = <0x0 0x20106000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + clocks = <&clkcfg CLK_MMUART4>; interrupt-parent = <&plic>; - interrupts = <93>; + interrupts = ; current-speed = <115200>; - clocks = <&clkcfg 11>; status = "disabled"; }; - /* Common node entry for emmc/sd */ - mmc: mmc@20008000 { + mmc: mmc@20008000 { /* Common node entry for emmc/sd */ compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc"; reg = <0x0 0x20008000 0x0 0x1000>; + clocks = <&clkcfg CLK_MMC>; interrupt-parent = <&plic>; - interrupts = <88 89>; - clocks = <&clkcfg 6>; + interrupts = ; max-frequency = <200000000>; status = "disabled"; }; - emac0: ethernet@20110000 { - compatible = "cdns,macb"; - reg = <0x0 0x20110000 0x0 0x2000>; + spi0: spi@20108000 { + compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20108000 0x0 0x1000>; + clocks = <&clkcfg CLK_SPI0>; interrupt-parent = <&plic>; - interrupts = <64 65 66 67>; - local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg 4>, <&clkcfg 2>; - clock-names = "pclk", "hclk"; + interrupts = ; + spi-max-frequency = <25000000>; + num-cs = <8>; + status = "disabled"; + }; + + spi1: spi@20109000 { + compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20109000 0x0 0x1000>; + clocks = <&clkcfg CLK_SPI1>; + interrupt-parent = <&plic>; + interrupts = ; + spi-max-frequency = <25000000>; + num-cs = <8>; + status = "disabled"; + }; + + qspi: qspi@21000000 { + compatible = "microchip,mpfs-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21000000 0x0 0x1000>; + clocks = <&clkcfg CLK_QSPI>; + interrupt-parent = <&plic>; + interrupts = ; + spi-max-frequency = <25000000>; + num-cs = <8>; + status = "disabled"; + }; + + i2c0: i2c@2010a000 { + compatible = "microchip,mpfs-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010a000 0x0 0x1000>; + clocks = <&clkcfg CLK_I2C0>; + interrupt-parent = <&plic>; + interrupts = ; + clock-frequency = <100000>; status = "disabled"; + }; + + i2c1: i2c@2010b000 { + compatible = "microchip,mpfs-i2c"; #address-cells = <1>; #size-cells = <0>; + reg = <0x0 0x2010b000 0x0 0x1000>; + clocks = <&clkcfg CLK_I2C1>; + interrupt-parent = <&plic>; + interrupts = ; + clock-frequency = <100000>; + status = "disabled"; }; - emac1: ethernet@20112000 { + mac0: ethernet@20110000 { compatible = "cdns,macb"; - reg = <0x0 0x20112000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20110000 0x0 0x2000>; + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; interrupt-parent = <&plic>; - interrupts = <70 71 72 73>; - local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg 5>, <&clkcfg 2>; + interrupts = ; + mac-address = [56 34 12 00 FC 01]; status = "disabled"; + }; + + mac1: ethernet@20112000 { + compatible = "cdns,macb"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20112000 0x0 0x2000>; + clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; clock-names = "pclk", "hclk"; + interrupt-parent = <&plic>; + interrupts = ; + mac-address = [56 34 12 00 FC 02]; + status = "disabled"; + }; + + gpio0: gpio@20120000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20120000 0x0 0x1000>; + clocks = <&clkcfg CLK_GPIO0>; + interrupt-parent = <&plic>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio@20121000 { + compatible = "microchip,mpfs-gpio"; + reg = <000 0x20121000 0x0 0x1000>; + clocks = <&clkcfg CLK_GPIO1>; + interrupt-parent = <&plic>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio2: gpio@20122000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20122000 0x0 0x1000>; + clocks = <&clkcfg CLK_GPIO2>; + interrupt-parent = <&plic>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rtc: rtc@20124000 { + compatible = "microchip,mpfs-rtc"; #address-cells = <1>; #size-cells = <0>; + reg = <0x0 0x20124000 0x0 0x1000>; + clocks = <&clkcfg CLK_RTC>; + clock-names = "rtc"; + interrupt-parent = <&plic>; + interrupts = ; + status = "disabled"; }; + usb: usb@20201000 { + compatible = "microchip,mpfs-usb-host"; + reg = <0x0 0x20201000 0x0 0x1000>; + reg-names = "mc","control"; + clocks = <&clkcfg CLK_USB>; + interrupt-parent = <&plic>; + interrupts = ; + interrupt-names = "dma","mc"; + dr_mode = "host"; + status = "disabled"; + }; + + mbox: mailbox@37020000 { + compatible = "microchip,mpfs-mailbox"; + reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; + interrupt-parent = <&plic>; + interrupts = ; + #mbox-cells = <1>; + status = "disabled"; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000 0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + clocks = <&clkcfg CLK_FIC0>, <&clkcfg CLK_FIC1>, <&clkcfg CLK_FIC3>; + clock-names = "fic0", "fic1", "fic3"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = ; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + mchp,axi-m-atr0 = <0x10 0x0>; + status = "disabled"; + pcie_intc: legacy-interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + syscontroller: syscontroller { + compatible = "microchip,mpfs-sys-controller"; + #address-cells = <1>; + #size-cells = <1>; + mboxes = <&mbox 0>; + }; + + hwrandom: hwrandom { + compatible = "microchip,mpfs-rng"; + #address-cells = <1>; + #size-cells = <1>; + syscontroller = <&syscontroller>; + }; + + sysserv: sysserv { + compatible = "microchip,mpfs-generic-service"; + #address-cells = <1>; + #size-cells = <1>; + syscontroller = <&syscontroller>; + }; }; };